NSPanel_HA_Blueprint/ReleaseNotes.md

Support this project

As always, we would like to thank everyone who donated to this project and remind you that every donation helps to support this project - so if you haven't made a donation yet, now would be a good time ;)

 

General

• Thanks for 600 stars.

 

Updating

Since in this update lots of input to the blueprint changed, we highly recommend you review your settings and make sure all fields have the correct selection. We did our best to support your legacy settings and avoid breaking your system, but please double check your settings if you see something not working as expected.

Files that need to be reloaded:

1. nspanel_blueprint.yaml - v3.5
2. nspanel_eu.tft or nspanel_us.tft - v3.5
3. nspanel_esphome.yaml - v3.5

Instructions

You can find the update procedures following here:

• (EN) HowTo - All important thing you should know - Update
• (DE) HowTo - Alle wichtigen Dinge die man wissen sollte - Update  

Breaking changes

1. New requirements: Home Assistant and ESPHome v2023.5.0 or later.
2. Exisiting users will have o select again the language for the panel, otherwise English will be used to display strings.
3. Removed entity sensor.xxxxx_settings_entity and service esphome.xxxxx_set_settings_entity.
4. Due to the changes on the time display engine, you might have to select your time format again in the blueprint settings.

 

Overview of all changes

1. Alarm control panel
2. Support to sensor display precision from Home Assistant (#880)
3. Filtered device list (#881)
4. New language selector (#882)
5. Removed settings_entity (#887)
6. Support for US model on landscape mode (#890)
7. API status indication on the panel (#5ff5d35)
8. Light & cover settings pages will show only the supported features (#896)
9. New "Fan speed page" (#897)
10. Select wake-up page (#898)
11. Panel's local control
12. Embedded thermostat/heater (#917)

 

Details of all changes

1. Alarm control panel

recommend api-encryption: https://esphome.io/components/api.html#configuration-variables and, of course warn the user that this is a possible security issue. Anyways - this is also done with many other projects, AND it would require that a possible hacker is already inside the internal (or mayby iot) (W)LAN - and at this point.... recommend to have a big warning, and that the user has to take care about e.g.:

• secure internal network
• split internal networks: IOT, Guest, Internal, Management, ...
• enable api-encryption

2. Support to sensor display precision from Home Assistant

Now the values shown in your panel will follow the sensor display precision provided by Home Assistant.

=> If you have problems with a value exceeding the available space in your panel, please reduce the number of decimals using Home Assistant sensor display precision.

3. Filtered device list

When selecting the NSPanel on the automation, only ESP32 devices will be shown, making easier to find your panel.

4. New language selector

Starts using the new language selector release with HA 2023.5.0 and based on RFC 5646, which will increase reliability and standardization of the code. Althougt this is not visible for users at the first view, it will enable the use of more granualar language selections (like pt-BR vs pt-PT or en-US vs en-UK) if needed in the future.

=> If you are an existing users, please remember to select your language again after the update, as the previous selection will be invalid.  

5. Removed settings_entity

The entity sensor.xxxxx_settings_entity was previously used by ESPHome to to transfer information about the selected entity on the settings page to the Blueprint, enabling the transfer of settings from different instances of the blueprint with the use of service esphome.xxxxx_set_settings_entity. This mechanism was a bit fragile and not user friendly. With this version the information about the entity shown will be part of the sensor.xxxxx_nspanel_event and the settings pages will be called with the service esphome.xxxxx_open_entity_settings_page. Apart of a cleaner device page, this change should be transparent for most users. If you have made automations based on the removed elements, please update it using the new service.  

6. Support for US model on landscape mode

If you are using a panel model US in landscape mode, you can now use nspanel_us_land.tft where the bars related to the hardware buttons will be located at the right, closer to the respective buttons and fixing the offset on the touch screen when using nspanel_eu.tft into a US panel.

=> The hardware buttons labels are hidden in this format, as Nextion cannot support rotated text.  

7. API status indication on the panel

Now the Wi-Fi icon in the panel (at the right side of the time) will show one of 3 possible states:

The panel is connected to the Wi-Fi and the API is connected to Home Assistant (mdi:wifi)

The panel is connected to the Wi-Fi, but the API is not connected to Home Assistant (mdi:api-off)

The panel is NOT connected to the Wi-Fi (mdi:wifi-off)  

8. Light & cover settings pages will show only the supported features

Now when long press a button conneted to a light or a cover, the detailed light settings page will open only when the entity supports advanced control, and the detailed page will only show the controls supported by that entity.  

9. New "Fan speed page"

If you have a connected fan supporting speed control, now you are able to control it's speed from your panel. Just add the new fan to one of the buttons pages or to the hardware buttons and a long press on those buttons will pop up the new "Fan speed page":  

10. Select wake-up page

Now you can select the wake-up page on the blueprint settings:

This selected page will be shown after a boot (after the boot page) and with a touch in the screen when on screen saver page. After showing this wake-up page, all the previous behavior for closing the page (with a click or after a timeout) will be the same.

 

11. Panel's local control

We are trying to make your panel as autonomous as possible by moving some of the controls from the Blueprint to ESPHome. This will reduce the load in your network and Home Assistant, but also will make a more reliable system capable to do it's core functionality even when the network is unavailable or Home Assistant is restarting. With this version, the following engines have been moved to your panel (local control):

• Time display
• Physical relay control (when hardware left button is connected to relay 1 or right button to relay 2)
• Embedded thermostat (see bellow)

 

12. Embedded thermostat/heater

Now you can use your panel to control a heater and let your ambient more confortable, and you will be able to control it locally even when your Wi-Fi is out or Home Assistant is unavailable.

in order to have this enable, add the following to your substitutions:

substitutions:
  embedded_thermostat_disabled: "false"
  embedded_thermostat_heater_relay: "1" # Select 1 for "Relay 1" or 2 for "Relay 2"

For more advanced settings, please take a look at the full documentation.

===>>> Add documentation before release <<<===

• How to enable
• Substitutions
• etc

 

Next topics we are currently working on

See here: https://github.com/Blackymas/NSPanel_HA_Blueprint/labels/roadmap

What's Changed

New Contributors