Files
NSPanel_HA_Blueprint/advanced/esphome/nspanel_esphome_addon_climate_base.yaml
Edward Firmo 98d3a9189c yamllint
2023-12-18 17:42:45 +01:00

152 lines
6.7 KiB
YAML

#####################################################################################################
##### NSPANEL ESPHOME created by Blackymas - https://github.com/Blackymas/NSPanel_HA_Blueprint #####
##### ESPHome Add-on for Climate control - Shared - This will be called by heat/cool #####
##### PLEASE only make changes if it is necessary and also the required knowledge is available. #####
##### For normal use with the Blueprint, no changes are necessary. #####
#####################################################################################################
##### ATTENTION: This will add climate elements to the core system and requires the core part. #####
#####################################################################################################
---
substitutions:
### Local thermostat defaults ###
# https://esphome.io/components/climate/thermostat.html
heater_relay: "0" # Select 1 for "Relay 1", 2 for "Relay 2" or "0" to a dummy switch/disabled
cooler_relay: "0" # Select 1 for "Relay 1", 2 for "Relay 2" or "0" to a dummy switch/disabled
min_off_time: "300"
min_run_time: "300"
min_idle_time: "30"
# https://esphome.io/components/climate/index.html#base-climate-configuration
temp_min: "5"
temp_max: "45"
temp_step: "0.5"
##### DO NOT CHANGE THIS #####
addon_climate_cool: "false"
addon_climate_heat: "false"
##############################
climate:
- platform: thermostat
name: ${device_name} Thermostat
id: thermostat_embedded
sensor: temp_nspanel
min_idle_time: ${min_idle_time}s
visual:
min_temperature: ${temp_min} ${temp_units}
max_temperature: ${temp_max} ${temp_units}
#temperature_step: ${temp_step} ${temp_units}
temperature_step:
target_temperature: 0.5 #This is hard coded for now as ESPHome isn't supporting a substitution here. In contact with support.
current_temperature: 0.1
idle_action:
- switch.turn_off: relay_${heater_relay}
default_preset: "Off"
on_boot_restore_from: memory
internal: false
on_state:
- logger.log: Climate state changed - Start
- script.execute:
id: page_climate
construct_page: false
- script.execute: addon_climate_update_page_home
- logger.log: Climate state changed - End
globals:
##### Is embedded thermostat visible on climate page? #####
- id: is_addon_climate_visible
type: bool
restore_value: false
initial_value: 'false'
##### Embeded climate friendly name #####
- id: addon_climate_friendly_name
type: std::string
restore_value: false
initial_value: '"${device_name} Thermostat"'
switch:
##### PHYSICAL SWITCH 0 (Dummy) - Used when relay is not set #####
- name: ${device_name} Relay 0 (dummy)
platform: template
id: relay_0
lambda: !lambda return false;
internal: true
optimistic: true
script:
- id: !extend addon_climate_update_page_home
mode: restart
then:
- lambda: |-
// Update home.climate_entity variable
detailed_entity->publish_state((id(is_embedded_thermostat)) ? "embedded_climate" : "");
disp1->set_component_value("climate.embedded", (id(is_embedded_thermostat)) ? 1 : 0);
// Update chips
if (id(is_embedded_thermostat))
id(update_climate_icon).execute("home.icon_top_03", int(thermostat_embedded->action), int(thermostat_embedded->mode));
- id: !extend addon_climate_service_call
then:
- lambda: |-
id(is_addon_climate_visible) = true;
disp1->set_component_value("climate.embedded", 1);
auto call = thermostat_embedded->make_call();
if (key == "set_temperature")
call.set_target_temperature(stof(value) / 10);
else if (key == "hvac_mode")
call.set_mode(value);
call.perform();
- id: !extend addon_climate_set_climate
then:
- lambda: |-
id(is_addon_climate_visible) = embedded_climate;
- id: !extend page_climate
then:
- lambda: |-
if (current_page->state == "climate" and id(is_addon_climate_visible))
{
disp1->set_component_text_printf("page_label", id(addon_climate_friendly_name).c_str());
float temp_step = ${temp_step};
float temp_offset = ${temp_min};
float temp_max = ${temp_max};
float total_steps = (temp_max-temp_offset)/temp_step;
set_climate->execute
(
thermostat_embedded->current_temperature, // current_temp
thermostat_embedded->target_temperature, // target_temp
int(round(${temp_step}*10)), // temp_step
int(round(total_steps)), // total_steps //int(round((10*thermostat_embedded->target_temperature-temp_offset)/temp_step)), // slider_val
int(round(${temp_min}*10)), // temp_offset
"", // climate_icon
true // embedded_climate
);
// Update target temp icon
update_climate_icon->execute("climate.target_icon", int(thermostat_embedded->action), int(thermostat_embedded->mode));
// Update buttons bar
// Hide not supported hotspots
disp1->hide_component("button01");
disp1->hide_component("button02");
if (${addon_climate_heat}) disp1->show_component("button03"); else disp1->hide_component("button03"); //Heat
if (${addon_climate_cool}) disp1->show_component("button04"); else disp1->hide_component("button04"); //Cool
disp1->hide_component("button05");
disp1->hide_component("button06");
disp1->show_component("button07"); //Off
// Set buttons colors
disp1->set_component_font_color("climate.button01", 6339);
disp1->set_component_font_color("climate.button02", 6339);
disp1->set_component_font_color("climate.button03", (thermostat_embedded->mode==climate::CLIMATE_MODE_HEAT) ? 64164 : ((${addon_climate_heat}) ? 48631 : 6339));
disp1->set_component_font_color("climate.button04", (thermostat_embedded->mode==climate::CLIMATE_MODE_COOL) ? 1055 : ((${addon_climate_cool}) ? 48631 : 6339));
disp1->set_component_font_color("climate.button05", 6339);
disp1->set_component_font_color("climate.button06", 6339);
disp1->set_component_font_color("climate.button07", (thermostat_embedded->mode==climate::CLIMATE_MODE_OFF) ? 10597 : 35921);
}
- id: !extend addon_climate_set_climate_friendly_name
then:
- lambda: |-
id(addon_climate_friendly_name) = friendly_name;