diff --git a/(EN)-HowTo---All-important-thing-you-should-know.md b/(EN)-HowTo---All-important-thing-you-should-know.md
index 344bb99..3f1f8f3 100644
--- a/(EN)-HowTo---All-important-thing-you-should-know.md
+++ b/(EN)-HowTo---All-important-thing-you-should-know.md
@@ -114,11 +114,28 @@ use_blueprint:
 
 ## 3. Update ESPHome
 
->IMPORTANT: To install a new version of the NSPanel, the Blueprint, ESPHome and the TFT must be updated!
+***IMPORTANT:***
+- *To install a new version of the NSPanel, the Blueprint, ESPHome and the TFT must be updated!*
+- *These instructions are for updating a panel where an older version of these files are already installed.*
 
-To update ESPHome go to the ESPHome integration. There click on "Update All":![ESPHome Update0](./(DE)-HowTo---Alle-wichtigen-Dinge-die-man-wissen-sollte.assets/ESPHome Update0.PNG)
+To flash your panel with an updated version from this project, go to the ESPHome dashboard (in your Home Assistant) and find the device you want to update. Then click the 3-dot menu and select the option "Validate":
+
+![image](https://github.com/Blackymas/NSPanel_HA_Blueprint/assets/94725493/e393ced5-78d4-475a-8630-893c05734f5d)
+
+The system will go thru all the settings, combining your entries in "substitutions" and the ESPHome file(s) from the GitHub repository and validate the final setup. It might take some time.
+
+If everything goes well, you will see a green check mark in the top of the dialog window. When you get that, you can click "Install":
+
+![image](https://github.com/Blackymas/NSPanel_HA_Blueprint/assets/94725493/bc67533b-4f2e-4034-8e7e-34063a26f1c3)
+
+As your panel is probably already connected to the Wi-Fi, you may select to install "Wirelessly", as it is much easier and you don't have to unassemble your panel.
+
+![image](https://github.com/Blackymas/NSPanel_HA_Blueprint/assets/94725493/c9b53549-c78a-4a02-bcde-31582905d0c4)
+
+The new firmware will be built and then flashed to your panel, which will restart at the end of this process and start sending logs again:
+
+![image](https://github.com/Blackymas/NSPanel_HA_Blueprint/assets/94725493/e63dcb4a-ef74-4665-9897-455e02950964)
 
-The update process may take a few minutes.![ESPHome Update](./(DE)-HowTo---Alle-wichtigen-Dinge-die-man-wissen-sollte.assets/ESPHome Update.PNG)
 
 ------