h3n3/NSPanel_HA_Blueprint
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
main
NSPanel_HA_Blueprint/esphome/nspanel_esphome_addon_climate_base.yaml
Edward Firmo 7b406d85f1 Remove redundant info from climate dump config
2024-04-25 14:48:52 +02:00

248 lines
12 KiB
YAML
Raw Permalink Blame History

#####################################################################################################
##### NSPANEL ESPHOME created by Blackymas - https://github.com/Blackymas/NSPanel_HA_Blueprint #####
##### ESPHome Add-on for Climate control - Shared - This will be called by heat/cool #####
##### PLEASE only make changes if it is necessary and also the required knowledge is available. #####
##### For normal use with the Blueprint, no changes are necessary. #####
#####################################################################################################
##### ATTENTION: This will add climate elements to the core system and requires the core part. #####
#####################################################################################################
---
substitutions:
### Local thermostat defaults ###
# https://esphome.io/components/climate/thermostat.html
heater_relay: "0" # Select 1 for "Relay 1", 2 for "Relay 2" or "0" to a dummy switch/disabled
cooler_relay: "0" # Select 1 for "Relay 1", 2 for "Relay 2" or "0" to a dummy switch/disabled
min_off_time: "300"
min_run_time: "300"
min_idle_time: "30"
# https://esphome.io/components/climate/index.html#base-climate-configuration
temp_min: "7"
temp_max: "35"
temp_step: "0.5"
target_low: "18"
target_high: "24"
cool_deadband: "0.5" # Temperature delta before engaging cooling
cool_overrun: "0.5" # Temperature delta before disengaging cooling
heat_deadband: "0.5" # Temperature delta before engaging heat
heat_overrun: "0.5" # Temperature delta before disengaging heat
##### DO NOT CHANGE THIS #####
addon_climate_cool: "false"
addon_climate_heat: "false"
addon_climate_dual: "false"
##############################
esphome:
platformio_options:
build_flags:
- -D NSPANEL_HA_BLUEPRINT_ADDON_CLIMATE_BASE
climate:
- platform: thermostat
name: Thermostat
id: thermostat_embedded
sensor: temp_nspanel
min_idle_time: ${min_idle_time}s
visual:
min_temperature: ${temp_min} ${temp_units}
max_temperature: ${temp_max} ${temp_units}
temperature_step:
target_temperature: 0.5 # This is hard coded for now as ESPHome isn't supporting a substitution here. In contact with support.
current_temperature: 0.1
idle_action:
- switch.turn_off: relay_${heater_relay}
default_preset: "Off"
on_boot_restore_from: memory
internal: false
on_state:
- lambda: |-
page_climate->execute();
page_home->execute();
globals:
##### Is embedded thermostat visible on climate page? #####
- id: is_addon_climate_visible
type: bool
restore_value: false
initial_value: 'false'
##### Embeded climate friendly name #####
- id: addon_climate_friendly_name
type: std::string
restore_value: false
initial_value: '"${name} Thermostat"'
switch:
##### PHYSICAL SWITCH 0 (Dummy) - Used when relay is not set #####
- name: Relay 0 (dummy)
platform: template
id: relay_0
lambda: !lambda return false;
internal: true
optimistic: true
script:
- id: !extend change_climate_state
then:
- lambda: |-
if (embedded and !id(is_uploading_tft)) {
auto FahrenheitToCelsius = [](float fahrenheit) -> float {
return (fahrenheit - 32.0) * 5.0 / 9.0;
};
std::string temp_units = "${temp_units}";
bool temp_unit_fahrenheit = (temp_units == "°F" || temp_units == "F" || temp_units == "°f" || temp_units == "f");
auto call = thermostat_embedded->make_call();
float temperature;
id(is_addon_climate_visible) = true;
disp1->set_component_value("climate.embedded", 1);
if (key == "temperature") {
temperature = stof(value) / 10;
if (temp_unit_fahrenheit) temperature = FahrenheitToCelsius(temperature);
call.set_target_temperature(temperature);
} else if (key == "target_temp_high") {
temperature = stof(value) / 10;
if (temp_unit_fahrenheit) temperature = FahrenheitToCelsius(temperature);
call.set_target_temperature_high(temperature);
} else if (key == "target_temp_low") {
temperature = stof(value) / 10;
if (temp_unit_fahrenheit) temperature = FahrenheitToCelsius(temperature);
call.set_target_temperature_low(temperature);
} else if (key == "hvac_mode") {
call.set_mode(value);
}
call.perform();
}
- id: !extend dump_config
then:
- lambda: |-
// Check if more than one or none of the climate options are defined
#if defined(NSPANEL_HA_BLUEPRINT_ADDON_CLIMATE_COOL) && defined(NSPANEL_HA_BLUEPRINT_ADDON_CLIMATE_HEAT)
#error "Invalid settings for add-on Climate. More than one option selected: Cool + Heat."
#elif defined(NSPANEL_HA_BLUEPRINT_ADDON_CLIMATE_COOL) && defined(NSPANEL_HA_BLUEPRINT_ADDON_CLIMATE_DUAL)
#error "Invalid settings for add-on Climate. More than one option selected: Cool + Dual."
#elif defined(NSPANEL_HA_BLUEPRINT_ADDON_CLIMATE_HEAT) && defined(NSPANEL_HA_BLUEPRINT_ADDON_CLIMATE_DUAL)
#error "Invalid settings for add-on Climate. More than one option selected: Heat + Dual."
#elif !defined(NSPANEL_HA_BLUEPRINT_ADDON_CLIMATE_COOL) && !defined(NSPANEL_HA_BLUEPRINT_ADDON_CLIMATE_HEAT) && !defined(NSPANEL_HA_BLUEPRINT_ADDON_CLIMATE_DUAL)
#error "Invalid settings for add-on Climate. No option selected between Cool, Heat or Dual."
#endif
if (!id(is_uploading_tft)) {
static const char *const TAG = "nspanel_ha_blueprint";
const uint cooler_relay = ${cooler_relay};
const uint heater_relay = ${heater_relay};
ESP_LOGCONFIG(TAG, "Add-on climate:");
#ifdef NSPANEL_HA_BLUEPRINT_ADDON_CLIMATE_COOL
ESP_LOGCONFIG(TAG, " Cool: Enabled");
if (cooler_relay == 1 or cooler_relay == 2)
ESP_LOGCONFIG(TAG, " Relay: %u", cooler_relay);
else
ESP_LOGE(TAG, " Relay: %u", cooler_relay);
#endif
#ifdef NSPANEL_HA_BLUEPRINT_ADDON_CLIMATE_HEAT
ESP_LOGCONFIG(TAG, " Heat: Enabled");
if (heater_relay == 1 or heater_relay == 2)
ESP_LOGCONFIG(TAG, " Relay: %u", heater_relay);
else
ESP_LOGE(TAG, " Relay: %u", heater_relay);
#endif
#ifdef NSPANEL_HA_BLUEPRINT_ADDON_CLIMATE_DUAL
ESP_LOGCONFIG(TAG, " Dual: Enabled");
if (cooler_relay == 1 or cooler_relay == 2)
ESP_LOGCONFIG(TAG, " Relay (cooler): %u", cooler_relay);
else
ESP_LOGE(TAG, " Relay (cooler): %u", cooler_relay);
if (heater_relay == 1 or heater_relay == 2)
ESP_LOGCONFIG(TAG, " Relay (heater): %u", heater_relay);
else
ESP_LOGE(TAG, " Relay (heater): %u", heater_relay);
if (cooler_relay == heater_relay)
ESP_LOGE(TAG, " Double relay assignment");
#endif
}
- id: !extend init_hardware_climate
then:
- lambda: |-
id(addon_climate_friendly_name) = embedded_climate_friendly_name;
- id: !extend page_climate
then:
- lambda: |-
id(is_addon_climate_visible) = (current_page->state == "climate" and detailed_entity->state == "embedded_climate");
if (id(is_addon_climate_visible) and !id(is_uploading_tft)) {
auto CelsiusToFahrenheit = [](float celsius) -> float {
return (celsius * 9 / 5) + 32;
};
const std::string temp_units = "${temp_units}";
const bool temp_unit_fahrenheit = (temp_units == "°F" || temp_units == "F" || temp_units == "°f" || temp_units == "f");
ClimateTraits traits = thermostat_embedded->get_traits();
disp1->set_component_text("page_label", id(addon_climate_friendly_name).c_str());
float temp_step = traits.get_visual_target_temperature_step();
float temp_offset = traits.get_visual_min_temperature();
float temp_max = traits.get_visual_max_temperature();
float temp_target = thermostat_embedded->target_temperature;
float temp_target_high = thermostat_embedded->target_temperature_high;
float temp_target_low = thermostat_embedded->target_temperature_low;
float temp_current = thermostat_embedded->current_temperature;
if (temp_unit_fahrenheit) {
//temp_step = CelsiusToFahrenheit(temp_step);
temp_step = std::ceil(temp_step * 1.8);
temp_offset = CelsiusToFahrenheit(temp_offset);
temp_max = CelsiusToFahrenheit(temp_max);
temp_target = CelsiusToFahrenheit(temp_target);
temp_target_high = CelsiusToFahrenheit(temp_target_high);
temp_target_low = CelsiusToFahrenheit(temp_target_low);
temp_current = CelsiusToFahrenheit(temp_current);
}
float total_steps = (temp_max-temp_offset)/temp_step;
set_climate->execute
(
temp_current, // current_temp
0, // supported_features
((${addon_climate_dual}) ? -999 : temp_target), // target_temp
((${addon_climate_dual}) ? temp_target_high : -999), // target_temp_high
((${addon_climate_dual}) ? temp_target_low : -999), // target_temp_low
int(round(temp_step*10)), // temp_step
int(round(total_steps)), // total_steps
int(round(temp_offset*10)), // temp_offset
"", // climate_icon
true // embedded_climate
);
// Update target temp icon
update_climate_icon->execute("target_icon", int(thermostat_embedded->action), int(thermostat_embedded->mode));
// Update buttons bar
// Hide not supported hotspots
disp1->hide_component("button01");
if (${addon_climate_dual}) disp1->show_component("button02"); else disp1->hide_component("button02");
if (${addon_climate_heat} or ${addon_climate_dual}) disp1->show_component("button03"); else disp1->hide_component("button03"); //Heat
if (${addon_climate_cool} or ${addon_climate_dual}) disp1->show_component("button04"); else disp1->hide_component("button04"); //Cool
disp1->hide_component("button05");
disp1->hide_component("button06");
disp1->show_component("button07"); //Off
// Set buttons colors
disp1->set_component_font_color("button01", 6339);
disp1->set_component_font_color("button02", (thermostat_embedded->mode==climate::CLIMATE_MODE_HEAT_COOL) ? 65535 : ((${addon_climate_dual}) ? 48631 : 6339));
disp1->set_component_font_color("button03", (thermostat_embedded->mode==climate::CLIMATE_MODE_HEAT) ? 64164 : ((${addon_climate_heat} or ${addon_climate_dual}) ? 48631 : 6339));
disp1->set_component_font_color("button04", (thermostat_embedded->mode==climate::CLIMATE_MODE_COOL) ? 1055 : ((${addon_climate_cool} or ${addon_climate_dual}) ? 48631 : 6339));
disp1->set_component_font_color("button05", 6339);
disp1->set_component_font_color("button06", 6339);
disp1->set_component_font_color("button07", (thermostat_embedded->mode==climate::CLIMATE_MODE_OFF) ? 10597 : 35921);
}
- id: !extend page_home
then:
- lambda: |-
// Update chips
if (id(is_embedded_thermostat) and !id(is_uploading_tft))
update_climate_icon->execute("home.chip_climate", int(thermostat_embedded->action), int(thermostat_embedded->mode));
- id: !extend set_climate
then:
- lambda: |-
if (current_page->state == "climate" and !id(is_uploading_tft))
id(is_addon_climate_visible) = embedded_climate;
...
Reference in New Issue View Git Blame Copy Permalink