diff --git a/(EN)-Common-Issues-TFT-Upload.md b/(EN)-Common-Issues-TFT-Upload.md
index 0883bd1..faf8b4b 100644
--- a/(EN)-Common-Issues-TFT-Upload.md
+++ b/(EN)-Common-Issues-TFT-Upload.md
@@ -37,7 +37,11 @@ Cut the power supply off, wait a bit, and power on again. It usually helps when
 If your panel is already installed in your wall, you probably can still power cycle using your power relay connected to that room.
 
  
-#### 7. Try an alternative http service. There are many options available for free to run under you local Windows, MAC or Linux machine.
+#### 7. Flash your panel again
+Remove all add-ons and non-essential customization, flash your panel again (you can do this over the air/wirelessly), try to update the TFT, add the add-ons and removed customization back and then flash it again.
+
+ 
+#### 8. Try an alternative http service. There are many options available for free to run under you local Windows, MAC or Linux machine.
 Just to name some:
 - NGINX
 - IIS
@@ -46,7 +50,7 @@ Just to name some:
 - etc.
 
  
-#### 8. "Exit reparse" button
+#### 9. "Exit reparse" button
 One of the biggest challenges to a new user is to upload the TFT file for the first time. This is due to Sonoff using the [Protocol Reparse Mode](https://nextion.tech/instruction-set/#:~:text=20-,Advanced.,the%20serial%20buffer%20for%20processing) to control the communication with the Nextion display. This prevents ESPHome to communicate with the display using its default libraries and therefore prevents installing the new TFT.
 With this version you will have a new button named "Exit reparse", which will send a command to the Nextion to exit that mode for a few seconds, giving to the use a chance to then upload the TFT file without the need to change your ESPHome settings or using older Nextion libraries.
 ![image](https://user-images.githubusercontent.com/94725493/235167581-50070e44-fff8-46b9-a036-c6b60b278d77.png)
@@ -60,7 +64,7 @@ d. While the new page is shown (it will be there for just a couple of seconds),
 e. You should then see the progress bar in your display and after no more than 20 minutes the new TFT will be displayed
 
  
-#### 9. Use an older Nextion library for ESPHome
+#### 10. Use an older Nextion library for ESPHome
 
 If the error persists after trying all the options above, please try ending your ESPHOME with this and then press `Upload TFT` button:
 ```yaml