####################################################################################################
##### NSPanel ESPHome Add-on for Climate control                                               #####
##### Add-on for https://github.com/Blackymas/NSPanel_HA_Blueprint                             #####
####################################################################################################

substitutions:
  ### Local thermostat defaults ###
  # https://esphome.io/components/climate/thermostat.html
  addon_climate_temp_units: "°C"
  addon_climate_heater_relay: "0" # Select 1 for "Relay 1", 2 for "Relay 2" or "0" to a dummy switch/disabled
  addon_climate_min_heating_off_time: "300"
  addon_climate_min_heating_run_time: "300"
  addon_climate_min_idle_time: "30"
  # https://esphome.io/components/climate/index.html#base-climate-configuration
  addon_climate_visual_min_temperature: "5"
  addon_climate_visual_max_temperature: "25"
  addon_climate_visual_temperature_step: "0.5"

  ##### DON'T CHANGE THIS #####
  addon_climate: "true"
  #############################

climate:
  - platform: thermostat
    name: ${device_name} Thermostat
    id: thermostat_embedded
    sensor: temp_nspanel
    min_heating_off_time: ${addon_climate_min_heating_off_time}s
    min_heating_run_time: ${addon_climate_min_heating_run_time}s
    min_idle_time: ${addon_climate_min_idle_time}s
    visual:
      min_temperature: ${addon_climate_visual_min_temperature} ${addon_climate_temp_units}
      max_temperature: ${addon_climate_visual_max_temperature} ${addon_climate_temp_units}
      temperature_step: ${addon_climate_visual_temperature_step} ${addon_climate_temp_units}
      #  target_temperature: 0.5 #!lambda "return ${addon_climate_visual_target_temperature_step};"
      #  current_temperature: 0.1 #!lambda "return ${addon_climate_visual_current_temperature_step};"
    heat_action:
      - switch.turn_on: relay_${addon_climate_heater_relay}
    idle_action:
      - switch.turn_off: relay_${addon_climate_heater_relay}
    default_preset: "Off"
    on_boot_restore_from: memory
    preset:
      - name: "Off"
        default_target_temperature_low: ${addon_climate_visual_min_temperature} ${addon_climate_temp_units}
        mode: "off"
      - name: Home
        default_target_temperature_low: 21 ${addon_climate_temp_units}
    internal: false
    on_state:
      - logger.log: Climate state changed - Start
      - script.execute:
          id: addon_climate_update_page_climate
      - logger.log: Climate state changed - End

globals:
  ##### Is embedded thermostat set as main climate entity? #####
  - id: is_embedded_thermostat
    type: bool
    restore_value: true
    initial_value: 'false'
  ##### Is embedded thermostat visible on climate page? #####
  - id: is_addon_climate_visible
    type: bool
    restore_value: false
    initial_value: 'false'

script:
  - id: !extend addon_climate_update_page_home
    mode: restart
    then:
      - if:
          condition:
            - binary_sensor.is_on: nextion_init
          then:
            - lambda: |-
                // Update home.entity variable
                id(disp1).set_component_text_printf("home.entity", (id(is_embedded_thermostat)) ? "embedded_climate" : "");
                //if (id(is_embedded_thermostat)) id(disp1).set_component_text_printf("home.entity", "embedded_climate");
                //else id(disp1).set_component_text_printf("home.entity", "");

            - if:
                condition:
                  - lambda: !lambda 'return id(is_embedded_thermostat);'
                then:
                  - lambda: |-
                      // Update chips
                      if (${verbose_log}) ESP_LOGD("script.refresh_chips_climate", "thermostat_embedded.action=%i", int(id(thermostat_embedded).action));
                      switch (int(id(thermostat_embedded).action)) // CLIMATE_ACTION_OFF = 0, CLIMATE_ACTION_COOLING = 2, CLIMATE_ACTION_HEATING = 3, CLIMATE_ACTION_IDLE = 4, CLIMATE_ACTION_DRYING = 5, CLIMATE_ACTION_FAN = 6
                      {
                        case 0: //CLIMATE_ACTION_OFF
                          if (${verbose_log}) ESP_LOGD("script.refresh_chips_climate", "thermostat_embedded.mode=%i", int(id(thermostat_embedded).mode));
                          switch (int(id(thermostat_embedded).mode)) // CLIMATE_MODE_OFF = 0, CLIMATE_MODE_HEAT_COOL = 1, CLIMATE_MODE_COOL = 2, CLIMATE_MODE_HEAT = 3, CLIMATE_MODE_FAN_ONLY = 4, CLIMATE_MODE_DRY = 5, CLIMATE_MODE_AUTO = 6
                          {
                            case 0: //CLIMATE_MODE_OFF
                              id(disp1).set_component_text_printf("home.icon_top_03", "%s", "\uFFFF"); // (E424) Don't show icon when off
                              id(disp1).set_component_font_color("home.icon_top_03", 35921);
                              break;
                            case 1: //CLIMATE_MODE_HEAT_COOL
                              id(disp1).set_component_text_printf("home.icon_top_03", "%s", "\uE069");
                              id(disp1).set_component_font_color("home.icon_top_03", 35921);
                              break;
                            case 2: //CLIMATE_MODE_COOL
                              id(disp1).set_component_text_printf("home.icon_top_03", "%s", "\uE716");
                              id(disp1).set_component_font_color("home.icon_top_03", 35921);
                              break;
                            case 3: //CLIMATE_MODE_HEAT
                              id(disp1).set_component_text_printf("home.icon_top_03", "%s", "\uE237");
                              id(disp1).set_component_font_color("home.icon_top_03", 64164);
                              break;
                            case 4: //CLIMATE_MODE_FAN_ONLY
                              id(disp1).set_component_text_printf("home.icon_top_03", "%s", "\uE20F");
                              id(disp1).set_component_font_color("home.icon_top_03", 35921);
                              break;
                            case 5: //CLIMATE_MODE_DRY
                              id(disp1).set_component_text_printf("home.icon_top_03", "%s", "\uE58D");
                              id(disp1).set_component_font_color("home.icon_top_03", 35921);
                              break;
                            case 6: //CLIMATE_MODE_AUTO
                              id(disp1).set_component_text_printf("home.icon_top_03", "%s", "\uEE8D");
                              id(disp1).set_component_font_color("home.icon_top_03", 35921);
                              break;
                          }
                        case 2: //CLIMATE_ACTION_COOLING
                          id(disp1).set_component_text_printf("home.icon_top_03", "%s", "\uE716");
                          id(disp1).set_component_font_color("home.icon_top_03", 1055);
                          break;
                        case 3: //CLIMATE_ACTION_HEATING
                          id(disp1).set_component_text_printf("home.icon_top_03", "%s", "\uE237");
                          id(disp1).set_component_font_color("home.icon_top_03", 64164);
                          break;
                        case 4: //CLIMATE_ACTION_IDLE
                          id(disp1).set_component_text_printf("home.icon_top_03", "%s", "\uE50E"); // mdi:thermometer
                          id(disp1).set_component_font_color("home.icon_top_03", 35921);
                          break;
                        case 5: //CLIMATE_ACTION_DRYING
                          id(disp1).set_component_text_printf("home.icon_top_03", "%s", "\uE58D");
                          id(disp1).set_component_font_color("home.icon_top_03", 64704);
                          break;
                        case 6: //CLIMATE_ACTION_FAN
                          id(disp1).set_component_text_printf("home.icon_top_03", "%s", "\uE20F");
                          id(disp1).set_component_font_color("home.icon_top_03", 1530);
                          break;
                      }

  - id: !extend addon_climate_service_call
    #mode: restart
    #parameters:
    #  key: string
    #  value: string
    then:
      - lambda: |-
          id(is_addon_climate_visible) = true;
          auto call = id(thermostat_embedded).make_call();
          if (key == "set_temperature")
            {
              call.set_target_temperature(stof(value) / 10);
            }
          else if (key == "hvac_mode")
            {
              call.set_mode(value);
            }
          call.perform();

  - id: !extend addon_climate_set_climate
    then:
      - lambda: id(is_addon_climate_visible) = embedded_climate;

  - id: !extend addon_climate_global_settings
    then:
      - lambda: id(is_embedded_thermostat) = embedded_climate;

  - id: !extend addon_climate_update_page_climate
    then:
      - if:
          condition:
            - binary_sensor.is_on: nextion_init
            - text_sensor.state: # Is climate page visible?
                id: current_page
                state: 'climate'
            - lambda: !lambda return id(is_addon_climate_visible);
          then: # Embedded thermostat is visible
            # Update slider, current temperature & target temperature
            - script.execute:
                id: set_climate
                current_temp: !lambda "return id(thermostat_embedded).current_temperature;"
                target_temp: !lambda "return id(thermostat_embedded).target_temperature;"
                temp_step: !lambda "return int(round(${addon_climate_visual_temperature_step}*10));"
                total_steps: !lambda |-
                  float temp_step = ${addon_climate_visual_temperature_step};
                  float temp_offset = ${addon_climate_visual_min_temperature};
                  float temp_max = ${addon_climate_visual_max_temperature};
                  float total_steps = (temp_max-temp_offset)/temp_step;
                  return int(round(total_steps));
                slider_val: !lambda |-
                  float temp_step = ${addon_climate_visual_temperature_step};
                  float temp_offset = ${addon_climate_visual_min_temperature};
                  return int(round((10*id(thermostat_embedded).target_temperature-temp_offset)/temp_step));
                temp_offset: !lambda "return int(round(${addon_climate_visual_min_temperature}*10));"
                climate_icon: ""
                embedded_climate: True

            # Update target temp icon
            - lambda: |-
                if (${verbose_log}) ESP_LOGD("script.addon_climate_update_page_climate", "thermostat_embedded.action=%i", int(id(thermostat_embedded).action));
                switch (int(id(thermostat_embedded).action)) // CLIMATE_ACTION_OFF = 0, CLIMATE_ACTION_COOLING = 2, CLIMATE_ACTION_HEATING = 3, CLIMATE_ACTION_IDLE = 4, CLIMATE_ACTION_DRYING = 5, CLIMATE_ACTION_FAN = 6
                {
                  case 0: //CLIMATE_ACTION_OFF
                    if (${verbose_log}) ESP_LOGD("script.addon_climate_update_page_climate", "thermostat_embedded.mode=%i", int(id(thermostat_embedded).mode));
                    switch (int(id(thermostat_embedded).mode)) // CLIMATE_MODE_OFF = 0, CLIMATE_MODE_HEAT_COOL = 1, CLIMATE_MODE_COOL = 2, CLIMATE_MODE_HEAT = 3, CLIMATE_MODE_FAN_ONLY = 4, CLIMATE_MODE_DRY = 5, CLIMATE_MODE_AUTO = 6
                    {
                      case 0: //CLIMATE_MODE_OFF
                        id(disp1).set_component_text_printf("climate.target_icon", "%s", "\uFFFF"); // (E424) Don't show icon when off
                        id(disp1).set_component_font_color("climate.target_icon", 35921);
                        break;
                      case 1: //CLIMATE_MODE_HEAT_COOL
                        id(disp1).set_component_text_printf("climate.target_icon", "%s", "\uE069");
                        id(disp1).set_component_font_color("climate.target_icon", 35921);
                        break;
                      case 2: //CLIMATE_MODE_COOL
                        id(disp1).set_component_text_printf("climate.target_icon", "%s", "\uE716");
                        id(disp1).set_component_font_color("climate.target_icon", 1055);
                        break;
                      case 3: //CLIMATE_MODE_HEAT
                        id(disp1).set_component_text_printf("climate.target_icon", "%s", "\uE237");
                        id(disp1).set_component_font_color("climate.target_icon", 64164);
                        break;
                      case 4: //CLIMATE_MODE_FAN_ONLY
                        id(disp1).set_component_text_printf("climate.target_icon", "%s", "\uE20F");
                        id(disp1).set_component_font_color("climate.target_icon", 35921);
                        break;
                      case 5: //CLIMATE_MODE_DRY
                        id(disp1).set_component_text_printf("climate.target_icon", "%s", "\uE58D");
                        id(disp1).set_component_font_color("climate.target_icon", 64704);
                        break;
                      case 6: //CLIMATE_MODE_AUTO
                        id(disp1).set_component_text_printf("climate.target_icon", "%s", "\uEE8D");
                        id(disp1).set_component_font_color("climate.target_icon", 35921);
                        break;
                    }
                  case 2: //CLIMATE_ACTION_COOLING
                    id(disp1).set_component_text_printf("climate.target_icon", "%s", "\uE716");
                    id(disp1).set_component_font_color("climate.target_icon", 1055);
                    break;
                  case 3: //CLIMATE_ACTION_HEATING
                    id(disp1).set_component_text_printf("climate.target_icon", "%s", "\uE237");
                    id(disp1).set_component_font_color("climate.target_icon", 64164);
                    break;
                  case 4: //CLIMATE_ACTION_IDLE
                    id(disp1).set_component_text_printf("climate.target_icon", "%s", "\uE50E"); // mdi:thermometer
                    id(disp1).set_component_font_color("climate.target_icon", 35921);
                    break;
                  case 5: //CLIMATE_ACTION_DRYING
                    id(disp1).set_component_text_printf("climate.target_icon", "%s", "\uE58D");
                    id(disp1).set_component_font_color("climate.target_icon", 64704);
                    break;
                  case 6: //CLIMATE_ACTION_FAN
                    id(disp1).set_component_text_printf("climate.target_icon", "%s", "\uE20F");
                    id(disp1).set_component_font_color("climate.target_icon", 1530);
                    break;
                }

            # Update buttons bar
            - lambda: |-
                if (${verbose_log}) ESP_LOGD("script.addon_climate_update_page_climate", "Updating buttons bar");
                // Hide not supported hotspots
                id(disp1).hide_component("climate.button01");
                id(disp1).hide_component("climate.button02");
                id(disp1).show_component("climate.button03"); //Heat
                id(disp1).hide_component("climate.button04");
                id(disp1).hide_component("climate.button05");
                id(disp1).hide_component("climate.button06");
                id(disp1).show_component("climate.button07"); //Off
                // Set buttons colors
                id(disp1).set_component_font_color("climate.button01_icon", 10597);
                id(disp1).set_component_font_color("climate.button02_icon", 10597);
                id(disp1).set_component_font_color("climate.button03_icon", (id(thermostat_embedded).mode==climate::CLIMATE_MODE_HEAT) ? 64164 : 48631);
                id(disp1).set_component_font_color("climate.button04_icon", 10597);
                id(disp1).set_component_font_color("climate.button05_icon", 10597);
                id(disp1).set_component_font_color("climate.button06_icon", 10597);
                id(disp1).set_component_font_color("climate.button07_icon", (id(thermostat_embedded).mode==climate::CLIMATE_MODE_OFF) ? 35921 : 48631);

switch:
  ##### PHYSICAL SWITCH 0 (Dummy) - Used when relay is not set #####
  - name: ${device_name} Relay 0 (dummy)
    platform: template
    id: relay_0
    lambda: !lambda return false;
    internal: true
    optimistic: true