From 255eaeacb299c9b6e8f6c7a364b619259726eb69 Mon Sep 17 00:00:00 2001
From: Blackymas <41958506+Blackymas@users.noreply.github.com>
Date: Mon, 23 Jan 2023 22:26:45 +0100
Subject: [PATCH] Updated (EN) First Steps   Installation and Setup (markdown)

---
 (EN)-First-Steps---Installation-and-Setup.md | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/(EN)-First-Steps---Installation-and-Setup.md b/(EN)-First-Steps---Installation-and-Setup.md
index bf7490a..4c79f6a 100644
--- a/(EN)-First-Steps---Installation-and-Setup.md
+++ b/(EN)-First-Steps---Installation-and-Setup.md
@@ -53,12 +53,12 @@ This section covers the initial configuration. All important steps for installat
 
 ### 5. When the new ESP32 device has been created, next click _**"Edit "**_ on the device you have just created to open the web editor. Now the following code must be copied and pasted.
 
-> _**IMPORTANT!**_ The already existing code in the ESPHome file must be _**"COMPLETELY "**_ deleted and _**"REPLACED "**_ by the code below.
+> ❗ _**IMPORTANT!**_ The already existing code in the ESPHome file must be _**"COMPLETELY "**_ deleted and _**"REPLACED "**_ by the code below.
 
-> _**IMPORTANT!**_ in the block _**"CHANGE ME "**_ all values _**(device_name, wifi_ssid, wifi_password, nextion_update_url )**_ in the _**" "**_ must be replaced by your own values. It is also possible to work here with _**"!secret "**_.
+> ❗ _**IMPORTANT!**_ in the block _**"CHANGE ME "**_ all values _**(device_name, wifi_ssid, wifi_password, nextion_update_url )**_ in the _**" "**_ must be replaced by your own values. It is also possible to work here with _**"!secret "**_.
 
 
-> _**ATTENTION!**_ for _**"device_name"**_ max. 15 characters _**[a-z], [0-9] and [\_]**_ may be used and all must be _**"lowercase"**_. Furthermore, characters like _**[-], [SPECIAL CHARACTARS] and [SPACES]**_ are forbidden and will cause problems with the blueprint.
+> ⚠️ _**ATTENTION!**_ for _**"device_name"**_ max. 15 characters _**[a-z], [0-9] and [\_]**_ may be used and all must be _**"lowercase"**_. Furthermore, characters like _**[-], [SPECIAL CHARACTARS] and [SPACES]**_ are forbidden and will cause problems with the blueprint.
 
 **Example:** _**nspanel_kitchen**_
 
@@ -97,7 +97,7 @@ packages:
 
 > This could look like this **_http://192.168.1.1:8123/local/nspanel.tft_**
 
-> _**ATTENTION!**_ You can also comment out the path nextion_update_url: "https://raw.githubusercontent.com/Blackymas/NSPanel_HA_Blueprint/main/nspanel.tft" and load the TFT directly from Github. But it can happen that there are problems with the upload to the NSPanel. It should then look like this
+> ⚠️ _**ATTENTION!**_ You can also comment out the path nextion_update_url: "https://raw.githubusercontent.com/Blackymas/NSPanel_HA_Blueprint/main/nspanel.tft" and load the TFT directly from Github. But it can happen that there are problems with the upload to the NSPanel. It should then look like this
 
 ```
 #  nextion_update_url: "http://HOME-ASSISTANT-IP:8123/local/nspanel.tft" # URL to local tft File