#####################################################################################################
##### NSPANEL ESPHOME created by Blackymas - https://github.com/Blackymas/NSPanel_HA_Blueprint  #####
##### ADVANCED CONFIG + FULL ESPHOME CODE!                                                      #####
##### PLEASE only make changes if it is necessary and also the required knowledge is available. #####
##### For normal use with the Blueprint, no changes are necessary.                              #####
#####################################################################################################

substitutions:

  ##### DON'T CHANGE THIS #####
  version: "4.0"
  #############################

##### WIFI SETUP #####
wifi:
  networks:
    - id: wifi_default
      ssid: ${wifi_ssid}
      password: ${wifi_password}
  power_save_mode: none
  ap:
    ssid: "${device_name}"
    password: ${wifi_password}

##### ESPHOME CONFIGURATION #####
esphome:
  name: ${device_name}
  min_version: 2023.5.0

##### TYPE OF ESP BOARD #####
esp32:
  board: esp32dev

captive_portal:

web_server:
  id: web_server_std
  port: 80
  auth:
    username: admin
    password: ${wifi_password}

##### OTA PASSWORD #####
ota:
  id: ota_std
  password: ${wifi_password}
  safe_mode: true
  reboot_timeout: 3min
  num_attempts: 3

##### LOGGER #####
logger:
  id: logger_std

##### ENABLE RINGTONE MUSIC SUPPORT #####
rtttl:
  id: buzzer
  output: buzzer_out

##### CONFIGURE INTERNAL BUZZER #####
output:
  ##### BUZZER FOR PLAYING RINGTONES #####
  - platform: ledc
    id: buzzer_out
    pin:
      number: 21

##### UART FOR NEXTION DISPLAY #####
uart:
  id: tf_uart
  tx_pin: 16
  rx_pin: 17
  baud_rate: 115200

##### Keeps time display updated #####
time:
  - id: time_provider
    platform: homeassistant
    on_time:
      - seconds: 0
        then:
          - script.execute:
              id: refresh_datetime
    on_time_sync:
      then:
        - component.update: api_timestamp
        - component.update: device_timestamp
        - logger.log: "System clock synchronized"
        - script.execute:
            id: refresh_datetime

##### START - BUTTON CONFIGURATION #####
button:
  ###### REBOOT BUTTON #####
  - name: ${device_name} Restart
    platform: restart
    id: restart_nspanel

  ##### UPDATE TFT DISPLAY #####
  - name: ${device_name} Update TFT display
    platform: template
    icon: mdi:file-sync
    id: tft_update
    entity_category: config
    on_press:
      - logger.log: "Button pressed: Update TFT display"
      - binary_sensor.template.publish:
          id: nextion_init
          state: false
      - delay: 16ms
      - lambda: id(disp1).upload_tft();

  ##### EXIT REPARSE TFT DISPLAY #####
  - name: ${device_name} Exit reparse
    platform: template
    icon: mdi:file-sync
    id: tft_reparse_off
    entity_category: config
    on_press:
      - logger.log: "Button pressed: Exit reparse"
      - uart.write:
          id: tf_uart
          data: "DRAKJHSUYDGBNCJHGJKSHBDN"
      - uart.write:
          id: tf_uart
          data: [0xFF, 0xFF, 0xFF]

##### START - API CONFIGURATION #####
api:
  id: api_server
  reboot_timeout: 0s

  services:

    ##### SERVICE TO UPDATE THE HMI FILE ##############
    - service: upload_tft
      then:
        - logger.log: "Service: upload_tft"
        - binary_sensor.template.publish:
            id: nextion_init
            state: false
        - lambda: 'id(disp1)->upload_tft();'

    ##### SERVICE TO UPDATE THE TFT FILE from URL #####
    - service: upload_tft_url
      variables:
        url: string
      then:
        - logger.log: "Service: upload_tft_url"
        - binary_sensor.template.publish:
            id: nextion_init
            state: false
        - lambda: 'id(disp1)->set_tft_url(url.c_str());'
        - lambda: 'id(disp1)->upload_tft();'

    ##### Service to send a command "printf" directly to the display #####
    - service: send_command_printf
      variables:
        cmd: string
      then:
        - lambda: 'id(disp1).send_command_printf("%s", cmd.c_str());'

    ##### Service to send a command "text_printf" directly to the display #####
    - service: send_command_text_printf
      variables:
        component: string
        message: string
      then:
        - lambda: 'id(disp1).set_component_text_printf(component.c_str(), "%s", message.c_str());'

    ##### Service to send a command "component_value (Dualstate Button)" directly to the display #####
    - service: send_command_value
      variables:
        component: string
        message: int
      then:
        - lambda: 'id(disp1).set_component_value(component.c_str(), message);'

    ##### Service to send a command "hide componente" directly to the display #####
    - service: send_command_hide ### unused ###
      variables:
        component: string
      then:
        - lambda: 'id(disp1).hide_component(component.c_str());'

    ##### Service to send a command "show componente" directly to the display #####
    - service: send_command_show ### unused ###
      variables:
        component: string
      then:
        - lambda: 'id(disp1).show_component(component.c_str());'

    ##### Service to send a command "show ALL componente" directly to the display #####
    - service: send_command_show_all ### unused ###
      then:
        - lambda: id(disp1).show_component("255");

    ##### Service to send a command "font color" directly to the display #####
    - service: set_component_color
      variables:
        component: string
        foreground: int[]
        background: int[]
      then:
        - lambda: id(set_component_color).execute(component, foreground, background);

    ##### Service to show a notification-message on the screen #####
    - service: notification_show
      variables:
        label: string
        text: string
      then:
        - lambda: |-
            ESP_LOGV("service.notification_show", "Starting");
            ESP_LOGV("service.notification_show", "label: %s", label.c_str());
            ESP_LOGV("service.notification_show", "text: %s", text.c_str());
            ESP_LOGV("service.notification_show", "text length: %i", text.length());

            id(disp1).send_command_printf("is_notification=1");
            id(disp1).send_command_printf("page notification");
            id(disp1).set_component_text_printf("notification.notifi_label", "%s", label.c_str());

            id(display_wrapped_text).execute("notification.notifi_text01", text.c_str(), id(display_mode) == 2 ? 23 : 32);

            id(notification_label).publish_state(label.c_str());
            id(notification_text).publish_state(text.c_str());
        - switch.turn_on: notification_unread
        - if:
            condition:
              - switch.is_on: notification_sound
            then:
              - rtttl.play: "two short:d=4,o=5,b=100:16e6,16e6"

    ##### Service to clear the notification #####
    - service: notification_clear
      then:
        - logger.log: "Service: notification_clear"
        - &notification_clear
          lambda: |-
            id(disp1).send_command_printf("is_notification=0");
            id(notification_label).publish_state("");
            id(notification_text).publish_state("");
        - switch.turn_off: notification_unread

    ##### Service to open information for settings-page(s)
    - service: open_entity_settings_page
      variables:
        page: string
        page_label: string
        page_icon: string
        page_icon_color: int[]
        entity: string
        back_page: string
      then:
        - lambda: |-
            ESP_LOGV("api.service.open_entity_settings_page", "Starting");
            ESP_LOGV("api.service.open_entity_settings_page", "page: %s", page.c_str());
            ESP_LOGV("api.service.open_entity_settings_page", "page_label: %s", page_label.c_str());
            ESP_LOGV("api.service.open_entity_settings_page", "page_icon: %s", page_icon.c_str());
            ESP_LOGV("api.service.open_entity_settings_page", "page_icon_color: %i, %i, %i", page_icon_color[0], page_icon_color[1], page_icon_color[2] );
            ESP_LOGV("api.service.open_entity_settings_page", "entity: %s", entity.c_str());
            ESP_LOGV("api.service.open_entity_settings_page", "back_page: %s", back_page.c_str());
            std::string cmp_entity = page.c_str() + std::string(".entity");
            ESP_LOGV("api.service.open_entity_settings_page", "cmp_entity: %s", cmp_entity.c_str());
            id(disp1).set_component_text_printf(cmp_entity.c_str(), "%s", entity.c_str());
            std::string cmd_page = std::string("page ") + page.c_str();
            id(disp1).send_command_printf(cmd_page.c_str());
            id(disp1).set_component_text_printf("page_label", "%s", page_label.c_str());
            id(disp1).set_component_text_printf("back_page", "%s", back_page.c_str());
            if ((page_icon.c_str() != std::string()) and (page_icon.c_str() != "") and (page != "climate"))
              {
                id(disp1).set_component_text_printf("icon_state", "%s", page_icon.c_str());
              }
            if (page != "climate")
              {
                id(set_component_color).execute("icon_state", page_icon_color, {});
                //id(disp1).set_component_font_color("icon_state", page_icon_color);
              }
            if (page == "climate" and entity == "embedded_climate") id(addon_climate_set_climate_friendly_name).execute(page_label.c_str());
            ESP_LOGV("api.service.open_entity_settings_page", "Finished");

    ##### Service to play a rtttl tones #####
    # Example tones : https://codebender.cc/sketch:109888#RTTTL%20Songs.ino
    - service: play_rtttl
      variables:
        song_str: string
      then:
        - rtttl.play:
            rtttl: !lambda 'return song_str;'

    # Service to show a QR code on the display (ex. for WiFi password)
    - service: qrcode
      variables:
        title: string
        qrcode: string
        show: bool
      then:
        - lambda: |-
            id(disp1).set_component_text_printf("qrcode.qrcode_label", "%s", title.c_str());
            id(disp1).set_component_text_printf("qrcode.qrcode_value", "%s", qrcode.c_str());
            if (show) id(disp1).send_command_printf("page qrcode");

    #### Service to set climate state ####
    - service: set_climate
      variables:
        current_temp: float
        target_temp: float
        temp_step: int
        total_steps: int
        temp_offset: int
        climate_icon: string
        embedded_climate: bool
      then:
        - lambda: |-
            ESP_LOGV("api.service.set_climate", "climateslider.maxval=%i", total_steps);
            ESP_LOGV("api.service.set_climate", "temp_offset=%f", temp_offset);
            ESP_LOGV("api.service.set_climate", "temp_step=%f", temp_step);
            ESP_LOGV("api.service.set_climate", "current_temp=%f", current_temp);
            ESP_LOGV("api.service.set_climate", "target_temp=%f", target_temp);
            ESP_LOGV("api.service.set_climate", "target_icon=%s", climate_icon.c_str());
            ESP_LOGV("api.service.set_climate", "embedded=%i", (embedded_climate) ? 1 : 0);

        - script.execute:
            id: set_climate
            current_temp: !lambda "return current_temp;"
            target_temp: !lambda "return target_temp;"
            temp_step: !lambda "return temp_step;"
            total_steps: !lambda "return total_steps;"
            temp_offset: !lambda "return temp_offset;"
            climate_icon: !lambda "return climate_icon;"
            embedded_climate: !lambda "return embedded_climate;"

  #### Service to set the buttons ####
    - service: set_button
      variables:
        btn_id: string
        btn_pic: int
        btn_bg: int[]
        btn_icon_font: int[]
        btn_txt_font: int[]
        btn_bri_font: int[]
        btn_icon: string
        btn_label: string
        btn_bri_txt: string
        btn_confirm: bool
        #entity: string
      then:
        - lambda: |-
            // ESP_LOGV("nextion", "set button %s", btn_id.c_str());
            std::string btnicon = btn_id.c_str() + std::string("icon");
            std::string btntext = btn_id.c_str() + std::string("text");
            std::string btnbri = btn_id.c_str() + std::string("bri");
            std::string btnconf = btn_id.c_str() + std::string("conf");
            //std::string btnentity = btn_id.c_str() + std::string("entity");
            id(disp1).send_command_printf("%spic.pic=%i", btn_id.c_str(), btn_pic);
            id(set_component_color).execute(btnicon.c_str(), btn_icon_font, btn_bg);
            id(set_component_color).execute(btntext.c_str(), btn_txt_font, btn_bg);
            id(set_component_color).execute(btnbri.c_str(), btn_bri_font, btn_bg);
            id(disp1).set_component_text_printf(btnicon.c_str(), "%s", btn_icon.c_str());
            id(display_wrapped_text).execute(btntext.c_str(), btn_label.c_str(), 10);
            if (strcmp(btn_bri_txt.c_str(), "0") != 0)
              id(disp1).set_component_text_printf(btnbri.c_str(), "%s", btn_bri_txt.c_str());
            else
              id(disp1).set_component_text_printf(btnbri.c_str(), " ");
            id(disp1).set_component_value(btnconf.c_str(), (btn_confirm) ? 1 : 0);
            //id(disp1).set_component_text_printf(btnentity.c_str(), "%s", entity.c_str());

    ##### SERVICE TO WAKE UP THE DISPLAY #####
    - service: wake_up
      variables:
        reset_timer: bool
      then:
        - lambda: |-
            if (id(current_page).state == "home")
              {
                id(disp1).send_command_printf("home.dimtimer.en=1");
                id(disp1).send_command_printf("home.sleeptimer.en=1");
              }
            else if (id(current_page).state == "screensaver") id(disp1).send_command_printf("page %s", id(wakeup_page_name).state.c_str());
            id(disp1).send_command_printf("dim=brightness");
            if (reset_timer) id(page_timer)->execute();

    #### Service to set the entities ####
    - service: set_entity
      variables:
        ent_id: string
        ent_icon: string
        ent_label: string
        ent_value: string
        ent_value_xcen: string
      then:
        - lambda: |-
            ESP_LOGV("service.set_entity", "entity: %s", ent_id.c_str());
            std::string enticon = ent_id.c_str() + std::string("_pic");
            std::string entlabel = ent_id.c_str() + std::string("_label");
            std::string entxcen = ent_id.c_str() + std::string(".xcen=") + ent_value_xcen.c_str();
            id(disp1).set_component_text_printf(enticon.c_str(), "%s", ent_icon.c_str());
            if (strcmp(ent_icon.c_str(), "0") != 0) id(disp1).set_component_text_printf(enticon.c_str(), "%s", ent_icon.c_str());
            id(disp1).set_component_text_printf(entlabel.c_str(), "%s", ent_label.c_str());
            //id(display_wrapped_text).execute(entlabel.c_str(), ent_label.c_str(), id(display_mode) == 2 ? 16 : 20);
            id(disp1).set_component_text_printf(ent_id.c_str(), "%s", ent_value.c_str());
            if (strcmp(ent_value_xcen.c_str(), "0") != 0) id(disp1).send_command_printf("%s", entxcen.c_str());

    ##### Service for transferring global settings from the blueprint to ESPHome #####
    - service: global_settings
      variables:
        blueprint_version: string
        relay1_local_control: bool
        relay1_icon: string
        relay1_icon_color: int
        relay2_local_control: bool
        relay2_icon: string
        relay2_icon_color: int
        date_color: int
        time_format: string
        time_color: int
        embedded_climate: bool
        embedded_indoor_temperature: bool
        temperature_unit_is_fahrenheit: bool
        mui_please_confirm: string
      then:
        - lambda: |-
            // Logs - Begin
            ESP_LOGV("service.global_settings", "Starting");
            ESP_LOGD("service.global_settings", "Blueprint version: %s", blueprint_version.c_str());
            ESP_LOGV("service.global_settings", "relay1_local_control: %i", (relay1_local_control) ? 1 : 0);
            ESP_LOGV("service.global_settings", "relay1_icon: %s", relay1_icon.c_str());
            ESP_LOGV("service.global_settings", "relay1_icon_color: %i", relay1_icon_color);
            ESP_LOGV("service.global_settings", "relay2_local_control: %i", (relay2_local_control) ? 1 : 0);
            ESP_LOGV("service.global_settings", "relay2_icon: %s", relay2_icon.c_str());
            ESP_LOGV("service.global_settings", "relay2_icon_color: %i", relay2_icon_color);
            ESP_LOGV("service.global_settings", "date_color: %i", date_color);
            ESP_LOGV("service.global_settings", "time_format: %s", time_format.c_str());
            ESP_LOGV("service.global_settings", "time_color: %i", time_color);
            ESP_LOGV("service.global_settings", "embedded_climate: %i", (embedded_climate) ? 1 : 0);
            ESP_LOGV("service.global_settings", "embedded_indoor_temperature: %i", (embedded_indoor_temperature) ? 1 : 0);
            ESP_LOGV("service.global_settings", "temperature_unit_is_fahrenheit: %i", (temperature_unit_is_fahrenheit) ? 1 : 0);
            ESP_LOGV("service.global_settings", "mui_please_confirm: %s", mui_please_confirm.c_str());

            // Blueprint version
            id(version_blueprint) = blueprint_version;
            id(check_versions).execute();

            // Relays
            id(relay1_local).publish_state(relay1_local_control);
            id(relay2_local).publish_state(relay2_local_control);
            id(home_relay1_icon) = relay1_icon.c_str();
            id(home_relay2_icon) = relay2_icon.c_str();
            id(home_relay1_icon_color) = relay1_icon_color;
            id(home_relay2_icon_color) = relay2_icon_color;

            // Localization
            id(mui_time_format) = time_format;

            // Date/Time colors
            id(home_date_color) = date_color;
            id(home_time_color) = time_color;

            // Embedded thermostat
            id(is_embedded_thermostat) = embedded_climate;

            // Indoor temperature
            id(embedded_indoor_temp) = embedded_indoor_temperature;
            id(temp_unit_fahrenheit) = temperature_unit_is_fahrenheit;
            id(display_embedded_temp)->execute();

            // Confirm page
            ESP_LOGV("service.global_settings", "Confirm page - Start");
            id(display_wrapped_text).execute("confirm.title", mui_please_confirm.c_str(), 15);

            // Refresh colors of global components
            ESP_LOGV("service.global_settings", "Refresh colors of global components");
            id(disp1).set_component_font_color("home.date", id(home_date_color));
            id(disp1).set_component_font_color("home.time", id(home_time_color));
            id(disp1).set_component_font_color("home.icon_top_01", id(home_relay1_icon_color));
            id(disp1).set_component_font_color("home.icon_top_02", id(home_relay2_icon_color));

            // Update home page
            ESP_LOGV("service.global_settings", "Update home page");
            id(update_page_home).execute();

        - if:
            condition:
              - text_sensor.state: # Is boot page visible?
                  id: current_page
                  state: 'boot'
            then:
              - lambda: |-
                  ESP_LOGV("service.global_settings", "Boot page is visible");
                  id(disp1).set_component_text_printf("boot.bluep_version", "%s", blueprint_version.c_str());
                  ESP_LOGV("service.global_settings", "Wait a bit");
              - wait_until:
                  condition:
                    - not:
                      - text_sensor.state: # Is boot page visible?
                          id: current_page
                          state: 'boot'
                  timeout: 2s
              - if:
                  condition:
                    - text_sensor.state: # Avoid this being called twice by multiple boot triggers
                        id: current_page
                        state: 'boot'
                  then:
                    - if:
                        condition:
                          switch.is_on: notification_sound
                        then:
                          - lambda: ESP_LOGV("service.global_settings", "Play boot sound");
                          - rtttl.play:
                              rtttl: 'two short:d=4,o=5,b=100:16e6,16e6'
                    - lambda: |-
                        ESP_LOGV("service.global_settings", "Jump to wake-up page: %s", id(wakeup_page_name).state.c_str());
                        id(disp1).send_command_printf("page %s", id(wakeup_page_name).state.c_str());

        - lambda: ESP_LOGV("service.global_settings", "Finished");

    #### Service to populate the page Home #####
    - service: page_home
      variables:
        notification_icon: string
        notification_icon_color_normal: int[]
        notification_icon_color_unread: int[]
        qrcode: bool
        qrcode_icon: string
        qrcode_icon_color: int[]
        entities_pages: bool
        entities_pages_icon: string
        entities_pages_icon_color: int[]
        alarm_state: string
      then:
        - lambda: |-
            // Logs - Begin
            ESP_LOGV("service.page_home_settings", "Starting");
            ESP_LOGV("service.page_home_settings", "notification_icon: %s", notification_icon.c_str());
            ESP_LOGV("service.page_home_settings", "qrcode: %i", (qrcode) ? 1 : 0);
            ESP_LOGV("service.page_home_settings", "qrcode_icon: %s", qrcode_icon.c_str());
            ESP_LOGV("service.page_home_settings", "entities_pages: %i", (entities_pages) ? 1 : 0);
            ESP_LOGV("service.page_home_settings", "entities_pages_icon: %s", entities_pages_icon.c_str());
            ESP_LOGV("service.page_home_settings", "alarm_state: %s", alarm_state.c_str());

            // Notification button
            ESP_LOGV("service.page_home_settings", "Notification button - Start");
            id(disp1).send_command_printf("is_notification=%i", (id(notification_text).state.empty() and id(notification_label).state.empty()) ? 0 : 1);
            id(disp1).set_component_text_printf("home.bt_notific", "%s", notification_icon.c_str());
            id(set_component_color).execute("home.bt_notific", id(notification_unread).state ? notification_icon_color_unread : notification_icon_color_normal, {});
            id(home_notify_icon_color_normal) = notification_icon_color_normal;
            id(home_notify_icon_color_unread) = notification_icon_color_unread;

            // QRCode button
            ESP_LOGV("service.page_home_settings", "QRcode button - Start");
            id(disp1).send_command_printf("is_qrcode=%i", (qrcode) ? 1 : 0);
            id(disp1).set_component_text_printf("home.bt_qrcode", "%s", qrcode_icon.c_str());
            id(set_component_color).execute("home.bt_qrcode", qrcode_icon_color, {});

            // Entities pages button
            ESP_LOGV("service.page_home_settings", "Entities pages button - Start");
            id(disp1).send_command_printf("is_entities=%i", (entities_pages) ? 1 : 0);
            id(disp1).set_component_text_printf("home.bt_entities", "%s", entities_pages_icon.c_str());
            id(set_component_color).execute("home.bt_entities", entities_pages_icon_color, {});

            // Alarm button
            ESP_LOGV("service.page_home_settings", "Alarm button - Start");
            id(disp1).send_command_printf("is_alarm=%i", (alarm_state=="" or alarm_state.empty()) ? 0 : 1);
            id(update_alarm_icon)->execute("home.bt_alarm", alarm_state.c_str());

            // Logs - End
            ESP_LOGV("service.page_home_settings", "Finished");

    #### Service to populate the page Settings #####
    - service: page_settings
      variables:
        reboot: string
        sleep_mode: string
        brightness: string
        bright: string
        dim: string
      then:
        - lambda: |-
            ESP_LOGV("service.page_settings", "Starting");
            ESP_LOGV("service.page_settings", "reboot: %s", reboot.c_str());
            ESP_LOGV("service.page_settings", "sleep_mode: %s", sleep_mode.c_str());
            ESP_LOGV("service.page_settings", "brightness: %s", brightness.c_str());
            ESP_LOGV("service.page_settings", "bright: %s", bright.c_str());
            ESP_LOGV("service.page_settings", "dim: %s", dim.c_str());
            if (not reboot.empty()) id(disp1).set_component_text_printf("settings.lbl_reboot", " %s", reboot.c_str());
            if (not sleep_mode.empty()) id(disp1).set_component_text_printf("settings.lbl_sleep", " %s", sleep_mode.c_str());
            id(display_wrapped_text).execute("settings.lbl_brightness", brightness.c_str(), id(display_mode) == 2 ? 25 : 10);
            id(display_wrapped_text).execute("settings.lbl_bright", bright.c_str(), id(display_mode) == 2 ? 25 : 10);
            id(display_wrapped_text).execute("settings.lbl_dim", dim.c_str(), id(display_mode) == 2 ? 25 : 10);

    #### Service to populate the alarm settings page #####
    - service: alarm_settings
      variables:
        page_title: string
        state: string
        supported_features: int
        code_format: string
        code_arm_required: bool
        entity: string
        mui_alarm: string[] #std::vector<std::string> #std::map
      then:
        - lambda: |-
            // Logs - Begin
            ESP_LOGV("service.alarm_settings", "Starting");
            ESP_LOGV("service.alarm_settings", "page_title: %s", page_title.c_str());
            ESP_LOGV("service.alarm_settings", "state: %s", state.c_str());
            ESP_LOGV("service.alarm_settings", "supported_features: %i", supported_features);
            ESP_LOGV("service.alarm_settings", "code_format: %s", code_format.c_str());
            ESP_LOGV("service.alarm_settings", "code_arm_required: %i", (code_arm_required) ? 1 : 0);
            ESP_LOGV("service.alarm_settings", "entity: %s", entity.c_str());

            // set alarm icon on home page
            ESP_LOGV("service.alarm_settings", "Updating home page icon");
            id(disp1).send_command_printf("is_alarm=%i", (state=="" or state.empty()) ? 0 : 1);
            id(update_alarm_icon)->execute("home.bt_alarm", state.c_str());

            // Is page Alarm visible?
            if (id(current_page).state=="alarm")
              { // Update alarm page
                  ESP_LOGV("service.alarm_settings", "Updating alarm page");
                  // Alarm page - Header
                  id(update_alarm_icon)->execute("icon_state", state.c_str());
                  id(disp1).set_component_text_printf("page_label", "%s", page_title.c_str());
                  id(disp1).set_component_text_printf("code_format", "%s", code_format.c_str());
                  if (code_arm_required) id(disp1).set_component_text_printf("code_arm_req", "1"); else id(disp1).set_component_text_printf("code_arm_req", "0");
                  id(disp1).set_component_text_printf("entity", "%s", entity.c_str());

                  // Alarm page - Button's icons
                  id(disp1).set_component_text_printf("bt_home_icon", "\uE689"); //mdi:shield-home
                  id(disp1).set_component_text_printf("bt_away_icon", "\uE99C"); //mdi:shield-lock
                  id(disp1).set_component_text_printf("bt_night_icon", "\uF827"); //mdi:shield-moon
                  id(disp1).set_component_text_printf("bt_vacat_icon", "\uE6BA"); //mdi:shield-airplane
                  id(disp1).set_component_text_printf("bt_bypass_icon", "\uE77F"); //mdi:shield-half-full
                  id(disp1).set_component_text_printf("bt_disarm_icon", "\uE99D"); //mdi:shield-off

                  // Alarm page - Button's text
                  id(display_wrapped_text).execute("bt_home_text", mui_alarm[0].c_str(), 10);
                  id(display_wrapped_text).execute("bt_away_text", mui_alarm[1].c_str(), 10);
                  id(display_wrapped_text).execute("bt_night_text", mui_alarm[2].c_str(), 10);
                  id(display_wrapped_text).execute("bt_vacat_text", mui_alarm[3].c_str(), 10);
                  id(display_wrapped_text).execute("bt_bypass_text", mui_alarm[4].c_str(), 10);
                  id(display_wrapped_text).execute("bt_disarm_text", mui_alarm[5].c_str(), 10);

                  // Alarm page - Buttons
                  if (supported_features & 1) // Alarm - Button - Home
                    {
                      id(disp1).send_command_printf("bt_home_pic.pic=%i", (state=="armed_home") ? 43 : 42);
                      id(disp1).set_component_background_color("bt_home_text", (state=="armed_home") ? 19818 : 52857);
                      id(disp1).set_component_background_color("bt_home_icon", (state=="armed_home") ? 19818 : 52857);
                      id(disp1).set_component_font_color("bt_home_text", (state=="armed_home") ? 65535 : 0);
                      id(disp1).set_component_font_color("bt_home_icon", (state=="armed_home") ? 65535 : 0);
                      if (state=="armed_home") id(disp1).hide_component("bt_home"); else id(disp1).show_component("bt_home");
                    }
                  if (supported_features & 2) // Alarm - Button - Away
                    {
                      id(disp1).send_command_printf("bt_away_pic.pic=%i", (state=="armed_away") ? 43 : 42);
                      id(disp1).set_component_background_color("bt_away_text", (state=="armed_away") ? 19818 : 52857);
                      id(disp1).set_component_background_color("bt_away_icon", (state=="armed_away") ? 19818 : 52857);
                      id(disp1).set_component_font_color("bt_away_text", (state=="armed_away") ? 65535 : 0);
                      id(disp1).set_component_font_color("bt_away_icon", (state=="armed_away") ? 65535 : 0);
                      if (state=="armed_away") id(disp1).hide_component("bt_away"); else id(disp1).show_component("bt_away");
                    }
                  if (supported_features & 4) // Alarm - Button - Night
                    {
                      id(disp1).send_command_printf("bt_night_pic.pic=%i", (state=="armed_night") ? 43 : 42);
                      id(disp1).set_component_background_color("bt_night_text", (state=="armed_night") ? 19818 : 52857);
                      id(disp1).set_component_background_color("bt_night_icon", (state=="armed_night") ? 19818 : 52857);
                      id(disp1).set_component_font_color("bt_night_text", (state=="armed_night") ? 65535 : 0);
                      id(disp1).set_component_font_color("bt_night_icon", (state=="armed_night") ? 65535 : 0);
                      if (state=="armed_night") id(disp1).hide_component("bt_night"); else id(disp1).show_component("bt_night");
                    }
                  if (supported_features & 32) // Alarm - Button - Vacation
                    {
                      id(disp1).send_command_printf("bt_vacat_pic.pic=%i", (state=="armed_vacation") ? 43 : 42);
                      id(disp1).set_component_background_color("bt_vacat_text", (state=="armed_vacation") ? 19818 : 52857);
                      id(disp1).set_component_background_color("bt_vacat_icon", (state=="armed_vacation") ? 19818 : 52857);
                      id(disp1).set_component_font_color("bt_vacat_text", (state=="armed_vacation") ? 65535 : 0);
                      id(disp1).set_component_font_color("bt_vacat_icon", (state=="armed_vacation") ? 65535 : 0);
                      if (state=="armed_vacation") id(disp1).hide_component("bt_vacat"); else id(disp1).show_component("bt_vacat");
                    }
                  if (supported_features & 16) // Alarm - Button - Custom bypass
                    {
                      id(disp1).send_command_printf("bt_bypass_pic.pic=%i", (state=="armed_bypass") ? 43 : 42);
                      id(disp1).set_component_background_color("bt_bypass_text", (state=="armed_bypass") ? 19818 : 52857);
                      id(disp1).set_component_background_color("bt_bypass_icon", (state=="armed_bypass") ? 19818 : 52857);
                      id(disp1).set_component_font_color("bt_bypass_text", (state=="armed_bypass") ? 65535 : 0);
                      id(disp1).set_component_font_color("bt_bypass_icon", (state=="armed_bypass") ? 65535 : 0);
                      if (state=="armed_bypass") id(disp1).hide_component("bt_bypass"); else id(disp1).show_component("bt_bypass");
                    }
                  if ( true ) // Alarm - Button - Disarm
                    {
                      id(disp1).send_command_printf("bt_disarm_pic.pic=%i", (state=="disarmed") ? 43 : 42);
                      id(disp1).set_component_background_color("bt_disarm_text", (state=="disarmed") ? 19818 : 52857);
                      id(disp1).set_component_background_color("bt_disarm_icon", (state=="disarmed") ? 19818 : 52857);
                      id(disp1).set_component_font_color("bt_disarm_text", (state=="disarmed") ? 65535 : 0);
                      id(disp1).set_component_font_color("bt_disarm_icon", (state=="disarmed") ? 65535 : 0);
                      if (state=="disarmed") id(disp1).hide_component("bt_disarm"); else id(disp1).show_component("bt_disarm");
                    }
              }

              // Logs - End
              ESP_LOGV("service.alarm_settings", "Finished");

    #### Service to populate the media player page #####
    - service: media_player
      variables:
        entity: string
        state: string
        is_volume_muted: bool
        friendly_name: string
        volume_level: int
        media_title: string
        media_artist: string
        media_duration: int
        media_position: int
        supported_features: int
      then:
        - lambda: |-
            ESP_LOGV("service.media_player", "Starting");
            if (id(current_page).state == "media_player")
              {
                id(disp1).set_component_text_printf("entity", "%s", entity.c_str());
                id(disp1).set_component_text_printf("page_label", "%s", friendly_name.c_str());
                id(display_wrapped_text).execute("track", media_title.c_str(), id(display_mode) == 2 ? 15 : 27);
                id(display_wrapped_text).execute("artist", media_artist.c_str(), id(display_mode) == 2 ? 26 : 40);
                // states:
                //   OFF: Entity is turned off and is not accepting commands until turned on.
                //   ON: Entity is turned on, but no details on its state is currently known.
                //   IDLE: Entity is turned on and accepting commands, but currently not playing any media. Possibly at some idle home screen.
                //   PLAYING: Entity is currently playing media.
                //   PAUSED: Entity has an active media and is currently paused
                //   STANDBY: Entity is in a low power state, accepting commands.
                //   BUFFERING: Entity is preparing to start playback of some media
                // feature:
                //   PAUSE: 1
                //   SEEK: 2
                //   VOLUME_SET: 4
                //   VOLUME_MUTE: 8
                //   PREVIOUS_TRACK: 16
                //   NEXT_TRACK: 32
                //   reserved: 64
                //   TURN_ON: 128
                //   TURN_OFF: 256
                //   PLAY_MEDIA: 512
                //   VOLUME_STEP: 1024
                //   SELECT_SOURCE: 2048
                //   STOP: 4096
                //   CLEAR_PLAYLIST: 8192
                //   PLAY: 16384
                //   SHUFFLE_SET: 32768
                //   SELECT_SOUND_MODE: 65536
                //   BROWSE_MEDIA: 131072
                //   REPEAT_SET: 262144
                //   GROUPING: 524288
                //   MEDIA_ANNOUNCE: 1048576
                //   MEDIA_ENQUEUE: 2097152

                // on/off button
                if (supported_features & 128 and state == "off") //TURN_ON
                  {
                    id(set_component_color).execute("bt_on_off", { 65535 }, {} );
                    id(disp1).show_component("bt_on_off");
                  }
                else if (supported_features & 256 and state != "off") //TURN_OFF
                  {
                    id(set_component_color).execute("bt_on_off", { 10597 }, {} );
                    id(disp1).show_component("bt_on_off");
                  }
                else id(disp1).hide_component("bt_on_off");

                // play/pause button
                if ((supported_features & 512 or supported_features & 16384) and state != "playing" and state != "off") //PLAY_MEDIA+PLAY
                  {
                    id(disp1).set_component_text_printf("bt_play_pause", "%s", "\uE409"); // mdi:play
                    id(disp1).show_component("bt_play_pause");
                  }
                else if (supported_features & 1 and state == "playing" ) //PAUSE
                  {
                    id(disp1).set_component_text_printf("bt_play_pause", "%s", "\uE3E3"); // mdi:pause
                    id(disp1).show_component("bt_play_pause");
                  }
                else id(disp1).hide_component("bt_play_pause");

                // bt_prev button - PREVIOUS_TRACK
                if (supported_features & 16 and state != "off") id(disp1).show_component("bt_prev"); else id(disp1).hide_component("bt_prev");
                // bt_next button - NEXT_TRACK
                if (supported_features & 32 and state != "off") id(disp1).show_component("bt_next"); else id(disp1).hide_component("bt_next");

                // Stop button - STOP
                if (supported_features & 4096 and (state == "playing" or state == "paused")) id(disp1).show_component("bt_stop"); else id(disp1).hide_component("bt_stop");

                // mute/unmute button - VOLUME_MUTE
                id(disp1).set_component_value("is_muted", (is_volume_muted) ? 1 : 0);
                if (supported_features & 8 and is_volume_muted) // unmute
                  {
                    id(disp1).set_component_text_printf("bt_mute", "%s", "\uE57E"); // mdi:volume-low
                    id(disp1).show_component("bt_mute");
                  }
                else if (supported_features & 8) // mute
                  {
                    id(disp1).set_component_text_printf("bt_mute", "%s", "\uEE07"); // mdi:volume-variant-off
                    id(disp1).show_component("bt_mute");
                  }
                else id(disp1).hide_component("bt_mute");

                // VOLUME_SET
                if (supported_features & 4)
                  {
                    id(disp1).set_component_text_printf("vol_text", "%i%%", volume_level);
                    id(disp1).set_component_value("vol_slider", volume_level);
                    id(disp1).show_component("vol_slider");
                    id(disp1).show_component("bt_vol_down");
                    id(disp1).show_component("bt_vol_up");
                    id(disp1).show_component("vol_text");
                  }
                else
                  {
                    id(disp1).hide_component("vol_slider");
                    id(disp1).hide_component("bt_vol_down");
                    id(disp1).hide_component("bt_vol_up");
                    id(disp1).hide_component("vol_text");
                  }

                if (media_duration > 0)
                  {
                    id(disp1).set_component_text_printf("time_current", "%i", media_position);
                    id(disp1).set_component_text_printf("time_total", "%i", media_duration);
                    id(disp1).set_component_value("prg_current", media_position);
                    id(disp1).set_component_value("prg_total", media_duration);
                    id(disp1).send_command_printf("prg_timer.en=%i", (state == "playing") ? 1 : 0);
                    id(disp1).show_component("time_current");
                    id(disp1).show_component("time_total");
                    id(disp1).show_component("time_progress");
                  }
                else
                  {
                    id(disp1).send_command_printf("prg_timer.en=0");
                    id(disp1).hide_component("time_current");
                    id(disp1).hide_component("time_total");
                    id(disp1).hide_component("time_progress");
                  }
              }

##### START - GLOBALS CONFIGURATION #####
globals:

  ##### Display mode (1 = EU, 2 = US, 3 = US Landscape)
  - id: display_mode
    type: int
    restore_value: true
    initial_value: '0'

  ##### Entity Id of the entity displayed on the detailed pages
  - id: entity_id
    type: std::string
    restore_value: no
    initial_value: ''

  ##### Is embedded thermostat set as main climate entity? #####
  - id: is_embedded_thermostat
    type: bool
    restore_value: true
    initial_value: 'false'

  ##### Save Display Brightness for NSPanel reboot #####
  - id: display_brightness_global
    type: int
    restore_value: true
    initial_value: '100'

  ##### Save Display DIM Brightness for NSPanel reboot
  - id: display_dim_brightness_global
    type: int
    restore_value: true
    initial_value: '10'

  ##### Temperature unit #####
  ##### Is embedded sensor used for indoor temperature? #####
  - id: embedded_indoor_temp
    type: bool
    restore_value: true
    initial_value: 'true'
  - id: temp_unit_fahrenheit
    type: bool
    restore_value: true
    initial_value: 'false'

  ##### Date/time formats #####
  #- id: mui_date_format
  #  type: std::string
  #  restore_value: no
  #  initial_value: '"%A, %d.%m"'
  - id: home_date_color
    type: int
    restore_value: true
    initial_value: '65535'

  - id: mui_time_format
    type: std::string
    restore_value: no
    initial_value: '"%H:%M"'

  - id: home_time_color
    type: int
    restore_value: true
    initial_value: '65535'

  ##### Relay icons #####
  - id: home_relay1_icon
    type: std::string
    restore_value: false
    initial_value: ''

  - id: home_relay1_icon_color
    type: int
    restore_value: true
    initial_value: '65535'

  - id: home_relay2_icon
    type: std::string
    restore_value: false
    initial_value: ''

  - id: home_relay2_icon_color
    type: int
    restore_value: true
    initial_value: '65535'

  - id: home_notify_icon_color_normal
    type: std::vector<int>
    restore_value: false
    #initial_value: '52857'

  - id: home_notify_icon_color_unread
    type: std::vector<int>
    restore_value: false
    #initial_value: '63488'

  ##### Versions #####
  - id: version_blueprint
    type: std::string
    restore_value: false
    initial_value: ''
  - id: version_tft
    type: std::string
    restore_value: false
    initial_value: ''

##### START - BINARY SENSOR CONFIGURATION #####
binary_sensor:

  ###### LEFT BUTTON BELOW DISPLAY TO TOGGLE RELAY#####
  - name: ${device_name} Left Button
    platform: gpio
    id: left_button
    pin:
      number: 14
      inverted: true
    on_multi_click:
      - timing: &long_click-timing
          - ON for at least 0.8s
        then:
          - logger.log: "Left button - Long click"
          - script.execute:
              id: ha_button
              page: !lambda return id(current_page).state;
              component: "hw_bt_left"
              command: "long_click"
      - timing: &short_click-timing
          - ON for at most 0.8s
        then:
          - logger.log: "Left button - Short click"
          - if:
              condition:
                - switch.is_on: relay1_local
              then:
                - switch.toggle: relay_1
                - script.execute: refresh_relays
          - script.execute:
              id: ha_button
              page: !lambda return id(current_page).state;
              component: "hw_bt_left"
              command: "short_click"

  ##### RIGHT BUTTON BELOW DISPLAY TO TOGGLE RELAY #####
  - name: ${device_name} Right Button
    platform: gpio
    id: right_button
    pin:
      number: 27
      inverted: true
    on_multi_click:
      - timing: *long_click-timing
        then:
          - logger.log: "Right button - Long click"
          - script.execute:
              id: ha_button
              page: !lambda return id(current_page).state;
              component: "hw_bt_right"
              command: "long_click"
      - timing: *short_click-timing
        then:
          - logger.log: "Right button - Short click"
          - if:
              condition:
                - switch.is_on: relay2_local
              then:
                - switch.toggle: relay_2
                - script.execute: refresh_relays
          - script.execute:
              id: ha_button
              page: !lambda return id(current_page).state;
              component: "hw_bt_right"
              command: "short_click"

  ##### Restart NSPanel Button - Setting Page #####
  - name: ${device_name} Restart
    platform: nextion
    page_id: 7
    component_id: 9
    internal: true
    on_click:
      - button.press: restart_nspanel

  ##### Restart NSPanel Button - Boot Page #####
  - name: ${device_name} Restart
    platform: nextion
    page_id: 8
    component_id: 4
    internal: true
    on_click:
      - button.press: restart_nspanel

  ##### Sleep mode NSPanel Button #####
  - name: ${device_name} Sleep mode
    platform: nextion
    page_id: 7
    component_id: 10
    internal: true
    on_click:
      - logger.log: "Sleep mode - Nextion toggle"
      - switch.toggle: sleep_mode

  ##### global variable to keep track on whether the Nextion display is ready or not.
  ## Delays initial info from HA to the display #####
  - name: ${device_name} Nextion display
    id: nextion_init
    platform: template
    device_class: connectivity
    publish_initial_state: true
    entity_category: diagnostic
    icon: mdi:tablet-dashboard

  ##### API connection status
  - name: ${device_name} Status
    platform: status
    id: api_status
    on_state:
      then:
        - script.execute:
            id: refresh_wifi_icon

##### START - SENSOR CONFIGURATION #####
sensor:

  ##### touchevent sensor, Reset the page timeout #####
  - id: touchevent
    platform: nextion
    nextion_id: disp1
    component_name: touchevent
    internal: true
    on_value:
      then:
        - lambda: |-
            id(page_timer)->execute();

  ##### Send current brightness info to Home Assistant
  - name: ${device_name} Brightness
    id: brightness
    platform: nextion
    variable_name: dim
    #update_interval: 1s
    internal: false
    precision: 0

  ##### Uptime Sensors #####
  - name: ${device_name} Uptime seconds
    id: uptime_sec
    platform: uptime
    internal: true

  - name: ${device_name} API uptime
    id: api_timestamp
    platform: template
    lambda: 'return id(time_provider).now().timestamp;'
    internal: false
    device_class: timestamp
    entity_category: diagnostic
    accuracy_decimals: 0
    update_interval: never

  - name: ${device_name} Device uptime
    id: device_timestamp
    platform: template
    lambda: 'return (id(time_provider).now().timestamp - id(uptime_sec).state);'
    internal: false
    device_class: timestamp
    entity_category: diagnostic
    accuracy_decimals: 0
    update_interval: never

  ##### WIFI Signal stregth
  - name: ${device_name} RSSI
    platform: wifi_signal
    update_interval: 60s
    on_value:
      - script.execute:
          id: refresh_wifi_icon

  ##### INTERNAL TEMPERATURE SENSOR, ADC VALUE #####
  - id: ntc_source
    platform: adc
    pin: 38
    update_interval: 60s
    attenuation: 11db

  ##### INTERNAL TEMPERATURE SENSOR, adc reading converted to resistance (calculation)#####
  - id: resistance_sensor
    platform: resistance
    sensor: ntc_source
    configuration: DOWNSTREAM
    resistor: 11.2kOhm

  ##### INTERNAL TEMPERATURE SENSOR, resistance to temperature (calculation) #####
  - name: ${device_name} Temperature
    platform: ntc
    id: temp_nspanel
    sensor: resistance_sensor
    calibration:
      b_constant: 3950
      reference_temperature: 25°C
      reference_resistance: 10kOhm
    filters:
      - lambda: return x + id(temperature_correction).state;
    on_value:
      then:
        # Show panel's temperature if API or Wi-Fi are out
        - lambda: id(display_embedded_temp)->execute();

  ###### Display Brightness GET VALUE FROM NSPanel SLIDER #####
  - name: ${device_name} brightness Slider
    platform: nextion
    id: brightslider
    variable_name: brightslider
    internal: true
    on_value:
      then:
        - number.set:
            id: display_brightness
            value: !lambda 'return int(x);'

  ###### Display DIM Brightness GET VALUE FROM NSPanel SLIDER #####
  - name: ${device_name} dim brightness slider
    platform: nextion
    id: dimslider
    variable_name: dimslider
    internal: true
    on_value:
      then:
        - number.set:
            id: display_dim_brightness
            value: !lambda 'return int(x);'

##### START - TEXT SENSOR CONFIGURATION #####
text_sensor:

  ##### Current page name #####
  - name: ${device_name} current page
    platform: template
    id: current_page
    internal: false
    disabled_by_default: false

  ##### ESPhome version used to compile the app #####
  - name: ${device_name} ESPhome Version
    platform: version
    disabled_by_default: true

  - platform: wifi_info
    ip_address:
      name: ${device_name} IP
      disabled_by_default: true
      id: ip_address
    ssid:
      name: ${device_name} SSID
      disabled_by_default: true
    bssid:
      name: ${device_name} BSSID
      disabled_by_default: true

  - name: ${device_name} Notification Label
    platform: template
    id: notification_label

  - name: ${device_name} Notification Text
    platform: template
    id: notification_text

  ##### NSPanel event sensor, the main action sensor - push to HA #####
  - name: ${device_name} NSPanel event
    platform: nextion
    nextion_id: disp1
    id: disp1_nspanel_event
    component_name: nspanelevent
    internal: true
    filters:
      - lambda: |-
          x = x.c_str();
          x.shrink_to_fit();
          return x;
    on_value:
      then:
        - lambda: |-
            ESP_LOGV("text_sensor.nspanelevent", "Starting");
            id(page_timer)->execute();
            DynamicJsonDocument doc(1024);
            deserializeJson(doc, x);
            std::string page = doc["page"];
            std::string component = doc["component"];
            std::string value = doc["value"];
            std::string entity = doc["entity"];
            ESP_LOGV("text_sensor.nspanelevent", "page: %s", page.c_str());
            ESP_LOGV("text_sensor.nspanelevent", "component: %s", component.c_str());
            ESP_LOGV("text_sensor.nspanelevent", "value: %s", value.c_str());
            ESP_LOGV("text_sensor.nspanelevent", "entity: %s", entity.c_str());
            auto ha_event = new esphome::api::CustomAPIDevice();
            ha_event->fire_homeassistant_event("esphome.nspanel_ha_blueprint",
              {
                {"type", "generic"},
                {"page", page},
                {"component", component},
                {"value", value},
                {"entity", entity}
              });
            if (component=="currentpage")
              {
                ESP_LOGD("text_sensor.nspanelevent", "New page: %s", page.c_str());
                ESP_LOGV("text_sensor.nspanelevent", "Trigger HA event");
                ha_event->fire_homeassistant_event("esphome.nspanel_ha_blueprint",
                  {
                    {"type", "page_changed"},
                    {"page", page},
                    {"entity", entity}
                  });
                  ESP_LOGV("text_sensor.nspanelevent", "Call add-ons scripts for new page");
                id(addon_climate_set_climate).execute(page=="climate" and entity=="embedded_climate");
                ESP_LOGV("text_sensor.nspanelevent", "Publish current_page sensor");
                id(current_page).publish_state(page);
                ESP_LOGV("text_sensor.nspanelevent", "Construct new page");
                if (page=="home")
                  {
                    ESP_LOGV("text_sensor.nspanelevent", "Construct home page");
                    id(update_page_home).execute();
                  }
                else if (page=="screensaver")
                  {
                    ESP_LOGV("text_sensor.nspanelevent", "Construct screensaver page");
                    int wakeup_page_id = 0;
                    if (id(wakeup_page_name).state == "buttonpage01") wakeup_page_id = 12;
                    else if (id(wakeup_page_name).state == "buttonpage02") wakeup_page_id = 13;
                    else if (id(wakeup_page_name).state == "buttonpage03") wakeup_page_id = 14;
                    else if (id(wakeup_page_name).state == "buttonpage04") wakeup_page_id = 15;
                    else if (id(wakeup_page_name).state == "entitypage01") wakeup_page_id = 18;
                    else if (id(wakeup_page_name).state == "entitypage02") wakeup_page_id = 19;
                    else if (id(wakeup_page_name).state == "entitypage03") wakeup_page_id = 20;
                    else if (id(wakeup_page_name).state == "entitypage04") wakeup_page_id = 21;
                    else if (id(wakeup_page_name).state == "qrcode") wakeup_page_id = 17;
                    else if (id(wakeup_page_name).state == "alarm") wakeup_page_id = 23;
                    ESP_LOGV("text_sensor.nspanelevent", "Wake-up page id: %i", wakeup_page_id);
                    id(disp1).set_component_value("orign", wakeup_page_id);
                  }
                else if (page=="climate")
                  {
                    ESP_LOGV("text_sensor.nspanelevent", "Construct climate page");
                    id(disp1).set_component_text_printf("climate.button01_icon", "%s", "\uEE8D"); //mdi:calendar-sync
                    id(disp1).set_component_text_printf("climate.button02_icon", "%s", "\uE069"); //mdi:autorenew
                    id(disp1).set_component_text_printf("climate.button03_icon", "%s", "\uE237"); //mdi:fire
                    id(disp1).set_component_text_printf("climate.button04_icon", "%s", "\uE716"); //mdi:snowflake
                    id(disp1).set_component_text_printf("climate.button05_icon", "%s", "\uE58D"); //mdi:water-percent
                    id(disp1).set_component_text_printf("climate.button06_icon", "%s", "\uE20F"); //mdi:fan
                    id(disp1).set_component_text_printf("climate.button07_icon", "%s", "\uE424"); //mdi:power
                    id(addon_climate_update_page_climate)->execute();
                  }
                else if (page=="cover")
                  {
                    ESP_LOGV("text_sensor.nspanelevent", "Construct cover page");
                    id(disp1).set_component_text_printf("cover.cover_stop", "%s", "\uE666"); //mdi:stop-circle-outline
                    // In the future this will be dynamically contructed based on the device_class
                    id(disp1).set_component_text_printf("cover.cover_open", "%s", "\uF11D"); //mdi:window-shutter-open
                    id(disp1).set_component_text_printf("cover.cover_close", "%s", "\uF11B"); //mdi:window-shutter
                  }
                else if (page=="fan")
                  {
                    ESP_LOGV("text_sensor.nspanelevent", "Construct fan page");
                    id(disp1).set_component_text_printf("fan.button_on", "%s", "\uE20F"); //mdi:fan
                    id(disp1).set_component_text_printf("fan.button_off", "%s", "\uE81C"); //mdi:fan-off
                    id(disp1).set_component_text_printf("fan.button_up", "%s", "\uF46D"); //mdi:fan-chevron-up
                    id(disp1).set_component_text_printf("fan.button_down", "%s", "\uF46C"); //mdi:fan-chevron-down
                  }
                else if (page=="keyb_num")
                  {
                    ESP_LOGV("text_sensor.nspanelevent", "Construct keyb_num page");
                    id(disp1).set_component_text_printf("keyb_num.bview", "%s", "\uE207"); //mdi:eye
                    id(disp1).set_component_text_printf("keyb_num.bclose", "%s", "\uE158"); //mdi:close-circle
                    id(disp1).set_component_text_printf("keyb_num.bclear", "%s", "\uE641"); //mdi:eraser-variant
                    id(disp1).set_component_text_printf("keyb_num.benter", "%s", "\uE12B"); //mdi:check
                  }
                else if (page=="weather01") id(disp1).set_component_text_printf("page_index", "%s", "\uE764\uE765\uE765\uE765\uE765"); // 1/5
                else if (page=="weather02") id(disp1).set_component_text_printf("page_index", "%s", "\uE765\uE764\uE765\uE765\uE765"); // 2/5
                else if (page=="weather03") id(disp1).set_component_text_printf("page_index", "%s", "\uE765\uE765\uE764\uE765\uE765"); // 3/5
                else if (page=="weather04") id(disp1).set_component_text_printf("page_index", "%s", "\uE765\uE765\uE765\uE764\uE765"); // 4/5
                else if (page=="weather05") id(disp1).set_component_text_printf("page_index", "%s", "\uE765\uE765\uE765\uE765\uE764"); // 5/5
                else if (page=="buttonpage01" or page=="entitypage01") id(disp1).set_component_text_printf("page_index", "%s", "\uE764\uE765\uE765\uE765"); // 1/4
                else if (page=="buttonpage02" or page=="entitypage02") id(disp1).set_component_text_printf("page_index", "%s", "\uE765\uE764\uE765\uE765"); // 2/4
                else if (page=="buttonpage03" or page=="entitypage03") id(disp1).set_component_text_printf("page_index", "%s", "\uE765\uE765\uE764\uE765"); // 3/4
                else if (page=="buttonpage04" or page=="entitypage04") id(disp1).set_component_text_printf("page_index", "%s", "\uE765\uE765\uE765\uE764"); // 4/4
                else if (page=="settings") id(disp1).set_component_text_printf("bt_sleep", "%s", (id(sleep_mode).state) ? "\uEA19" : "\uEA18"); //mdi:toggle-switch-outline or mdi:toggle-switch-off-outline
                else if (page=="notification")
                  {
                    id(disp1).set_component_text_printf("notification.notifi_label", "%s", id(notification_label).state.c_str());
                    id(display_wrapped_text).execute("notification.notifi_text01", id(notification_text).state.c_str(), id(display_mode) == 2 ? 23 : 32);
                  }
                else if (page=="media_player")
                  {
                    ESP_LOGV("text_sensor.nspanelevent", "Construct media_player page");
                    id(disp1).set_component_text_printf("bt_on_off", "%s", "\uE424"); //mdi:power
                    id(disp1).set_component_text_printf("bt_prev", "%s", "\uE4AD"); //mdi:skip-previous
                    id(disp1).set_component_text_printf("bt_next", "%s", "\uE4AC"); //mdi:skip-next
                    id(disp1).set_component_text_printf("bt_play_pause", "%s", "\uE40D"); //mdi:play-pause
                    id(disp1).set_component_text_printf("bt_stop", "%s", "\uE4DA"); //mdi:stop
                    id(disp1).set_component_text_printf("bt_mute", "%s", "\uE75E"); //mdi:volume-mute
                    id(disp1).set_component_text_printf("bt_vol_down", "%s", "\uE75D"); //mdi:volume-minus
                    id(disp1).set_component_text_printf("bt_vol_up", "%s", "\uE75C"); //mdi:volume-plus
                  }
              }

  ##### NSPanel event - Execute actions from ESPHome - NO push to HA #####
  - name: ${device_name} NSPanel local event
    platform: nextion
    nextion_id: disp1
    id: disp1_local_event
    component_name: localevent
    internal: true
    filters:
      - lambda: |-
          x = x.c_str();
          x.shrink_to_fit();
          return x;
    on_value:
      then:
        - lambda: |-
            ESP_LOGV("text_sensor.localevent", "Starting");
            id(page_timer)->execute();
            DynamicJsonDocument doc(1024);
            deserializeJson(doc, x);
            std::string page = doc["page"];
            ESP_LOGV("text_sensor.localevent", "page: %s", page.c_str());
            std::string event = doc["event"];
            ESP_LOGV("text_sensor.localevent", "event: %s", event.c_str());
            std::string component = doc["component"];
            ESP_LOGV("text_sensor.localevent", "component: %s", component.c_str());
            std::string key = doc["key"];
            ESP_LOGV("text_sensor.localevent", "key: %s", key.c_str());
            std::string value = doc["value"];
            ESP_LOGV("text_sensor.localevent", "value: %s", value.c_str());
            std::string entity = doc["entity"];
            ESP_LOGV("text_sensor.localevent", "entity: %s", entity.c_str());
            int embedded = doc["embedded"];
            ESP_LOGV("text_sensor.localevent", "embedded: %i", embedded);
            std::string service = "";

            // send event to Home Assistant
            auto ha_event = new esphome::api::CustomAPIDevice();
            if (event=="pagechanged")
              {
                ESP_LOGD("text_sensor.localevent", "New page: %s", page.c_str());
                ESP_LOGV("text_sensor.localevent", "Trigger HA event");
                ha_event->fire_homeassistant_event("esphome.nspanel_ha_blueprint",
                  {
                    {"type", "page_changed"},
                    {"page", page},
                    {"entity", entity}
                  });
                  ESP_LOGV("text_sensor.localevent", "Call add-ons scripts for new page");
                id(addon_climate_set_climate).execute(page=="climate" and id(entity_id) == "embedded_climate");
                ESP_LOGV("text_sensor.localevent", "Publish current_page sensor");
                id(current_page).publish_state(page);
                ESP_LOGV("text_sensor.localevent", "Construct new page");
              }
            else if (event=="short_click" or event=="long_click") id(ha_button)->execute(page.c_str(), component.c_str(), event.c_str());
            else if (page == "light" or page == "climate" or page == "notification" or page == "media_player")// Generic event
              {
                ha_event->fire_homeassistant_event("esphome.nspanel_ha_blueprint",
                  {
                    {"type", "generic"},
                    {"page", page},
                    {"event", event},
                    {"value", value},
                    {"entity", entity}
                  });
              }

            // page based actions
            if (page == "alarm")
              {
                std::string code_format = doc["code_format"];
                std::string code_arm_req = doc["code_arm_req"];
                std::string title = doc["mui"];
                if (code_format=="number" and (key=="disarm" or code_arm_req=="1"))
                  {
                    id(disp1).send_command_printf("page keyb_num");
                    id(disp1).set_component_value("keyb_num.page_id", 23); //Calling from Alarm page
                    id(disp1).set_component_text_printf("keyb_num.domain", "%s", page.c_str());
                    id(disp1).set_component_text_printf("keyb_num.key", "%s", key.c_str());
                    id(disp1).set_component_text_printf("keyb_num.value", "%s", value.c_str());
                    id(disp1).set_component_text_printf("keyb_num.entity", "%s", entity.c_str());
                    id(disp1).set_component_text_printf("keyb_num.title", "%s", title.c_str());
                  }
                else id(service_call_alarm_control_panel)->execute(entity.c_str(), key.c_str(), code_format.c_str(), "");
              }
            else if (page=="boot")
              {
                // Detect display mode - Need review
                if (doc.containsKey("display_mode"))
                  {
                    std::string display_mode_str = doc["display_mode"];
                    ESP_LOGV("text_sensor.localevent", "display_mode: %s", display_mode_str.c_str());
                    float display_mode_float = stof(display_mode_str);
                    if (display_mode_float > 0) id(display_mode) = int(display_mode_float);
                  }

                // Detect TFT version
                if (doc.containsKey("version"))
                  {
                    std::string version_tmp = doc["version"];
                    id(version_tft) = version_tmp;
                  }
                id(check_versions).execute();

                // Detect timeout
                if (event=="timeout")
                  {
                    ESP_LOGV("text_sensor.localevent", "Trigger boot timeout event");
                    ha_event->fire_homeassistant_event("esphome.nspanel_ha_blueprint",
                      {
                        {"type", "boot"},
                        {"step", "timeout"},
                        {"value", value}
                      });
                    if (stof(value) >= 5)
                      {
                        ESP_LOGV("text_sensor.localevent", "Jump to wakeup page: %s", id(wakeup_page_name).state.c_str());
                        id(disp1).send_command_printf("page %s", id(wakeup_page_name).state.c_str());
                      }
                  }
              }
            else if (page == "climate") id(service_call_climate)->execute(entity.c_str(), key.c_str(), value.c_str(), (embedded==1));
            else if (page == "cover")
              {
                if (key == "position") id(ha_call_service)->execute("cover.set_cover_position", key.c_str(), value.c_str(), entity.c_str());
                else id(ha_call_service)->execute((std::string("cover.") + key.c_str()), "", "", entity.c_str());
              }
            else if (page == "fan")
              {
                if (key == "stop" or value == "0") id(ha_call_service)->execute("fan.turn_off", "", "", entity.c_str());
                else id(ha_call_service)->execute("fan.turn_on", key.c_str(), value.c_str(), entity.c_str());
              }
            else if (page == "keyb_num")
              {
                std::string base_domain = doc["base_domain"];
                if (base_domain == "alarm")
                {
                  std::string code_format = doc["code_format"];
                  std::string pin = doc["pin"];
                  id(service_call_alarm_control_panel)->execute(entity.c_str(), key.c_str(), code_format.c_str(), pin.c_str());
                }
                else if (base_domain == "" or base_domain.empty()) base_domain = "home";
                id(disp1).send_command_printf("page %s", base_domain.c_str());
              }
            else if (page == "light") id(ha_call_service)->execute("light.turn_on", key.c_str(), value.c_str(), entity.c_str());
            else if (page == "media_player")
              {
                if (key == "volume_mute") id(ha_call_service)->execute("media_player.volume_mute", "is_volume_muted", value.c_str(), entity.c_str());
                else if (key == "volume_set") id(ha_call_service)->execute("media_player.volume_set", "volume_level", to_string(stof(value) / 100), entity.c_str());
                else if (not key.empty()) id(ha_call_service)->execute((std::string("media_player.") + key.c_str()), "", "", entity.c_str());
              }

            ESP_LOGV("text_sensor.localevent", "Finished");

##### START - SWITCH CONFIGURATION #####
switch:

  ##### Notification unread #####
  - name: ${device_name} Notification unread
    platform: template
    id: notification_unread
    entity_category: config
    optimistic: true
    restore_mode: ALWAYS_OFF
    on_turn_on:
      - lambda: id(set_component_color).execute("home.bt_notific", id(home_notify_icon_color_unread), {});
    on_turn_off:
      - lambda: id(set_component_color).execute("home.bt_notific", id(home_notify_icon_color_normal), {});

  ##### Notification sound #####
  - name: ${device_name} Notification sound
    platform: template
    id: notification_sound
    entity_category: config
    optimistic: true
    restore_mode: RESTORE_DEFAULT_OFF

  ##### PHYSICAL SWITCH 1 #####
  - name: ${device_name} Relay 1
    platform: gpio
    id: relay_1
    pin:
      number: 22
    restore_mode: RESTORE_DEFAULT_OFF
    on_turn_on:
      then:
        - script.execute:
            id: refresh_relays
    on_turn_off:
      then:
        - script.execute:
            id: refresh_relays
  ##### PHYSICAL SWITCH 2 ######
  - name: ${device_name} Relay 2
    platform: gpio
    id: relay_2
    pin:
      number: 19
    restore_mode: RESTORE_DEFAULT_OFF
    on_turn_on:
      then:
        - script.execute:
            id: refresh_relays
    on_turn_off:
      then:
        - script.execute:
            id: refresh_relays

  ##### DISPLAY ALWAYS ON #####
  - name: ${device_name} Screen Power
    platform: gpio
    id: screen_power
    entity_category: config
    pin:
      number: 4
      inverted: true
    restore_mode: ALWAYS_ON
    internal: true

  ##### Switch Display Sleep mode #####
  - name: ${device_name} Sleep mode
    platform: template
    device_class: switch
    id: sleep_mode
    entity_category: config
    restore_mode: RESTORE_DEFAULT_OFF
    optimistic: false
    turn_on_action: &sleep_mode-turn_on
      - lambda: |-
          ESP_LOGV("switch.sleep_mode", "Turn on");
          id(disp1).send_command_printf("sleep_mode=1");
          id(disp1).set_component_value("settings.bt_sleep",1);
          id(disp1).set_component_text_printf("settings.bt_sleep", "%s", "\uEA19");
          id(sleep_mode).publish_state(true);
    turn_off_action: &sleep_mode-turn_off
      - lambda: |-
          ESP_LOGV("switch.sleep_mode", "Turn off");
          id(disp1).send_command_printf("sleep_mode=0");
          id(disp1).set_component_value("settings.bt_sleep",0);
          id(disp1).set_component_text_printf("settings.bt_sleep", "%s", "\uEA18");
          id(sleep_mode).publish_state(false);

  ##### Relay Local control #####
  - name: ${device_name} Relay 1 Local
    platform: template
    id: relay1_local
    entity_category: config
    optimistic: true
    restore_mode: RESTORE_DEFAULT_OFF
    internal: true
    on_turn_on:
      - logger.log: "Relay 1 Local turned On!"
    on_turn_off:
      - logger.log: "Relay 1 Local turned Off!"
  - name: ${device_name} Relay 2 Local
    platform: template
    id: relay2_local
    entity_category: config
    optimistic: true
    restore_mode: RESTORE_DEFAULT_OFF
    internal: true
    on_turn_on:
      - logger.log: "Relay 2 Local turned On!"
    on_turn_off:
      - logger.log: "Relay 2 Local turned Off!"

##### START - NUMBER CONFIGURATION #####
number:

  ##### SCREEN BRIGHTNESS #####
  - platform: template
    name: ${device_name} Display Brightness
    id: display_brightness
    entity_category: config
    unit_of_measurement: '%'
    min_value: 1
    max_value: 100
    step: 1
    restore_value: true
    optimistic: true
    set_action:
      then:
        - lambda: |-
            id(display_brightness_global) = int(x);
            id(disp1).send_command_printf("brightness=%i", int(x));
            id(disp1).send_command_printf("settings.brightslider.val=%i", int(x));
            if (id(current_page).state != "screensaver")
              {
                id(disp1).set_backlight_brightness(x/100);
                id(disp1).send_command_printf("home.dimtimer.en=1");
              }
            if (id(current_page).state == "settings")
              {
                id(disp1).set_component_text_printf("bright_text", "%i%%", int(x));
              }

  ##### SCREEN BRIGHTNESS DIMMED DOWN #####
  - platform: template
    name: ${device_name} Display Brightness Dimdown
    id: display_dim_brightness
    entity_category: config
    unit_of_measurement: '%'
    min_value: 1
    max_value: 100
    step: 1
    restore_value: true
    optimistic: true
    set_action:
      then:
        - lambda: |-
            id(display_dim_brightness_global) = int(x);
            id(disp1).send_command_printf("brightness_dim=%i", int(x));
            id(disp1).send_command_printf("settings.dimslider.val=%i", int(x));
            if (id(current_page).state == "settings") id(disp1).set_component_text_printf("dim_text", "%i%%", int(x));

  ##### Temperature Correction #####
  - name: ${device_name} Temperature Correction
    platform: template
    id: temperature_correction
    entity_category: config
    unit_of_measurement: '°C'
    initial_value: 0
    min_value: -10
    max_value: 10
    step: 0.1
    restore_value: true
    internal: false
    optimistic: true
    set_action:
      - logger.log: Temperature correction changed.
      - delay: 1s
      - lambda: id(temp_nspanel).publish_state(id(temp_nspanel).raw_state);

  ##### page-timeout #####
  - platform: template
    name: ${device_name} Page timeout
    id: page_timeout
    entity_category: config
    min_value: 0
    max_value: 60
    initial_value: 5
    step: 1
    restore_value: true
    optimistic: true

  ##### dimming-timeout #####
  - platform: template
    name: ${device_name} Dimming timeout
    id: dimming_timeout
    entity_category: config
    min_value: 0
    max_value: 60
    initial_value: 15
    step: 1
    restore_value: true
    optimistic: true

select:
  - id: wakeup_page_name
    name: ${device_name} Wake-up page
    platform: template
    options:
      - home
      - buttonpage01
      - buttonpage02
      - buttonpage03
      - buttonpage04
      - entitypage01
      - entitypage02
      - entitypage03
      - entitypage04
      - qrcode
      - alarm
    initial_option: home
    optimistic: true
    restore_value: true
    internal: false
    entity_category: config
    icon: mdi:page-next-outline
    #set_action:
    #  - logger.log:
    #      format: "Wake-up page set: %s"
    #      args: ["x.c_str()"]

##### START - DISPLAY START CONFIGURATION #####
display:
  - id: disp1
    platform: nextion
    uart_id: tf_uart
    tft_url: ${nextion_update_url}
    on_page: # I couldn't make this trigger to work, so used text_sensor nspanelevent and localevent instead
      - lambda: ESP_LOGW("display.disp1", "NEXTION PAGE CHANGED");
    on_setup:
      then:
        - lambda: |-
            ESP_LOGV("display.disp1", "Starting");
            id(disp1).send_command_printf("page 8");
            id(disp1).set_component_text_printf("boot.esph_version", "%s", "${version}"); // ### esphome-version ###
            id(disp1).show_component("bt_reboot");
        - wait_until:
            api.connected
        - lambda: |-
            id(disp1).set_component_text_printf("boot.ip_addr", "%s", id(ip_address).state.c_str());
            auto ha_event = new esphome::api::CustomAPIDevice();
            ha_event->fire_homeassistant_event("esphome.nspanel_ha_blueprint",
              {
                {"type", "boot"},
                {"step", "start"}
              });
        - delay: 1s
        - if:
            condition:
              switch.is_off: sleep_mode
            then: *sleep_mode-turn_off
            else: *sleep_mode-turn_on
        - lambda: |-
            // Set dimming values
            id(display_brightness).publish_state(id(display_brightness_global));
            id(display_dim_brightness).publish_state(id(display_dim_brightness_global));
            id(disp1).send_command_printf("brightness=%i", id(display_brightness_global));
            id(disp1).send_command_printf("settings.brightslider.val=%i", id(display_brightness_global));
            id(disp1).send_command_printf("brightness_dim=%i", id(display_dim_brightness_global));
            id(disp1).send_command_printf("settings.dimslider.val=%i", id(display_dim_brightness_global));

            id(nextion_init).publish_state(true);
            auto ha_event = new esphome::api::CustomAPIDevice();
            ha_event->fire_homeassistant_event("esphome.nspanel_ha_blueprint",
              {
                {"type", "boot"},
                {"step", "nextion_init"}
              });
            id(home_relay1_icon) = "\uE3A5";
            id(home_relay1_icon) = "\uE3A8";
        - *notification_clear
        - switch.turn_off: notification_unread
        - logger.log: "Nextion start - Done!"

### Script for page_timer
script:
  - id: page_timer
    mode: restart
    then:
      - lambda: ESP_LOGV("script.page_timer", "start page-timer delay %i", delay);
      - delay: !lambda return int(id(page_timeout).state *1000);
      - lambda: |-
          if (id(current_page).state == "home" or id(current_page).state == "screensaver" or id(current_page).state == "boot" or int(id(page_timeout).state) == 0)
            ESP_LOGD("script.page_timer", "no page-jump");
          else
            {
              ESP_LOGD("script.page_timer", "timer->home");
              id(disp1).send_command_printf("page 0");
            }

  - id: set_climate
    mode: restart
    parameters:
      current_temp: float
      target_temp: float
      temp_step: int
      total_steps: int
      temp_offset: int
      climate_icon: string
      embedded_climate: bool
    then:
      - lambda: ESP_LOGV("script.set_climate", "Starting");
      - if:
          condition:
            - text_sensor.state: # Is climate page visible?
                id: current_page
                state: 'climate'
          then:
            - lambda: |-
                ESP_LOGV("script.set_climate", "climateslider.maxval=%i", total_steps);
                ESP_LOGV("script.set_climate", "temp_offset=%i", temp_offset);
                ESP_LOGV("script.set_climate", "temp_step=%i", temp_step);
                ESP_LOGV("script.set_climate", "current_temp=%f", current_temp);
                ESP_LOGV("script.set_climate", "target_temp=%f", target_temp);
                ESP_LOGV("script.set_climate", "target_icon=%s", climate_icon.c_str());
                ESP_LOGV("script.set_climate", "embedded=%i", (embedded_climate) ? 1 : 0);
                id(addon_climate_set_climate).execute(embedded_climate);
                id(disp1).send_command_printf("climateslider.maxval=%i", total_steps);
                id(disp1).set_component_value("temp_offset", temp_offset);
                id(disp1).set_component_value("temp_step", temp_step);
                id(disp1).set_component_text_printf("current_temp", "%.1f°", current_temp);
                id(disp1).show_component("current_temp");
                id(disp1).show_component("current_icon");
                if (target_temp > -999)
                  {
                    float slider_val = round(((10*target_temp) - temp_offset) / temp_step);
                    ESP_LOGV("script.set_climate", "climateslider=%f", slider_val);
                    id(disp1).set_component_value("climateslider", slider_val);
                    id(disp1).set_component_text_printf("target_temp", "%.1f°", target_temp);
                    id(disp1).set_component_text_printf("target_icon", "%s", climate_icon.c_str());
                    id(disp1).show_component("target_icon");
                    id(disp1).show_component("target_temp");
                    id(disp1).show_component("climateslider");
                    id(disp1).show_component("decrease_temp");
                    id(disp1).show_component("increase_temp");
                  }
                else
                  {
                    id(disp1).hide_component("target_icon");
                    id(disp1).hide_component("target_temp");
                    id(disp1).hide_component("climateslider");
                    id(disp1).hide_component("decrease_temp");
                    id(disp1).hide_component("increase_temp");
                  }
                id(disp1).set_component_value("embedded", (embedded_climate) ? 1 : 0);
      - lambda: ESP_LOGV("script.set_climate", "Finished");

  - id: refresh_datetime
    mode: restart
    then:
      - lambda: |-
          ESP_LOGV("script.refresh_datetime", "Starting");
          std::string time_format_str = id(mui_time_format);
          if (time_format_str.find("%p") != std::string::npos)
            {
              std::string meridiem_text = id(time_provider).now().strftime("%p");
              id(disp1).set_component_text_printf("home.meridiem", "%s", meridiem_text.c_str());
            }
          else { id(disp1).set_component_text_printf("home.meridiem", " "); }
          if (time_format_str.find("%-H") != std::string::npos) { time_format_str = time_format_str.replace(time_format_str.find("%-H"), sizeof("%-H")-1, to_string((int)(id(time_provider).now().hour))); }
          if (time_format_str.find("%-I") != std::string::npos)
            {
              if (id(time_provider).now().hour>12)
                {
                  time_format_str = time_format_str.replace(time_format_str.find("%-I"), sizeof("%-I")-1, to_string((int)(id(time_provider).now().hour-12)));
                }
              else if (id(time_provider).now().hour==0)
                {
                  time_format_str = time_format_str.replace(time_format_str.find("%-I"), sizeof("%-I")-1, "12");
                }
              else
                {
                  time_format_str = time_format_str.replace(time_format_str.find("%-I"), sizeof("%-I")-1, to_string((int)(id(time_provider).now().hour)));
                }
            }
          std::string time_text = id(time_provider).now().strftime(time_format_str);
          id(disp1).set_component_text_printf("home.time", "%s", time_text.c_str());
          ESP_LOGV("script.refresh_datetime", "Finished");

  - id: refresh_relays
    mode: restart
    then:
      - lambda: |-
          ESP_LOGV("script.refresh_relays", "Starting");
          // Chips - Relays
          if (id(relay_1).state) id(disp1).set_component_text_printf("home.icon_top_01", "%s", id(home_relay1_icon).c_str());
            else id(disp1).set_component_text_printf("icon_top_01", "\uFFFF");
          if (id(relay_2).state) id(disp1).set_component_text_printf("home.icon_top_02", "%s", id(home_relay2_icon).c_str());
            else id(disp1).set_component_text_printf("home.icon_top_02", "\uFFFF");
          // Hardware buttons - Fallback mode
          if (id(relay_1).state and id(relay1_local).state) id(disp1).send_command_printf("home.left_bt_pic.val=%i", (id(relay_1).state) ? 1 : 0);
          if (id(relay_2).state and id(relay2_local).state) id(disp1).send_command_printf("home.right_bt_pic.val=%i", (id(relay_2).state) ? 1 : 0);
          ESP_LOGV("script.refresh_relays", "Finished");

  - id: refresh_wifi_icon
    mode: restart
    then:
      - lambda: ESP_LOGV("script.refresh_wifi_icon", "Starting");
      - if:
          condition:
            - binary_sensor.is_on: nextion_init
          then:
            # Update Wi-Fi icon
            - if:
                condition:
                  wifi.connected:
                then:
                  - if:
                      condition:
                        api.connected:
                      then:
                        - lambda: id(disp1).send_command_printf("api=1");
                        - lambda: id(disp1).set_component_text_printf("home.wifi_icon", "%s", "\uE5A8");
                        - lambda: id(disp1).set_component_font_color("home.wifi_icon", 33808);
                      else:
                        - lambda: id(disp1).send_command_printf("api=0");
                        - lambda: id(disp1).set_component_text_printf("home.wifi_icon", "%s", "\uF256");
                        - lambda: id(disp1).set_component_font_color("home.wifi_icon", 63488);
                else:
                  - lambda: id(disp1).send_command_printf("api=0");
                  - lambda: id(disp1).set_component_text_printf("home.wifi_icon", "%s", "\uE5A9");
                  - lambda: id(disp1).set_component_font_color("home.wifi_icon", 63488);
      - lambda: ESP_LOGV("script.refresh_wifi_icon", "Finished");

  - id: update_page_home
    mode: restart
    then:
      - lambda: ESP_LOGV("script.update_page_home", "Starting");
      - if:
          condition:
            - text_sensor.state: # Is home page visible?
                id: current_page
                state: 'home'
          then:
            - script.execute: refresh_relays
            - script.execute: refresh_wifi_icon
            - lambda: |-
                ESP_LOGV("script.update_page_home", "is_notification=%i", (id(notification_text).state.empty() and id(notification_label).state.empty()) ? 0 : 1);
                id(disp1).send_command_printf("is_notification=%i", (id(notification_text).state.empty() and id(notification_label).state.empty()) ? 0 : 1);
                id(set_component_color).execute("home.bt_notific", id(notification_unread).state ? id(home_notify_icon_color_unread) : id(home_notify_icon_color_normal), {});
            - script.execute: refresh_datetime
            - script.execute: addon_climate_update_page_home

      - lambda: ESP_LOGV("script.update_page_home", "Finished");

  - id: service_call_alarm_control_panel
    mode: restart
    parameters:
      entity: string
      key: string
      code_format: string
      pin: string
    then:
      - lambda: |-
          ESP_LOGV("service_call_alarm_control_panel", "ESPHome remote service call");
          ESP_LOGV("service_call_alarm_control_panel", "entity=%s", entity.c_str());
          ESP_LOGV("service_call_alarm_control_panel", "key=%s", key.c_str());
          ESP_LOGV("service_call_alarm_control_panel", "code_format=%s", code_format.c_str());
          ESP_LOGV("service_call_alarm_control_panel", "pin=%s", entity.c_str());
          std::string service = "";
          if (key=="home") service = "alarm_control_panel.alarm_arm_home";
          else if (key=="away") service = "alarm_control_panel.alarm_arm_away";
          else if (key=="night") service = "alarm_control_panel.alarm_arm_night";
          else if (key=="vacation") service = "alarm_control_panel.alarm_arm_vacation";
          else if (key=="bypass") service = "alarm_control_panel.alarm_arm_custom_bypass";
          else if (key=="disarm") service = "alarm_control_panel.alarm_disarm";
          ESP_LOGV("service_call_alarm_control_panel", "service=%s", service.c_str());
          if (service != "" and not service.empty())
            {
              ESP_LOGV("service_call_alarm_control_panel", "ESPHome remote service call");
              HomeassistantServiceResponse resp;
              HomeassistantServiceMap resp_kv;
              resp.service = service.c_str();
              resp_kv.key = "entity_id";
              resp_kv.value = entity.c_str();
              resp.data.push_back(resp_kv);
              if (pin != "" and not pin.empty())
                {
                  resp_kv.key = "code";
                  resp_kv.value = pin.c_str();
                  resp.data.push_back(resp_kv);
                }
              id(api_server).send_homeassistant_service_call(resp);
            }

  - id: service_call_climate
    mode: restart
    parameters:
      entity: string
      key: string
      value: string
      embedded: bool
    then:
      - lambda: |-
          if (embedded)
            id(addon_climate_service_call)->execute(key.c_str(), value.c_str());
          else if (key == "set_temperature")
            id(ha_call_service)->execute("climate.set_temperature", "temperature", to_string(stof(value) / 10), entity.c_str());
          else if (key == "hvac_mode")
            id(ha_call_service)->execute("climate.set_hvac_mode", key.c_str(), value.c_str(), entity.c_str());

  - id: ha_call_service
    mode: restart
    parameters:
      service: string
      key: string
      value: string
      entity: string
    then:
      - lambda: |-
          if (service != "" and not service.empty())
            {
              auto ha_event = new esphome::api::CustomAPIDevice();
              ha_event->fire_homeassistant_event("esphome.nspanel_ha_blueprint",
                {
                  {"type", "service_call"},
                  {"service", service},
                  {"entity", entity},
                  {"key", key},
                  {"value", value}
                });
            }

  - id: ha_button
    mode: parallel
    parameters:
      page: string
      component: string
      command: string
    then:
      - lambda: |-
          ESP_LOGV("script.ha_button", "Starting");
          ESP_LOGV("script.ha_button", "page: %s", page.c_str());
          ESP_LOGV("script.ha_button", "component: %s", component.c_str());
          ESP_LOGV("script.ha_button", "command: %s", command.c_str());
          auto ha_event = new esphome::api::CustomAPIDevice();
          ha_event->fire_homeassistant_event("esphome.nspanel_ha_blueprint",
            {
              {"type", "button_click"},
              {"page", page},
              {"component", component},
              {"command", command}
            });
          ESP_LOGV("script.ha_button", "Finished");

  - id: update_alarm_icon
    mode: restart
    parameters:
      component: string
      state: string
    then:
      - lambda: |-
          ESP_LOGV("script.update_alarm_icon", "Starting");
          std::string alarm_icon = "\uEECC"; //mdi:shield-alert-outline
          int alarm_color = 65535;
          // Standard colors:
          // blue: '1055' # rgb(0, 128, 248)
          // grey_dark: '10597' # rgb(40, 44, 40)
          // grey_light: '33808' # rgb(128, 128, 128)
          // grey_super_light: '52857' # rgb(200, 204, 200)
          // grey_white: '59164' # rgb(225, 225, 225)
          // red: '63488' # rgb(248, 0, 0)
          // white: '65535' # rgb(255, 255, 255)
          // yellow: '65472' # rgb(248, 248, 0)
          // #### Colors from HA Style:
          // green: '19818' # rgb(76, 175, 80)
          // orange: '64704' # rgb(255, 152, 0)
          // cyan: '1530' # rgb(0, 188, 212)
          // deep-orange: '64164' # rgb(255, 87, 34)
          // amber: '65024' # rgb(255, 193, 7)
          // "off": '35921' #8a8a8a
          // disabled: '48631' # rgb(189, 189, 189)
          if (state == "disarmed")
            {
              alarm_icon = "\uE99B"; //mdi:shield-off-outline
              alarm_color = 65535;
            }
          else if (state == "armed_home")
            {
              alarm_icon = "\uECCA"; //mdi:shield-home-outline
              alarm_color = 19818;
            }
          else if (state == "armed_away")
            {
              alarm_icon = "\uECCB"; //mdi:shield-lock-outline
              alarm_color = 19818;
            }
          else if (state == "armed_night")
            {
              alarm_icon = "\uF828"; //mdi:shield-moon-outline
              alarm_color = 19818;
            }
          else if (state == "armed_vacation")
            {
              alarm_icon = "\uECC6"; //mdi:shield-airplane-outline
              alarm_color = 19818;
            }
          else if (state == "armed_custom_bypass")
            {
              alarm_icon = "\uE77F"; //mdi:shield-half-full
              alarm_color = 19818;
            }
          else if (state == "pending" or state == "arming")
            {
              alarm_icon = "\uE498"; //mdi:shield-outline
              alarm_color = 65024;
            }
          else if (state == "disarming")
            {
              alarm_icon = "\uE99B"; //mdi:shield-off-outline
              alarm_color = 65024;
            }
          else if (state == "triggered")
            {
              alarm_icon = "\uEECC"; //mdi:shield-alert-outline
              alarm_color = 63488;
            }
          id(disp1).set_component_text_printf(component.c_str(), alarm_icon.c_str());
          id(disp1).set_component_font_color(component.c_str(), alarm_color);
          ESP_LOGV("script.update_alarm_icon", "Finished");

  - id: update_climate_icon
    mode: restart
    parameters:
      component: string
      action: int
      mode: int
    then:
      - lambda: |-
          ESP_LOGV("script.update_climate_icon", "Starting");
          ESP_LOGV("script.update_climate_icon", "component: %s", component.c_str());
          ESP_LOGV("script.update_climate_icon", "action: %i", action);
          ESP_LOGV("script.update_climate_icon", "mode: %i", mode);
          switch (action) // CLIMATE_ACTION_OFF = 0, CLIMATE_ACTION_COOLING = 2, CLIMATE_ACTION_HEATING = 3, CLIMATE_ACTION_IDLE = 4, CLIMATE_ACTION_DRYING = 5, CLIMATE_ACTION_FAN = 6
            {
              case 0: //CLIMATE_ACTION_OFF
                ESP_LOGV("script.update_climate_icon", "Climate 'action' is off. Using 'mode' instead");
                switch (mode) // CLIMATE_MODE_OFF = 0, CLIMATE_MODE_HEAT_COOL = 1, CLIMATE_MODE_COOL = 2, CLIMATE_MODE_HEAT = 3, CLIMATE_MODE_FAN_ONLY = 4, CLIMATE_MODE_DRY = 5, CLIMATE_MODE_AUTO = 6
                  {
                    case 0: //CLIMATE_MODE_OFF
                      ESP_LOGV("script.update_climate_icon", "Icon: none");
                      id(disp1).set_component_text_printf(component.c_str(), "%s", "\uFFFF"); // (E424) Don't show icon when off
                      id(disp1).set_component_font_color(component.c_str(), 35921); // grey (off)
                      break;
                    case 1: //CLIMATE_MODE_HEAT_COOL
                      ESP_LOGV("script.update_climate_icon", "Icon: autorenew");
                      id(disp1).set_component_text_printf(component.c_str(), "%s", "\uE069"); // mdi:autorenew
                      id(disp1).set_component_font_color(component.c_str(), 35921); // grey (off)
                      break;
                    case 2: //CLIMATE_MODE_COOL
                      ESP_LOGV("script.update_climate_icon", "Icon: snowflake");
                      id(disp1).set_component_text_printf(component.c_str(), "%s", "\uE716"); // mdi:snowflake
                      id(disp1).set_component_font_color(component.c_str(), 35921); // grey (off)
                      break;
                    case 3: //CLIMATE_MODE_HEAT
                      ESP_LOGV("script.update_climate_icon", "Icon: fire");
                      id(disp1).set_component_text_printf(component.c_str(), "%s", "\uE237"); // mdi:fire
                      id(disp1).set_component_font_color(component.c_str(), 35921); // grey (off)
                      break;
                    case 4: //CLIMATE_MODE_FAN_ONLY
                      ESP_LOGV("script.update_climate_icon", "Icon: fan");
                      id(disp1).set_component_text_printf(component.c_str(), "%s", "\uE20F"); // mdi:fan
                      id(disp1).set_component_font_color(component.c_str(), 35921); // grey (off)
                      break;
                    case 5: //CLIMATE_MODE_DRY
                      ESP_LOGV("script.update_climate_icon", "Icon: water-percent");
                      id(disp1).set_component_text_printf(component.c_str(), "%s", "\uE58D"); // mdi:water-percent
                      id(disp1).set_component_font_color(component.c_str(), 35921); // grey (off)
                      break;
                    case 6: //CLIMATE_MODE_AUTO
                      ESP_LOGV("script.update_climate_icon", "Icon: calendar-sync");
                      id(disp1).set_component_text_printf(component.c_str(), "%s", "\uEE8D"); // mdi:calendar-sync
                      id(disp1).set_component_font_color(component.c_str(), 35921); // grey (off)
                      break;
                  }
                  break;
              case 2: //CLIMATE_ACTION_COOLING
                ESP_LOGV("script.update_climate_icon", "Icon: snowflake");
                id(disp1).set_component_text_printf(component.c_str(), "%s", "\uE716"); // mdi:snowflake
                id(disp1).set_component_font_color(component.c_str(), 1055); // blue
                break;
              case 3: //CLIMATE_ACTION_HEATING
                ESP_LOGV("script.update_climate_icon", "Icon: fire");
                id(disp1).set_component_text_printf(component.c_str(), "%s", "\uE237"); // mdi:fire
                id(disp1).set_component_font_color(component.c_str(), 64164); // deep-orange
                break;
              case 4: //CLIMATE_ACTION_IDLE
                ESP_LOGV("script.update_climate_icon", "Icon: thermometer");
                id(disp1).set_component_text_printf(component.c_str(), "%s", "\uE50E"); // mdi:thermometer
                id(disp1).set_component_font_color(component.c_str(), 35921); // grey (off)
                break;
              case 5: //CLIMATE_ACTION_DRYING
                ESP_LOGV("script.update_climate_icon", "Icon: water-percent");
                id(disp1).set_component_text_printf(component.c_str(), "%s", "\uE58D"); // mdi:water-percent
                id(disp1).set_component_font_color(component.c_str(), 64704); // orange
                break;
              case 6: //CLIMATE_ACTION_FAN
                ESP_LOGV("script.update_climate_icon", "Icon: fan");
                id(disp1).set_component_text_printf(component.c_str(), "%s", "\uE20F"); // mdi:fan
                id(disp1).set_component_font_color(component.c_str(), 1530); // cyan
                break;
            }
          ESP_LOGV("script.update_climate_icon", "Finished");

  - id: set_component_color
    mode: queued
    parameters:
      component: string
      foreground: int[]
      background: int[]
    then:
      - lambda: |-
          ESP_LOGV("script.set_component_color", "Starting");
          ESP_LOGV("script.set_component_color", "Component: %s", component.c_str());
          int fg565 = -1;
          int bg565 = -1;

          // Foreground
          if (foreground.size() == 3) fg565 = ((foreground[0] & 0b11111000) << 8) | ((foreground[1] & 0b11111100) << 3) | (foreground[2] >> 3);
          else if (foreground.size() == 1) fg565 = foreground[0];
          if (fg565 >= 0) id(disp1).set_component_font_color(component.c_str(), fg565);

          // Background
          if (background.size() == 3) bg565 = ((background[0] & 0b11111000) << 8) | ((background[1] & 0b11111100) << 3) | (background[2] >> 3);
          else if (background.size() == 1) bg565 = background[0];
          if (bg565 >= 0) id(disp1).set_component_background_color(component.c_str(), bg565);

          ESP_LOGV("script.set_component_color", "Finished");

  - id: display_wrapped_text
    mode: queued
    parameters:
      component: string
      text: string
      line_length_limit: int
    then:
      - lambda: |-
          int startPos = 0;
          int endPos = 0;
          std::string wrappedText = "";
          while (startPos < text.length()) {
            while (text[startPos] == ' ' and startPos < text.length()) { startPos++; }
            int endPos = startPos + line_length_limit;
            if (endPos >= text.length()) endPos = text.length();
            else
              {
                while (endPos > startPos && text[endPos] != ' ') { endPos--; }
                if (endPos == startPos) endPos = startPos + line_length_limit; // Handle case of long word
              }
            wrappedText += text.substr(startPos, endPos-startPos);
            if (endPos < text.length())
              {
                while (text[endPos] == ' ') { endPos--; }
                if (endPos >= startPos) wrappedText += "\\r";
              }
            startPos = endPos + 1; // Skip the space
            while (text[startPos] == ' ' and startPos < text.length()) { startPos++; }
          }
          ESP_LOGV("script.display_wrapped_text", "text (new): %s", wrappedText.c_str());
          id(disp1).set_component_text_printf(component.c_str(), "%s", wrappedText.c_str());

  - id: display_embedded_temp
    mode: restart
    then:
      - if:
          condition:
            - or:
                - lambda: return id(embedded_indoor_temp);
                - not:
                    - api.connected:
                - not:
                    - wifi.connected:
          then:
            - lambda: |-
                if (id(temp_unit_fahrenheit)) id(disp1).set_component_text_printf("home.current_temp", "%.0f°F", ((id(temp_nspanel).state * 9.0 / 5.0) + 32.0)); // °F = (°C × 9/5) + 32
                else id(disp1).set_component_text_printf("home.current_temp", "%.1f°C", id(temp_nspanel).state);

  - id: check_versions
    mode: restart
    then:
      - delay: 60s
      - lambda: |-
          ESP_LOGD("script.check_versions", "ESPHome version: ${version}");
          ESP_LOGD("script.check_versions", "TFT version: %s", id(version_tft).c_str());
          if (id(version_tft) != "${version}") ESP_LOGE("script.check_versions", "TFT version mismatch!");
          ESP_LOGD("script.check_versions", "Blueprint version: %s", id(version_blueprint).c_str());
          if (id(version_blueprint) != "${version}") ESP_LOGE("script.check_versions", "Blueprint version mismatch!");
          auto ha_event = new esphome::api::CustomAPIDevice();
          ha_event->fire_homeassistant_event("esphome.nspanel_ha_blueprint",
            {
              {"type", "version"},
              {"tft", id(version_tft).c_str()},
              {"esphome", "${version}"},
              {"blueprint", id(version_blueprint).c_str()}
            });

  #####  ADD-ONS ############################################################
  ##### Add-on - Climate #####
  - id: addon_climate_service_call
    mode: restart
    parameters:
      key: string
      value: string
    then:
      # Reserved for Add-on Climate
      - lambda: |-
          ESP_LOGV("script.addon_climate_service_call", "Check for addon_climate");
  - id: addon_climate_update_page_home
    mode: restart
    then:
      # Reserved for Add-on Climate
      - lambda: |-
          ESP_LOGV("script.addon_climate_update_page_home", "Check for addon_climate");
  - id: addon_climate_set_climate
    mode: restart
    parameters:
      embedded_climate: bool
    then:
      # Reserved for Add-on Climate
      - lambda: |-
          ESP_LOGV("script.addon_climate_set_climate", "Check for addon_climate");
          ESP_LOGV("script.addon_climate_set_climate", "embedded_climate: %i", (embedded_climate) ? 1 : 0);
  - id: addon_climate_update_page_climate
    mode: restart
    then:
      # Reserved for Add-on Climate
      - lambda: |-
          ESP_LOGV("script.addon_climate_update_page_climate", "Check for addon_climate");
  - id: addon_climate_set_climate_friendly_name
    mode: restart
    parameters:
      friendly_name: string
    then:
      # Reserved for Add-on Climate
      - lambda: |-
          ESP_LOGV("script.addon_climate_set_climate_friendly_name", "Check for addon_climate");
          ESP_LOGV("script.addon_climate_set_climate_friendly_name", "friendly_name: %s", friendly_name.c_str());