Add-on: Climate

Description

This add-on enables the use of your panel's relays to act as a thermostat (either cooler or heater) using the internal temperature sensor and independent of the network availability.

Attention

The NSPanel is limited to 2A per relay. Don't use it for directly power your cooler/heater if exceeding the panel specifications:
- 150W/110V/Gang, 300W/110V/Total
- 300W/220V/Gang, 600W/220V/Total
Note

More details on the Sonoff NSPanel's page and the product specifications document.
A target temperature must be set on the climate entity in Home Assistant or the page Climate in your panel.

Installation

You will need to add the reference to addon_climate_heat, addon_climate_cool or addon_climate_dual files on your ESPHome settings in the package section and after the remote_package (base code), as shown bellow (for heat in this example):

substitutions:
  # Settings - Editable values
  device_name: "YOUR_NSPANEL_NAME" 
  wifi_ssid: !secret wifi_ssid
  wifi_password: !secret wifi_password

  nextion_update_url: "http://homeassistant.local:8123/local/nspanel_us.tft"
    
  # Add-on configuration (if needed)
  ## Add-on climate
  heater_relay: "1"  # Possible values: "1" or "2"

# Customization area
##### My customization - Start #####
##### My customization - End #####

# Core and optional configurations
packages:
  remote_package:
    url: https://github.com/Blackymas/NSPanel_HA_Blueprint
    ref: main
    files:
      - nspanel_esphome.yaml # Core package
      # Optional advanced and add-on configurations
      # - advanced/esphome/nspanel_esphome_advanced.yaml
      # - nspanel_esphome_addon_climate_cool.yaml
      - nspanel_esphome_addon_climate_heat.yaml
      # - nspanel_esphome_addon_climate_dual.yaml
    refresh: 300s

esp32:
  framework:
    type: esp-idf

Configuration

The following keys are available to be used in your substitutions:

Key	Required	Supported values	Default	Description
cooler_relay	Mandatory for cool and dual	`1` or `2`	`0` (disabled)	Relay used for control the cooler. User `1` for "Relay 1" or `2` for "Relay 2".
heater_relay	Mandatory for heat and dual	`1` or `2`	`0` (disabled)	Relay used for control the heater. User `1` for "Relay 1" or `2` for "Relay 2".
temp_units	Optional	`°C` or `°F`	`°C`	Temperature unit.
min_off_time	Optional	Positive integer representing the number of seconds	`300`	Minimum duration (in seconds) the cooling/heating action must be disengaged before it may be engaged.
min_run_time	Optional	Positive integer representing the number of seconds	`300`	Minimum duration (in seconds) the cooling/heating action must be engaged before it may be disengaged.
min_idle_time	Optional	Positive integer representing the number of seconds	`30`	Minimum duration (in seconds) the idle action must be active before calling another climate action.
target_low	Optional	Number representing a temperature in the selected unit	`18`	The initial lower treshold for the target temperature.
target_high	Optional	Number representing a temperature in the selected unit	`24`	The initial higher treshold for the target temperature.
temp_min	Optional	Number representing a temperature in the selected unit	cool: `15` heat: `7` dual: `7`	The minimum temperature the climate device can reach. Used to set the range of the frontend gauge.
temp_max	Optional	Number representing a temperature in the selected unit	cool: `45` heat: `35` dual: `45`	The maximum temperature the climate device can reach. Used to set the range of the frontend gauge.
temp_step	Optional	Number representing a temperature in the selected unit	`0.5`	The granularity with which the target temperature can be controlled.

All values must be delimited with ""
For more details on the keys, please take a look at ESPHome Base Climate Configurations and ESPHome Climate Thermostat - Additional actions behavior.

Examples

Cooler

substitutions:
  # Settings - Editable values
  device_name: "YOUR_NSPANEL_NAME" 
  wifi_ssid: !secret wifi_ssid
  wifi_password: !secret wifi_password

  nextion_update_url: "http://homeassistant.local:8123/local/nspanel_us.tft"
    
  # Add-on configuration (if needed)
  ## Add-on climate
  cooler_relay: "1"  # Possible values: "1" or "2"
  temp_units: "°F"   # Temperatures in Fahrenheit
  temp_min: "40"     # Min supported temperature is 40°F
  temp_max: "80"     # Max supported temperature is 80°F
  temp_step: "1"     # Temperature granularity is 1°F

# Customization area
##### My customization - Start #####
##### My customization - End #####

# Core and optional configurations
packages:
  remote_package:
    url: https://github.com/Blackymas/NSPanel_HA_Blueprint
    ref: main
    files:
      - nspanel_esphome.yaml # Core package
      # Optional advanced and add-on configurations
      # - advanced/esphome/nspanel_esphome_advanced.yaml
      - nspanel_esphome_addon_climate_cool.yaml
      # - nspanel_esphome_addon_climate_heat.yaml
      # - nspanel_esphome_addon_climate_dual.yaml
    refresh: 300s

esp32:
  framework:
    type: esp-idf

Heater

substitutions:
  # Settings - Editable values
  device_name: "YOUR_NSPANEL_NAME" 
  wifi_ssid: !secret wifi_ssid
  wifi_password: !secret wifi_password

  nextion_update_url: "http://homeassistant.local:8123/local/nspanel_us.tft"
    
  # Add-on configuration (if needed)
  ## Add-on climate
  heater_relay: "1"     # Possible values: "1" or "2"
  temp_units: "°F"      # Temperatures in Fahrenheit
  temp_min: "40"        # Min supported temperature is 40°F
  temp_max: "80"        # Max supported temperature is 80°F
  temp_step: "1"        # Temperature granularity is 1°F
  cold_tolerance: "0.5" # lower set point
  hot_tolerance: "0.5"  # upper set point


# Customization area
##### My customization - Start #####
##### My customization - End #####

# Core and optional configurations
packages:
  remote_package:
    url: https://github.com/Blackymas/NSPanel_HA_Blueprint
    ref: main
    files:
      - nspanel_esphome.yaml # Core package
      # Optional advanced and add-on configurations
      # - advanced/esphome/nspanel_esphome_advanced.yaml
      # - nspanel_esphome_addon_climate_cool.yaml
      - nspanel_esphome_addon_climate_heat.yaml
      # - nspanel_esphome_addon_climate_dual.yaml
    refresh: 300s

esp32:
  framework:
    type: esp-idf

Dual

substitutions:
  # Settings - Editable values
  device_name: "YOUR_NSPANEL_NAME" 
  wifi_ssid: !secret wifi_ssid
  wifi_password: !secret wifi_password

  nextion_update_url: "http://homeassistant.local:8123/local/nspanel_us.tft"
    
  # Add-on configuration (if needed)
  ## Add-on climate
  heater_relay: "1"  # Possible values: "1" or "2"
  cooler_relay: "2"  # Possible values: "1" or "2"
  temp_units: "°F"   # Temperatures in Fahrenheit
  temp_min: "40"     # Min supported temperature is 40°F
  temp_max: "80"     # Max supported temperature is 80°F
  temp_step: "1"     # Temperature granularity is 1°F

# Customization area
##### My customization - Start #####
##### My customization - End #####

# Core and optional configurations
packages:
  remote_package:
    url: https://github.com/Blackymas/NSPanel_HA_Blueprint
    ref: main
    files:
      - nspanel_esphome.yaml # Core package
      # Optional advanced and add-on configurations
      # - advanced/esphome/nspanel_esphome_advanced.yaml
      # - nspanel_esphome_addon_climate_cool.yaml
      # - nspanel_esphome_addon_climate_heat.yaml
      - nspanel_esphome_addon_climate_dual.yaml
    refresh: 300s

esp32:
  framework:
    type: esp-idf

8.0 KiB Raw Blame History