#####################################################################################################
##### NSPANEL ESPHOME created by Blackymas - https://github.com/Blackymas/NSPanel_HA_Blueprint  #####
##### ADVANCED CONFIG + FULL ESPHOME CODE!                                                      #####
##### PLEASE only make changes if it is necessary and also the required knowledge is available. #####
##### For normal use with the Blueprint, no changes are necessary.                              #####
#####################################################################################################

substitutions:

  ################## Defaults ##################
  # Just in case user forgets to set something #
  ##############################################

  ##### DON'T CHANGE THIS #####
  version: "4.1dev5"
  #############################

##### ESPHOME CONFIGURATION #####
esphome:
  name: ${device_name}
  min_version: 2023.5.0
  platformio_options:
    build_flags:
      - -Wno-missing-field-initializers
  on_boot:
    priority: 200.0
    then:
      - logger.log: After boot check-up
      - wait_until:
          condition:
            - api.connected:
          timeout: 60s
      - wait_until:
          condition:
            - lambda: !lambda return disp1->is_setup();
          timeout: 20s
      - script.execute: exit_reparse
      - wait_until:
          condition:
            - lambda: !lambda return disp1->is_setup();
          timeout: 20s
      - lambda: |-
          static const char *const TAG = "on_boot";
          if (not disp1->is_setup()) {
            ESP_LOGE(TAG, "No response from Nextion display");
            ESP_LOGD(TAG, "Turn off Nextion");
            screen_power->turn_off();
            delay(1500);
            ESP_LOGD(TAG, "Turn on Nextion");
            screen_power->turn_on();
          }

##### TYPE OF ESP BOARD #####
esp32:
  board: esp32dev

##### WIFI SETUP #####
wifi:
  networks:
    - id: wifi_default
      ssid: ${wifi_ssid}
      password: ${wifi_password}
  ap:
    ssid: "${device_name}"
    password: ${wifi_password}

##### WEB SERVER SETUP - Required for json parsing and tft upload #####
web_server:
  id: web_server_std
  port: 80
  auth:
    username: admin
    password: ${wifi_password}

##### OTA PASSWORD #####
ota:
  id: ota_std
  password: ${wifi_password}
  safe_mode: true
  reboot_timeout: 3min
  num_attempts: 3

##### LOGGER #####
logger:
  id: logger_std

##### ENABLE RINGTONE MUSIC SUPPORT #####
rtttl:
  id: buzzer
  output: buzzer_out

##### CONFIGURE INTERNAL BUZZER #####
output:
  ##### BUZZER FOR PLAYING RINGTONES #####
  - platform: ledc
    id: buzzer_out
    pin:
      number: 21

##### UART FOR NEXTION DISPLAY #####
uart:
  - id: tf_uart
    tx_pin: 16
    rx_pin: 17
    baud_rate: 115200

##### Keeps time display updated #####
time:
  - id: time_provider
    platform: homeassistant
    on_time:
      - seconds: 0
        then:
          - script.execute:
              id: refresh_datetime
    on_time_sync:
      then:
        - logger.log: "System clock synchronized"
        - script.execute:
            id: refresh_datetime

##### START - API CONFIGURATION #####
api:
  id: api_server
  reboot_timeout: 0s
  services:
      #### Service to populate the alarm settings page #####
      - service: alarm_settings
        variables:
          page_title: string
          state: string
          supported_features: int
          code_format: string
          code_arm_required: bool
          entity: string
          mui_alarm: string[] #std::vector<std::string> #std::map
        then:
          - lambda: |-
              // set alarm icon on home page
              disp1->send_command_printf("is_alarm=%i", (state == "" or state.empty()) ? 0 : 1);
              update_alarm_icon->execute("home.bt_alarm", state.c_str());

              // Is page Alarm visible?
              if (current_page->state == "alarm") // To do: This page constructor should be moved to Blueprint
                { // Update alarm page
                    id(entity_id) = entity;

                    // Alarm page - Header
                    update_alarm_icon->execute("icon_state", state.c_str());
                    disp1->set_component_text_printf("page_label", "%s", page_title.c_str());
                    disp1->set_component_text_printf("code_format", "%s", code_format.c_str());
                    if (code_arm_required) disp1->set_component_text_printf("code_arm_req", "1"); else disp1->set_component_text_printf("code_arm_req", "0");

                    // Alarm page - Button's icons
                    disp1->set_component_text_printf("bt_home_icon", "\uE689"); //mdi:shield-home
                    disp1->set_component_text_printf("bt_away_icon", "\uE99C"); //mdi:shield-lock
                    disp1->set_component_text_printf("bt_night_icon", "\uF827"); //mdi:shield-moon
                    disp1->set_component_text_printf("bt_vacat_icon", "\uE6BA"); //mdi:shield-airplane
                    disp1->set_component_text_printf("bt_bypass_icon", "\uE77F"); //mdi:shield-half-full
                    disp1->set_component_text_printf("bt_disarm_icon", "\uE99D"); //mdi:shield-off

                    // Alarm page - Button's text
                    display_wrapped_text->execute("bt_home_text", mui_alarm[0].c_str(), 10);
                    display_wrapped_text->execute("bt_away_text", mui_alarm[1].c_str(), 10);
                    display_wrapped_text->execute("bt_night_text", mui_alarm[2].c_str(), 10);
                    display_wrapped_text->execute("bt_vacat_text", mui_alarm[3].c_str(), 10);
                    display_wrapped_text->execute("bt_bypass_text", mui_alarm[4].c_str(), 10);
                    display_wrapped_text->execute("bt_disarm_text", mui_alarm[5].c_str(), 10);

                    // Alarm page - Buttons
                    if (supported_features & 1) // Alarm - Button - Home
                      {
                        disp1->send_command_printf("bt_home_pic.pic=%i", (state == "armed_home") ? 43 : 42);
                        disp1->set_component_background_color("bt_home_text", (state == "armed_home") ? 19818 : 52857);
                        disp1->set_component_background_color("bt_home_icon", (state == "armed_home") ? 19818 : 52857);
                        disp1->set_component_font_color("bt_home_text", (state == "armed_home") ? 65535 : 0);
                        disp1->set_component_font_color("bt_home_icon", (state == "armed_home") ? 65535 : 0);
                        if (state == "armed_home") disp1->hide_component("bt_home"); else disp1->show_component("bt_home");
                      }
                    if (supported_features & 2) // Alarm - Button - Away
                      {
                        disp1->send_command_printf("bt_away_pic.pic=%i", (state == "armed_away") ? 43 : 42);
                        disp1->set_component_background_color("bt_away_text", (state == "armed_away") ? 19818 : 52857);
                        disp1->set_component_background_color("bt_away_icon", (state == "armed_away") ? 19818 : 52857);
                        disp1->set_component_font_color("bt_away_text", (state == "armed_away") ? 65535 : 0);
                        disp1->set_component_font_color("bt_away_icon", (state == "armed_away") ? 65535 : 0);
                        if (state == "armed_away") disp1->hide_component("bt_away"); else disp1->show_component("bt_away");
                      }
                    if (supported_features & 4) // Alarm - Button - Night
                      {
                        disp1->send_command_printf("bt_night_pic.pic=%i", (state == "armed_night") ? 43 : 42);
                        disp1->set_component_background_color("bt_night_text", (state == "armed_night") ? 19818 : 52857);
                        disp1->set_component_background_color("bt_night_icon", (state == "armed_night") ? 19818 : 52857);
                        disp1->set_component_font_color("bt_night_text", (state == "armed_night") ? 65535 : 0);
                        disp1->set_component_font_color("bt_night_icon", (state == "armed_night") ? 65535 : 0);
                        if (state == "armed_night") disp1->hide_component("bt_night"); else disp1->show_component("bt_night");
                      }
                    if (supported_features & 32) // Alarm - Button - Vacation
                      {
                        disp1->send_command_printf("bt_vacat_pic.pic=%i", (state == "armed_vacation") ? 43 : 42);
                        disp1->set_component_background_color("bt_vacat_text", (state == "armed_vacation") ? 19818 : 52857);
                        disp1->set_component_background_color("bt_vacat_icon", (state == "armed_vacation") ? 19818 : 52857);
                        disp1->set_component_font_color("bt_vacat_text", (state == "armed_vacation") ? 65535 : 0);
                        disp1->set_component_font_color("bt_vacat_icon", (state == "armed_vacation") ? 65535 : 0);
                        if (state == "armed_vacation") disp1->hide_component("bt_vacat"); else disp1->show_component("bt_vacat");
                      }
                    if (supported_features & 16) // Alarm - Button - Custom bypass
                      {
                        disp1->send_command_printf("bt_bypass_pic.pic=%i", (state == "armed_bypass") ? 43 : 42);
                        disp1->set_component_background_color("bt_bypass_text", (state == "armed_bypass") ? 19818 : 52857);
                        disp1->set_component_background_color("bt_bypass_icon", (state == "armed_bypass") ? 19818 : 52857);
                        disp1->set_component_font_color("bt_bypass_text", (state == "armed_bypass") ? 65535 : 0);
                        disp1->set_component_font_color("bt_bypass_icon", (state == "armed_bypass") ? 65535 : 0);
                        if (state == "armed_bypass") disp1->hide_component("bt_bypass"); else disp1->show_component("bt_bypass");
                      }
                    if ( true ) // Alarm - Button - Disarm
                      {
                        disp1->send_command_printf("bt_disarm_pic.pic=%i", (state == "disarmed") ? 43 : 42);
                        disp1->set_component_background_color("bt_disarm_text", (state == "disarmed") ? 19818 : 52857);
                        disp1->set_component_background_color("bt_disarm_icon", (state == "disarmed") ? 19818 : 52857);
                        disp1->set_component_font_color("bt_disarm_text", (state == "disarmed") ? 65535 : 0);
                        disp1->set_component_font_color("bt_disarm_icon", (state == "disarmed") ? 65535 : 0);
                        if (state == "disarmed") disp1->hide_component("bt_disarm"); else disp1->show_component("bt_disarm");
                      }
                }

      ##### Service for transferring global settings from the blueprint to ESPHome #####
      - service: global_settings
        variables:
          blueprint_version: string
          relay1_local_control: bool
          relay1_icon: string
          relay1_icon_color: int
          relay1_fallback: bool
          relay2_local_control: bool
          relay2_icon: string
          relay2_icon_color: int
          relay2_fallback: bool
          date_color: int
          time_format: string
          time_color: int
          embedded_climate: bool
          embedded_climate_friendly_name: string
          embedded_indoor_temperature: bool
          temperature_unit_is_fahrenheit: bool
          mui_please_confirm: string
        then:
          - lambda: |-
              // Blueprint version
              ESP_LOGV("service.global_settings", "Check Blueprint version");
              id(version_blueprint) = blueprint_version;
              check_versions->execute();

              // Relays
              ESP_LOGV("service.global_settings", "Setup relays");
              relay1_local->publish_state(relay1_local_control);
              relay2_local->publish_state(relay2_local_control);
              id(home_relay1_icon) = relay1_icon.c_str();
              id(home_relay2_icon) = relay2_icon.c_str();
              id(home_relay1_icon_color) = relay1_icon_color;
              id(home_relay2_icon_color) = relay2_icon_color;
              id(relay_1_fallback) = relay1_fallback;
              id(relay_2_fallback) = relay2_fallback;

              // Localization
              ESP_LOGV("service.global_settings", "Load localization");
              id(mui_time_format) = time_format;

              // Date/Time colors
              ESP_LOGV("service.global_settings", "Load date/time colors");
              id(home_date_color) = date_color;
              id(home_time_color) = time_color;

              // Embedded thermostat
              ESP_LOGV("service.global_settings", "Load embedded thermostat");
              id(is_embedded_thermostat) = embedded_climate;
              addon_climate_set_climate_friendly_name->execute(embedded_climate_friendly_name.c_str());

              // Indoor temperature
              ESP_LOGV("service.global_settings", "Set indoor temperature");
              id(embedded_indoor_temp) = embedded_indoor_temperature;
              id(temp_unit_fahrenheit) = temperature_unit_is_fahrenheit;
              display_embedded_temp->execute();

              // Confirm page
              ESP_LOGV("service.global_settings", "Setup confirm page");
              display_wrapped_text->execute("confirm.title", mui_please_confirm.c_str(), 15);

              // Refresh colors of global components
              ESP_LOGV("service.global_settings", "Refresh color of global components");
              disp1->set_component_font_color("home.date", id(home_date_color));
              disp1->set_component_font_color("home.time", id(home_time_color));
              disp1->set_component_font_color("home.icon_top_01", id(home_relay1_icon_color));
              disp1->set_component_font_color("home.icon_top_02", id(home_relay2_icon_color));

              // Update home page
              ESP_LOGV("service.global_settings", "Update home page");
              page_home->execute(false);

              ESP_LOGV("service.global_settings", "Current page: %s", current_page->state.c_str());

          - if:
              condition:
                - text_sensor.state: # Is boot page visible?
                    id: current_page
                    state: boot
              then:
                - lambda: |-
                    ESP_LOGV("service.global_settings", "Boot page is visible");
                    disp1->set_component_text_printf("boot.bluep_version", "%s", blueprint_version.c_str());
                - wait_until:
                    condition:
                      - not:
                        - text_sensor.state: # Is boot page visible?
                            id: current_page
                            state: 'boot'
                    timeout: 2s
                - if:
                    condition:
                      - text_sensor.state: # Avoid this being called twice by multiple boot triggers
                          id: current_page
                          state: 'boot'
                    then:
                      - lambda: |-
                          ESP_LOGV("service.global_settings", "Boot page still visible");
                      - if:
                          condition:
                            switch.is_on: notification_sound
                          then:
                            - rtttl.play:
                                rtttl: 'two short:d=4,o=5,b=100:16e6,16e6'
                      - lambda: |-
                          ESP_LOGD("service.global_settings", "Jump to wake-up page: %s", wakeup_page_name->state.c_str());
                          disp1->goto_page(wakeup_page_name->state.c_str());
                          timer_reset_all->execute(wakeup_page_name->state.c_str());

      ##### Service to send a command "printf" directly to the display #####
      - service: send_command_printf
        variables:
          cmd: string
        then:
          - lambda: 'disp1->send_command_printf("%s", cmd.c_str());'

      ##### Service to send a command "text_printf" directly to the display #####
      - service: send_command_text_printf
        variables:
          component: string
          message: string
        then:
          - lambda: 'disp1->set_component_text_printf(component.c_str(), "%s", message.c_str());'

      ##### Service to send a command "component_value (Dualstate Button)" directly to the display #####
      - service: send_command_value
        variables:
          component: string
          message: int
        then:
          - lambda: 'disp1->set_component_value(component.c_str(), message);'

      ##### Service to send a command "hide componente" directly to the display #####
      - service: send_command_hide ### unused ###
        variables:
          component: string
        then:
          - lambda: 'disp1->hide_component(component.c_str());'

      ##### Service to send a command "show componente" directly to the display #####
      - service: send_command_show ### unused ###
        variables:
          component: string
        then:
          - lambda: 'disp1->show_component(component.c_str());'

      ##### Service to send a command "show ALL componente" directly to the display #####
      - service: send_command_show_all ### unused ###
        then:
          - lambda: disp1->show_component("255");

      ##### Service to send a command "font color" directly to the display #####
      - service: set_component_color
        variables:
          component: string
          foreground: int[]
          background: int[]
        then:
          - lambda: set_component_color->execute(component, foreground, background);

      ##### Service to show a notification-message on the screen #####
      - service: notification_show
        variables:
          label: string
          text: string
        then:
          - lambda: |-
              ESP_LOGV("service.notification_show", "Starting");

              disp1->send_command_printf("is_notification=1");
              disp1->goto_page("notification");
              disp1->set_component_text_printf("notification.notifi_label", "%s", label.c_str());

              display_wrapped_text->execute("notification.notifi_text01", text.c_str(), id(display_mode) == 2 ? 23 : 32);

              notification_label->publish_state(label.c_str());
              notification_text->publish_state(text.c_str());
              timer_reset_all->execute(current_page->state.c_str());
              notification_unread->turn_on();
              if (notification_sound->state) buzzer->play("two short:d=4,o=5,b=100:16e6,16e6");

      ##### Service to clear the notification #####
      - service: notification_clear
        then:
          - logger.log: "Service: notification_clear"
          - script.execute: notification_clear

      ##### Service to open information for settings-page(s)
      - service: open_entity_settings_page
        variables:
          page: string
          page_label: string
          page_icon: string
          page_icon_color: int[]
          entity: string
          back_page: string
        then:
          - lambda: |-
              id(entity_id) = entity;
              std::string cmd_page = std::string("page ") + page.c_str();
              disp1->send_command_printf(cmd_page.c_str());
              disp1->set_component_text_printf("page_label", "%s", page_label.c_str());
              disp1->set_component_text_printf("back_page", "%s", back_page.c_str());
              if (page == "climate")
                {
                  if (entity == "embedded_climate") addon_climate_set_climate_friendly_name->execute(page_label.c_str());
                  disp1->set_component_value("embedded", (entity == "embedded_climate") ? 1 : 0);
                }
              else
                {
                  if ((page_icon != std::string()) and (page_icon != ""))
                    disp1->set_component_text_printf("icon_state", "%s", page_icon.c_str());
                  set_component_color->execute("icon_state", page_icon_color, {});
                }

      # Service to show a QR code on the display (ex. for WiFi password)
      - service: qrcode
        variables:
          title: string
          qrcode: string
          show: bool
        then:
          - lambda: |-
              disp1->set_component_text_printf("qrcode.qrcode_label", "%s", title.c_str());
              disp1->set_component_text_printf("qrcode.qrcode_value", "%s", qrcode.c_str());
              if (show) disp1->goto_page("qrcode");

      #### Service to set climate state ####
      - service: set_climate
        variables:
          current_temp: float
          target_temp: float
          temp_step: int
          total_steps: int
          temp_offset: int
          climate_icon: string
          embedded_climate: bool
          entity: string
        then:
          - lambda: |-
              if (current_page->state == "climate") id(entity_id) = entity;

          - script.execute:
              id: set_climate
              current_temp: !lambda "return current_temp;"
              target_temp: !lambda "return target_temp;"
              temp_step: !lambda "return temp_step;"
              total_steps: !lambda "return total_steps;"
              temp_offset: !lambda "return temp_offset;"
              climate_icon: !lambda "return climate_icon;"
              embedded_climate: !lambda "return embedded_climate;"

    #### Service to set the buttons ####
      - service: set_button
        variables:
          btn_id: string
          btn_pic: int
          btn_bg: int[]
          btn_icon_font: int[]
          btn_txt_font: int[]
          btn_bri_font: int[]
          btn_icon: string
          btn_label: string
          btn_bri_txt: string
        then:
          - lambda: |-
              std::string btnicon = btn_id.c_str() + std::string("icon");
              std::string btntext = btn_id.c_str() + std::string("text");
              std::string btnbri = btn_id.c_str() + std::string("bri");
              disp1->send_command_printf("%spic.pic=%i", btn_id.c_str(), btn_pic);
              set_component_color->execute(btnicon.c_str(), btn_icon_font, btn_bg);
              set_component_color->execute(btntext.c_str(), btn_txt_font, btn_bg);
              set_component_color->execute(btnbri.c_str(), btn_bri_font, btn_bg);
              disp1->set_component_text_printf(btnicon.c_str(), "%s", btn_icon.c_str());
              display_wrapped_text->execute(btntext.c_str(), btn_label.c_str(), 10);
              if (strcmp(btn_bri_txt.c_str(), "0") != 0)
                disp1->set_component_text_printf(btnbri.c_str(), "%s", btn_bri_txt.c_str());
              else
                disp1->set_component_text_printf(btnbri.c_str(), " ");

      ##### SERVICE TO WAKE UP THE DISPLAY #####
      - service: wake_up
        variables:
          reset_timer: bool
        then:
          - lambda: |-
              if (current_page->state == "screensaver") disp1->goto_page(wakeup_page_name->state.c_str());
              if (reset_timer)
                timer_reset_all->execute(wakeup_page_name->state.c_str());
              else {
                timer_sleep->execute(wakeup_page_name->state.c_str(), int(timeout_sleep->state));
                timer_dim->execute(wakeup_page_name->state.c_str(), int(timeout_dim->state));
              }

      #### Service to set the entities ####
      - service: set_entity
        variables:
          ent_id: string
          ent_icon: string
          ent_label: string
          ent_value: string
          ent_value_xcen: string
        then:
          - lambda: |-
              std::string enticon = ent_id.c_str() + std::string("_pic");
              std::string entlabel = ent_id.c_str() + std::string("_label");
              std::string entxcen = ent_id.c_str() + std::string(".xcen=") + ent_value_xcen.c_str();
              disp1->set_component_text_printf(enticon.c_str(), "%s", ent_icon.c_str());
              if (strcmp(ent_icon.c_str(), "0") != 0) disp1->set_component_text_printf(enticon.c_str(), "%s", ent_icon.c_str());
              disp1->set_component_text_printf(entlabel.c_str(), "%s", ent_label.c_str());
              disp1->set_component_text_printf(ent_id.c_str(), "%s", ent_value.c_str());
              if (strcmp(ent_value_xcen.c_str(), "0") != 0) disp1->send_command_printf("%s", entxcen.c_str());

      #### Service to populate the page Home #####
      - service: page_home
        variables:
          notification_icon: string
          notification_icon_color_normal: int[]
          notification_icon_color_unread: int[]
          qrcode: bool
          qrcode_icon: string
          qrcode_icon_color: int[]
          entities_pages: bool
          entities_pages_icon: string
          entities_pages_icon_color: int[]
          alarm_state: string
        then:
          - lambda: |-
              // Notification button
              disp1->send_command_printf("is_notification=%i", (notification_text->state.empty() and notification_label->state.empty()) ? 0 : 1);
              disp1->set_component_text_printf("home.bt_notific", "%s", notification_icon.c_str());
              set_component_color->execute("home.bt_notific", notification_unread->state ? notification_icon_color_unread : notification_icon_color_normal, {});
              id(home_notify_icon_color_normal) = notification_icon_color_normal;
              id(home_notify_icon_color_unread) = notification_icon_color_unread;

              // QRCode button
              disp1->send_command_printf("is_qrcode=%i", (qrcode) ? 1 : 0);
              disp1->set_component_text_printf("home.bt_qrcode", "%s", qrcode_icon.c_str());
              set_component_color->execute("home.bt_qrcode", qrcode_icon_color, {});

              // Entities pages button
              disp1->send_command_printf("is_entities=%i", (entities_pages) ? 1 : 0);
              disp1->set_component_text_printf("home.bt_entities", "%s", entities_pages_icon.c_str());
              set_component_color->execute("home.bt_entities", entities_pages_icon_color, {});

              // Alarm button
              disp1->send_command_printf("is_alarm=%i", (alarm_state == "" or alarm_state.empty()) ? 0 : 1);
              update_alarm_icon->execute("home.bt_alarm", alarm_state.c_str());

      #### Service to populate the page Settings #####
      - service: page_settings
        variables:
          reboot: string
          #sleep_mode: string
          brightness: string
          bright: string
          dim: string
        then:
          - lambda: |-
              if (not reboot.empty()) disp1->set_component_text_printf("settings.lbl_reboot", " %s", reboot.c_str());
              disp1->set_component_text_printf("settings.lbl_brightness", " %s", brightness.c_str());
              display_wrapped_text->execute("settings.lbl_bright", bright.c_str(), id(display_mode) == 2 ? 25 : 10);
              display_wrapped_text->execute("settings.lbl_dim", dim.c_str(), id(display_mode) == 2 ? 25 : 10);

      #### Service to populate the media player page #####
      - service: media_player
        variables:
          entity: string
          state: string
          is_volume_muted: bool
          friendly_name: string
          volume_level: int
          media_title: string
          media_artist: string
          media_duration: float
          media_position: float
          media_position_delta: float
          supported_features: int
        then:
          - lambda: |-
              if (current_page->state == "media_player")
                {
                  id(entity_id) = entity;
                  disp1->set_component_text_printf("page_label", "%s", friendly_name.c_str());
                  display_wrapped_text->execute("track", media_title.c_str(), id(display_mode) == 2 ? 16 : 27);
                  display_wrapped_text->execute("artist", media_artist.c_str(), id(display_mode) == 2 ? 26 : 40);

                  // on/off button
                  if (supported_features & 128 and state == "off") //TURN_ON
                    {
                      set_component_color->execute("bt_on_off", { 65535 }, {} );
                      disp1->show_component("bt_on_off");
                    }
                  else if (supported_features & 256 and state != "off") //TURN_OFF
                    {
                      set_component_color->execute("bt_on_off", { 10597 }, {} );
                      disp1->show_component("bt_on_off");
                    }
                  else disp1->hide_component("bt_on_off");

                  // play/pause button
                  if ((supported_features & 512 or supported_features & 16384) and state != "playing" and state != "off") //PLAY_MEDIA+PLAY
                    {
                      disp1->set_component_text_printf("bt_play_pause", "%s", "\uE409"); // mdi:play
                      disp1->show_component("bt_play_pause");
                    }
                  else if (supported_features & 1 and state == "playing" ) //PAUSE
                    {
                      disp1->set_component_text_printf("bt_play_pause", "%s", "\uE3E3"); // mdi:pause
                      disp1->show_component("bt_play_pause");
                    }
                  else disp1->hide_component("bt_play_pause");

                  // bt_prev button - PREVIOUS_TRACK
                  if (supported_features & 16 and state != "off") disp1->show_component("bt_prev"); else disp1->hide_component("bt_prev");
                  // bt_next button - NEXT_TRACK
                  if (supported_features & 32 and state != "off") disp1->show_component("bt_next"); else disp1->hide_component("bt_next");

                  // Stop button - STOP
                  //if (supported_features & 4096 and (state == "playing" or state == "paused")) disp1->show_component("bt_stop"); else disp1->hide_component("bt_stop");

                  // mute/unmute button - VOLUME_MUTE
                  disp1->set_component_value("is_muted", (is_volume_muted) ? 1 : 0);
                  if (supported_features & 8 and is_volume_muted) // unmute
                    {
                      disp1->set_component_text_printf("bt_mute", "%s", "\uEE07"); // mdi:volume-variant-off
                      disp1->show_component("bt_mute");
                    }
                  else if (supported_features & 8) // mute
                    {
                      disp1->set_component_text_printf("bt_mute", "%s", "\uE57E"); // mdi:volume-low
                      disp1->show_component("bt_mute");
                    }
                  else disp1->hide_component("bt_mute");

                  // VOLUME_SET
                  if (supported_features & 4)
                    {
                      if (volume_level != id(last_volume_level))
                        {
                          id(last_volume_level) = volume_level;
                          disp1->set_component_text_printf("vol_text", "%i%%", volume_level);
                          disp1->set_component_value("vol_slider", volume_level);
                        }
                      disp1->show_component("vol_slider");
                      disp1->show_component("bt_vol_down");
                      disp1->show_component("bt_vol_up");
                      disp1->show_component("vol_text");
                    }
                  else
                    {
                      disp1->hide_component("vol_slider");
                      disp1->hide_component("bt_vol_down");
                      disp1->hide_component("bt_vol_up");
                      disp1->hide_component("vol_text");
                    }

                  if (media_duration > 0)
                    {
                      if (media_duration != id(last_media_duration) or media_position != id(last_media_position))
                        {
                          id(last_media_duration) = media_duration;
                          id(last_media_position) = media_position;
                          disp1->set_component_value("prg_current", int(round(min(media_position + media_position_delta, media_duration))));
                        }
                      disp1->set_component_value("prg_total", int(round(media_duration)));
                      disp1->send_command_printf("prg_timer.en=%i", (state == "playing") ? 1 : 0);
                      disp1->show_component("time_current");
                      disp1->show_component("time_total");
                      disp1->show_component("time_progress");
                    }
                  else
                    {
                      disp1->send_command_printf("prg_timer.en=0");
                      disp1->hide_component("time_current");
                      disp1->hide_component("time_total");
                      disp1->hide_component("time_progress");
                    }
                }

##### START - DISPLAY START CONFIGURATION #####
display:
  - id: disp1
    platform: nextion
    uart_id: tf_uart
    #start_up_page: 8   ####### Enable this when https://github.com/esphome/esphome/pull/5673 is merged
    on_page: # I couldn't make this trigger to work, so used text_sensor nspanelevent and localevent instead
      lambda: |-
        ESP_LOGW("display.disp1.on_page", "NEXTION PAGE CHANGED");
        ESP_LOGW("display.disp1.on_page", "New page: %i", int(x));
    on_setup:
      - script.execute: boot_sequence

##### START - GLOBALS CONFIGURATION #####
globals:

  ###### Last volume level from Home Assistant ######
  - id: last_volume_level
    type: uint
    restore_value: false
    initial_value: '0'

  ###### Last duration from Home Assistant ######
  - id: last_media_duration
    type: uint
    restore_value: false
    initial_value: '0'

  ###### Last duration from Home Assistant ######
  - id: last_media_position
    type: uint
    restore_value: false
    initial_value: '0'

  ###### Relay fallback even when buttons have other entities? ######
  - id: relay_1_fallback
    type: bool
    restore_value: true
    initial_value: 'false'
  - id: relay_2_fallback
    type: bool
    restore_value: true
    initial_value: 'false'

  ##### Display mode (1 = EU, 2 = US, 3 = US Landscape)
  - id: display_mode
    type: uint
    restore_value: true
    initial_value: '0'

  ##### Entity Id of the entity displayed on the detailed pages
  - id: entity_id
    type: std::string
    restore_value: no
    initial_value: ''

  ##### Is embedded thermostat set as main climate entity? #####
  - id: is_embedded_thermostat
    type: bool
    restore_value: true
    initial_value: 'false'

  ##### Save Display Brightness for NSPanel reboot #####
  - id: display_brightness_global
    type: uint
    restore_value: true
    initial_value: '100'

  ##### Save Display DIM Brightness for NSPanel reboot
  - id: display_dim_brightness_global
    type: uint
    restore_value: true
    initial_value: '10'

  ##### Remember last brighness value sent to Nextion #####
  - id: display_last_brightness
    type: uint
    restore_value: false
    initial_value: '100'

  ##### Temperature unit #####
  ##### Is embedded sensor used for indoor temperature? #####
  - id: embedded_indoor_temp
    type: bool
    restore_value: true
    initial_value: 'false'
  - id: temp_unit_fahrenheit
    type: bool
    restore_value: true
    initial_value: 'false'

  ##### Date/time formats #####
  #- id: mui_date_format
  #  type: std::string
  #  restore_value: no
  #  initial_value: '"%A, %d.%m"'
  - id: home_date_color
    type: uint
    restore_value: true
    initial_value: '65535'

  - id: mui_time_format
    type: std::string
    restore_value: no
    initial_value: '"%H:%M"'
  - id: home_time_color
    type: uint
    restore_value: true
    initial_value: '65535'

  ##### Relay icons #####
  - id: home_relay1_icon
    type: std::string
    restore_value: false
    initial_value: ''
  - id: home_relay1_icon_color
    type: uint
    restore_value: true
    initial_value: '65535'

  - id: home_relay2_icon
    type: std::string
    restore_value: false
    initial_value: ''
  - id: home_relay2_icon_color
    type: uint
    restore_value: true
    initial_value: '65535'

  - id: home_notify_icon_color_normal
    type: std::vector<int>
    restore_value: false
  - id: home_notify_icon_color_unread
    type: std::vector<int>
    restore_value: false

  ##### Versions #####
  - id: version_blueprint
    type: std::string
    restore_value: false
    initial_value: ''
  - id: version_tft
    type: std::string
    restore_value: false
    initial_value: ''

##### START - BINARY SENSOR CONFIGURATION #####
binary_sensor:

  ###### LEFT BUTTON BELOW DISPLAY TO TOGGLE RELAY#####
  - name: ${device_name} Left Button
    platform: gpio
    id: left_button
    pin:
      number: 14
      inverted: true
    on_multi_click:
      - timing: &long_click-timing
          - ON for at least 0.8s
        then:
          - logger.log: "Left button - Long click"
          - script.execute:
              id: ha_button
              page: !lambda return current_page->state.c_str();
              component: "hw_bt_left"
              command: "long_click"
      - timing: &short_click-timing
          - ON for at most 0.8s
        then:
          - logger.log: "Left button - Short click"
          - if:
              condition:
                or:
                  - switch.is_on: relay1_local
                  - and:
                      - lambda: !lambda return id(relay_1_fallback);
                      - or:
                          - not:
                              - api.connected:
                          - not:
                              - wifi.connected:
              then:
                - switch.toggle: relay_1
          - script.execute:
              id: ha_button
              page: !lambda return current_page->state.c_str();
              component: "hw_bt_left"
              command: "short_click"
      - timing: &hold_to_restart-timing
          - ON for at least 15.0s
        then:
          - switch.turn_off: screen_power
          - delay: 5s
          - switch.turn_on: screen_power
          - delay: 2s
          - lambda: disp1->soft_reset();
          - delay: 2s
          - script.execute: boot_sequence

  ##### RIGHT BUTTON BELOW DISPLAY TO TOGGLE RELAY #####
  - name: ${device_name} Right Button
    platform: gpio
    id: right_button
    pin:
      number: 27
      inverted: true
    on_multi_click:
      - timing: *long_click-timing
        then:
          - logger.log: "Right button - Long click"
          - script.execute:
              id: ha_button
              page: !lambda return current_page->state.c_str();
              component: "hw_bt_right"
              command: "long_click"
      - timing: *short_click-timing
        then:
          - logger.log: "Right button - Short click"
          - if:
              condition:
                or:
                  - switch.is_on: relay2_local
                  - and:
                      - lambda: !lambda return id(relay_2_fallback);
                      - or:
                          - not:
                              - api.connected:
                          - not:
                              - wifi.connected:
              then:
                - switch.toggle: relay_2
          - script.execute:
              id: ha_button
              page: !lambda return current_page->state.c_str();
              component: "hw_bt_right"
              command: "short_click"
      - timing: *hold_to_restart-timing
        then: #Restart the panel
          - button.press: restart_nspanel

  ##### Restart NSPanel Button - Setting Page #####
  - name: ${device_name} Restart
    platform: nextion
    page_id: 7
    component_id: 9
    internal: true
    on_click:
      - button.press: restart_nspanel
  ##### Restart NSPanel Button - Boot Page #####
  - name: ${device_name} Restart
    platform: nextion
    page_id: 8
    component_id: 4
    internal: true
    on_click:
      - button.press: restart_nspanel

  ## Delays initial info from HA to the display #####
  - name: ${device_name} Nextion display
    id: nextion_init
    platform: template
    device_class: connectivity
    publish_initial_state: true
    entity_category: diagnostic
    icon: mdi:tablet-dashboard

  ##### API connection status
  - name: ${device_name} Status
    platform: status
    id: api_status
    on_state:
      then:
        - script.execute:
            id: refresh_wifi_icon

##### START - BUTTON CONFIGURATION #####
button:
  ###### REBOOT BUTTON #####
  - name: ${device_name} Restart
    platform: restart
    id: restart_nspanel

##### START - NUMBER CONFIGURATION #####
number:

  ##### SCREEN BRIGHTNESS #####
  - name: ${device_name} Display Brightness
    id: display_brightness
    platform: template
    entity_category: config
    unit_of_measurement: '%'
    min_value: 1
    max_value: 100
    step: 1
    restore_value: true
    optimistic: true
    set_action:
      then:
        - lambda: |-
            id(display_brightness_global) = int(x);
            disp1->send_command_printf("brightness=%i", int(x));
            disp1->send_command_printf("settings.brightslider.val=%i", int(x));
            if (current_page->state != "screensaver")
              {
                disp1->set_backlight_brightness(x/100);
                timer_dim->execute(current_page->state.c_str(), int(timeout_dim->state));
                timer_sleep->execute(current_page->state.c_str(), int(timeout_sleep->state));
                if (current_page->state == "settings") disp1->set_component_text_printf("bright_text", "%i%%", int(x));
              }

  ##### SCREEN BRIGHTNESS DIMMED DOWN #####
  - name: ${device_name} Display Brightness Dimdown
    id: display_dim_brightness
    platform: template
    entity_category: config
    unit_of_measurement: '%'
    min_value: 1
    max_value: 100
    step: 1
    restore_value: true
    optimistic: true
    set_action:
      then:
        - lambda: |-
            id(display_dim_brightness_global) = int(x);
            disp1->send_command_printf("brightness_dim=%i", int(x));
            disp1->send_command_printf("settings.dimslider.val=%i", int(x));
            if (current_page->state != "screensaver" and (id(display_last_brightness) <= id(display_dim_brightness_global)))
              {
                set_brightness->execute(x);
                timer_sleep->execute(current_page->state.c_str(), int(timeout_sleep->state));
                if (current_page->state == "settings") disp1->set_component_text_printf("dim_text", "%i%%", int(x));
              }

  ##### Temperature Correction #####
  - name: ${device_name} Temperature Correction
    platform: template
    id: temperature_correction
    entity_category: config
    unit_of_measurement: '°C'
    initial_value: 0
    min_value: -10
    max_value: 10
    step: 0.1
    restore_value: true
    internal: false
    optimistic: true
    set_action:
      - logger.log: Temperature correction changed.
      - delay: 1s
      - lambda: temp_nspanel->publish_state(temp_nspanel->raw_state);

  ##### Timers settings #####
  - name: ${device_name} Timeout Page
    platform: template
    id: timeout_page
    entity_category: config
    min_value: 0
    max_value: 300
    initial_value: 15
    step: 1
    restore_value: true
    optimistic: true
    icon: mdi:timer
    unit_of_measurement: "s"
    set_action:
      - lambda: timer_page->execute(current_page->state.c_str(), int(x));
  - name: ${device_name} Timeout Dimming
    platform: template
    id: timeout_dim
    entity_category: config
    min_value: 0
    max_value: 300
    initial_value: 30
    step: 1
    restore_value: true
    optimistic: true
    icon: mdi:timer
    unit_of_measurement: "s"
    set_action:
      - lambda: timer_dim->execute(current_page->state.c_str(), int(x));
  - name: ${device_name} Timeout Sleep
    platform: template
    id: timeout_sleep
    entity_category: config
    min_value: 0
    max_value: 300
    initial_value: 60
    step: 1
    restore_value: true
    optimistic: true
    icon: mdi:timer
    unit_of_measurement: "s"
    set_action:
      - lambda: |-
          timer_dim->execute(current_page->state.c_str(), int(timeout_dim->state));
          timer_sleep->execute(current_page->state.c_str(), int(x));

##### START - SELECT CONFIGURATION #####
select:
  - name: ${device_name} Wake-up page
    id: wakeup_page_name
    platform: template
    options:
      - home
      - buttonpage01
      - buttonpage02
      - buttonpage03
      - buttonpage04
      - entitypage01
      - entitypage02
      - entitypage03
      - entitypage04
      - qrcode
      - alarm
    initial_option: home
    optimistic: true
    restore_value: true
    internal: false
    entity_category: config
    icon: mdi:page-next-outline
    set_action:
      - script.execute:
          id: page_screensaver
          construct_page: false

##### START - SENSOR CONFIGURATION #####
sensor:

  ##### touchevent sensor, Reset the page timeout #####
  - id: touchevent
    platform: nextion
    nextion_id: disp1
    component_name: touchevent
    internal: true
    on_value:
      then:
        - lambda: |-
            timer_reset_all->execute(current_page->state.c_str());

  ##### INTERNAL TEMPERATURE SENSOR, ADC VALUE #####
  - id: ntc_source
    platform: adc
    pin: 38
    update_interval: 60s
    attenuation: 11db

  ##### INTERNAL TEMPERATURE SENSOR, adc reading converted to resistance (calculation)#####
  - id: resistance_sensor
    platform: resistance
    sensor: ntc_source
    configuration: DOWNSTREAM
    resistor: 11.2kOhm

  ##### INTERNAL TEMPERATURE SENSOR, resistance to temperature (calculation) #####
  - name: ${device_name} Temperature
    platform: ntc
    id: temp_nspanel
    sensor: resistance_sensor
    calibration:
      b_constant: 3950
      reference_temperature: 25°C
      reference_resistance: 10kOhm
    filters:
      - lambda: return x + temperature_correction->state;
    on_value:
      then:
        # Show panel's temperature if API or Wi-Fi are out
        - lambda: display_embedded_temp->execute();

  ###### Display Brightness GET VALUE FROM NSPanel SLIDER #####
  - name: ${device_name} brightness Slider
    platform: nextion
    id: brightslider
    variable_name: brightslider
    internal: true
    on_value:
      then:
        - number.set:
            id: display_brightness
            value: !lambda 'return int(x);'
        - lambda: |-
            timer_reset_all->execute("settings");

  ###### Display DIM Brightness GET VALUE FROM NSPanel SLIDER #####
  - name: ${device_name} dim brightness slider
    platform: nextion
    id: dimslider
    variable_name: dimslider
    internal: true
    on_value:
      then:
        - number.set:
            id: display_dim_brightness
            value: !lambda 'return int(x);'
        - lambda: |-
            timer_reset_all->execute("settings");

##### START - SWITCH CONFIGURATION #####
switch:

  ##### Notification unread #####
  - name: ${device_name} Notification unread
    platform: template
    id: notification_unread
    entity_category: config
    optimistic: true
    restore_mode: ALWAYS_OFF
    on_turn_on:
      - lambda: set_component_color->execute("home.bt_notific", id(home_notify_icon_color_unread), {});
    on_turn_off:
      - lambda: set_component_color->execute("home.bt_notific", id(home_notify_icon_color_normal), {});

  ##### Notification sound #####
  - name: ${device_name} Notification sound
    platform: template
    id: notification_sound
    entity_category: config
    optimistic: true
    restore_mode: RESTORE_DEFAULT_OFF

  ##### PHYSICAL SWITCH 1 #####
  - name: ${device_name} Relay 1
    platform: gpio
    id: relay_1
    pin:
      number: 22
    restore_mode: RESTORE_DEFAULT_OFF
    on_turn_on:
      then:
        - script.execute:
            id: refresh_relays
    on_turn_off:
      then:
        - script.execute:
            id: refresh_relays
  ##### PHYSICAL SWITCH 2 ######
  - name: ${device_name} Relay 2
    platform: gpio
    id: relay_2
    pin:
      number: 19
    restore_mode: RESTORE_DEFAULT_OFF
    on_turn_on:
      then:
        - script.execute:
            id: refresh_relays
    on_turn_off:
      then:
        - script.execute:
            id: refresh_relays

  ##### DISPLAY ALWAYS ON #####
  - name: ${device_name} Screen Power
    platform: gpio
    id: screen_power
    entity_category: config
    pin:
      number: 4
      inverted: true
    restore_mode: ALWAYS_ON
    internal: true

  ##### Relay Local control #####
  - name: ${device_name} Relay 1 Local
    platform: template
    id: relay1_local
    entity_category: config
    optimistic: true
    restore_mode: RESTORE_DEFAULT_OFF
    internal: true
    on_turn_on:
      - logger.log: "Relay 1 Local turned On!"
    on_turn_off:
      - logger.log: "Relay 1 Local turned Off!"
  - name: ${device_name} Relay 2 Local
    platform: template
    id: relay2_local
    entity_category: config
    optimistic: true
    restore_mode: RESTORE_DEFAULT_OFF
    internal: true
    on_turn_on:
      - logger.log: "Relay 2 Local turned On!"
    on_turn_off:
      - logger.log: "Relay 2 Local turned Off!"

##### START - TEXT SENSOR CONFIGURATION #####
text_sensor:

  ##### Current page name #####
  - name: ${device_name} Current page
    id: current_page
    #platform: template
    platform: nextion
    nextion_id: disp1
    component_name: currentpage
    icon: mdi:tablet-dashboard
    internal: false
    disabled_by_default: false
    filters:
      - lambda: |-
          x = x.c_str();
          x.shrink_to_fit();
          return x;
    on_value:
      then:
        - lambda: |-
            static const char *const TAG = "text_sensor.current_page";
            // Construct new page
            ESP_LOGV(TAG, "Construct new page");
            page_changed->execute(x.c_str());

  - name: ${device_name} Notification Label
    platform: template
    id: notification_label

  - name: ${device_name} Notification Text
    platform: template
    id: notification_text

  ##### NSPanel event sensor, the main action sensor - push to HA #####
  - name: ${device_name} NSPanel event
    platform: nextion
    nextion_id: disp1
    id: disp1_nspanel_event
    component_name: nspanelevent
    internal: true
    filters:
      - lambda: |-
          x = x.c_str();
          x.shrink_to_fit();
          return x;
    on_value:
      then:
        - lambda: |-
            static const char *const TAG = "text_sensor.disp1_nspanel_event";
            ESP_LOGE(TAG, "Starting");
            DynamicJsonDocument doc(1024);
            deserializeJson(doc, x);
            std::string page = doc["page"];
            std::string component = doc["component"];
            if (not (component == "currentpage" and (page == "screensaver" or page == "home"))) timer_reset_all->execute(page.c_str());
            std::string value = doc["value"];
            std::string entity = id(entity_id); //doc["entity"];
            ESP_LOGE(TAG, "page: %s", page.c_str());
            ESP_LOGE(TAG, "component: %s", component.c_str());
            ESP_LOGE(TAG, "value: %s", value.c_str());
            ESP_LOGE(TAG, "entity: %s", entity.c_str());
            auto ha_event = new esphome::api::CustomAPIDevice();
            ha_event->fire_homeassistant_event("esphome.nspanel_ha_blueprint",
              {
                {"type", "generic"},
                {"page", page},
                {"component", component},
                {"value", value},
                {"entity", entity}
              });

  ##### NSPanel event - Execute actions from ESPHome - NO push to HA #####
  - name: ${device_name} NSPanel local event
    platform: nextion
    nextion_id: disp1
    id: disp1_local_event
    component_name: localevent
    internal: true
    filters:
      - lambda: |-
          x = x.c_str();
          x.shrink_to_fit();
          return x;
    on_value:
      then:
        - lambda: |-
            static const char *const TAG = "text_sensor.localevent";
            DynamicJsonDocument doc(1024);
            deserializeJson(doc, x);
            std::string page = doc["page"];
            std::string event = doc["event"];
            std::string component = doc["component"];
            std::string key = doc["key"];
            std::string value = doc["value"];
            std::string entity = id(entity_id); //doc["entity"];
            int embedded = doc["embedded"];
            std::string service = "";

            // send event to Home Assistant
            auto ha_event = new esphome::api::CustomAPIDevice();
            if (event == "short_click" or event == "long_click") ha_button->execute(page.c_str(), component.c_str(), event.c_str());
            else if (event == "click")
              {
                if (page == "home" and component == "climate")
                  {
                    id(entity_id) = (id(is_embedded_thermostat)) ? "embedded_climate" : "";
                    disp1->set_component_value("climate.embedded", (id(is_embedded_thermostat)) ? 1 : 0);
                  }
                disp1->goto_page("climate");
              }
            else if (page == "light" or page == "climate" or page == "notification")// Generic event
              {
                ha_event->fire_homeassistant_event("esphome.nspanel_ha_blueprint",
                  {
                    {"type", "generic"},
                    {"page", page},
                    {"event", event},
                    {"value", value},
                    {"entity", entity}
                  });
              }

            // page based actions
            if (page == "alarm")
              {
                std::string code_format = doc["code_format"];
                std::string code_arm_req = doc["code_arm_req"];
                std::string title = doc["mui"];
                if (code_format == "number" and (key == "disarm" or code_arm_req == "1"))
                  {
                    disp1->goto_page("keyb_num");
                    disp1->set_component_value("keyb_num.page_id", 23); //Calling from Alarm page
                    disp1->set_component_text_printf("keyb_num.domain", "%s", page.c_str());
                    disp1->set_component_text_printf("keyb_num.key", "%s", key.c_str());
                    disp1->set_component_text_printf("keyb_num.value", "%s", value.c_str());
                    disp1->set_component_text_printf("keyb_num.entity", "%s", entity.c_str());
                    disp1->set_component_text_printf("keyb_num.title", "%s", title.c_str());
                  }
                else service_call_alarm_control_panel->execute(entity.c_str(), key.c_str(), code_format.c_str(), "");
              }
            else if (page == "boot")
              {
                // Detect display mode
                if (doc.containsKey("display_mode"))
                  {
                    std::string display_mode_str = doc["display_mode"];
                    ESP_LOGV(TAG, "display_mode: %s", display_mode_str.c_str());
                    float display_mode_float = stof(display_mode_str);
                    if (display_mode_float > 0) id(display_mode) = int(display_mode_float);
                  }

                // Detect TFT version
                if (doc.containsKey("version"))
                  {
                    std::string version_tmp = doc["version"];
                    id(version_tft) = version_tmp;
                  }
                check_versions->execute();

                // Detect timeout
                if (event == "timeout")
                  {
                    ha_event->fire_homeassistant_event("esphome.nspanel_ha_blueprint",
                      {
                        {"type", "boot"},
                        {"step", "timeout"},
                        {"value", value}
                      });
                    if (stof(value) >= 5)
                      disp1->goto_page(wakeup_page_name->state.c_str());
                  }
              }
            else if (page == "climate") service_call_climate->execute(entity.c_str(), key.c_str(), value.c_str(), (embedded==1));
            else if (page == "cover")
              {
                if (key == "position") ha_call_service->execute("cover.set_cover_position", key.c_str(), value.c_str(), entity.c_str());
                else ha_call_service->execute((std::string("cover.") + key.c_str()), "", "", entity.c_str());
              }
            else if (page == "fan")
              {
                if (key == "stop" or value == "0") ha_call_service->execute("fan.turn_off", "", "", entity.c_str());
                else ha_call_service->execute("fan.turn_on", key.c_str(), value.c_str(), entity.c_str());
              }
            else if (page == "keyb_num")
              {
                std::string base_domain = doc["base_domain"];
                if (base_domain == "alarm")
                {
                  std::string code_format = doc["code_format"];
                  std::string pin = doc["pin"];
                  service_call_alarm_control_panel->execute(entity.c_str(), key.c_str(), code_format.c_str(), pin.c_str());
                }
                else if (base_domain == "" or base_domain.empty()) base_domain = "home";
                disp1->goto_page(base_domain.c_str());
              }
            else if (page == "light") ha_call_service->execute("light.turn_on", key.c_str(), value.c_str(), entity.c_str());
            else if (page == "media_player")
              {
                if (key == "volume_mute") ha_call_service->execute("media_player.volume_mute", "is_volume_muted", value.c_str(), entity.c_str());
                else if (key == "volume_set") ha_call_service->execute("media_player.volume_set", "volume_level", to_string(stof(value) / 100), entity.c_str());
                else if (not key.empty()) ha_call_service->execute((std::string("media_player.") + key.c_str()), "", "", entity.c_str());
              }

### Scripts ######
script:
  ###### Timers ######
  ## Global timer reset - Triggered with a touch on the screen
  - id: timer_reset_all
    mode: restart
    parameters:
      page: string
    then:
      - lambda: |-
          ESP_LOGV("script.timer_reset_all", "Reset timers");
          timer_page->execute(page.c_str(), int(timeout_page->state));
          timer_dim->execute(page.c_str(), int(timeout_dim->state));
          timer_sleep->execute(page.c_str(), int(timeout_sleep->state));

  - id: timer_page # Handle the fallback to home page after a timeout
    mode: restart
    parameters:
      page: string
      timeout: uint
    then:
      - lambda: |-
          ESP_LOGV("script.timer_page", "Reset timer: %is", timeout);
      - if:
          condition:
            - lambda: |-
                return (page != "screensaver" and page != "boot" and page != "home" and timeout >= 1);
          then:
            - delay: !lambda return (timeout *1000);
            - lambda: |-
                ESP_LOGV("script.timer_page", "Timed out on page: %s", current_page->state.c_str());
                if (current_page->state != "screensaver" and current_page->state != "boot" and current_page->state != "home" and timeout >= 1)
                  {
                    ESP_LOGD("script.timer_page", "Fallback to page Home");
                    disp1->goto_page("home");
                  }
  - id: timer_dim # Handle the brightness dimming after a timeout
    mode: restart
    parameters:
      page: string
      timeout: uint
    then:
      - lambda: |-
          ESP_LOGV("script.timer_dim", "Reset timer: %is", timeout);
          if (id(display_last_brightness) <= id(display_dim_brightness_global)
              and page != "screensaver"
              and page != "boot"
              and page != "blank-screensaver") {
            ESP_LOGD("script.timer_dim", "Waking up on page: %s", page.c_str());
            set_brightness->execute(id(display_brightness_global));
          }
      - if:
          condition:
            - lambda: !lambda return (timeout >= 1);
          then:
            - delay: !lambda return (timeout *1000);
            - lambda: |-
                if (current_page->state != "screensaver" and
                    current_page->state != "blank-screensaver" and
                    current_page->state != "boot" and
                    timeout >= 1) {
                  set_brightness->execute(id(display_dim_brightness_global));
                }
  - id: timer_sleep # Handle the sleep (go to screensaver page) after a timeout
    mode: restart
    parameters:
      page: string
      timeout: uint
    then:
      - lambda: |-
          ESP_LOGV("script.timer_sleep", "Reset timer: %is", timeout);
      - if:
          condition:
            - lambda: |-
                return (timeout >= 1 and current_page->state != "screensaver" and current_page->state != "boot");
          then:
            - delay: !lambda return (timeout *1000);
            - lambda: |-
                if (current_page->state != "screensaver" and
                    current_page->state != "boot" and
                    timeout >= 1) {
                  ESP_LOGD("script.timer_sleep", "Going to sleep from page %s", current_page->state.c_str());
                  disp1->goto_page("screensaver");
                  set_brightness->execute(0);
                }

  - id: set_brightness
    mode: restart
    parameters:
      brightness: uint
    then:
      - lambda: |-
          ESP_LOGD("script.set_brightness", "brightness: %i%%", brightness);
          if (current_page->state != "screensaver") {
            if (brightness == id(display_brightness_global)) {
              disp1->send_command_printf("wakeup_timer.en=1");
            } else {
              disp1->set_backlight_brightness(static_cast<float>(brightness) / 100.0f);
            }
          id(display_last_brightness) = brightness;
          }

  - id: set_climate
    mode: restart
    parameters:
      current_temp: float
      target_temp: float
      temp_step: uint
      total_steps: uint
      temp_offset: int
      climate_icon: string
      embedded_climate: bool
    then:
      - if:
          condition:
            - text_sensor.state: # Is climate page visible?
                id: current_page
                state: 'climate'
          then:
            - lambda: |-
                addon_climate_set_climate->execute(embedded_climate);
                disp1->send_command_printf("climateslider.maxval=%i", total_steps);
                disp1->set_component_value("temp_offset", temp_offset);
                disp1->set_component_value("temp_step", temp_step);
                disp1->set_component_text_printf("current_temp", "%.1f°", current_temp);
                disp1->show_component("current_temp");
                disp1->show_component("current_icon");
                if (target_temp > -999)
                  {
                    float slider_val = round(((10*target_temp) - temp_offset) / temp_step);
                    disp1->set_component_value("climateslider", slider_val);
                    disp1->set_component_text_printf("target_temp", "%.1f°", target_temp);
                    disp1->set_component_text_printf("target_icon", "%s", climate_icon.c_str());
                    disp1->show_component("target_icon");
                    disp1->show_component("target_temp");
                    disp1->show_component("climateslider");
                    disp1->show_component("decrease_temp");
                    disp1->show_component("increase_temp");
                  }
                else
                  {
                    disp1->hide_component("target_icon");
                    disp1->hide_component("target_temp");
                    disp1->hide_component("climateslider");
                    disp1->hide_component("decrease_temp");
                    disp1->hide_component("increase_temp");
                  }
                disp1->set_component_value("embedded", (embedded_climate) ? 1 : 0);

  - id: refresh_datetime
    mode: restart
    then:
      - lambda: |-
          std::string time_format_str = id(mui_time_format);
          if (time_format_str.find("%p") != std::string::npos)
            {
              std::string meridiem_text = id(time_provider).now().strftime("%p");
              disp1->set_component_text_printf("home.meridiem", "%s", meridiem_text.c_str());
            }
          else { disp1->set_component_text_printf("home.meridiem", " "); }
          if (time_format_str.find("%-H") != std::string::npos) { time_format_str = time_format_str.replace(time_format_str.find("%-H"), sizeof("%-H")-1, to_string((int)(id(time_provider).now().hour))); }
          if (time_format_str.find("%-I") != std::string::npos)
            {
              if (id(time_provider).now().hour>12)
                {
                  time_format_str = time_format_str.replace(time_format_str.find("%-I"), sizeof("%-I")-1, to_string((int)(id(time_provider).now().hour-12)));
                }
              else if (id(time_provider).now().hour==0)
                {
                  time_format_str = time_format_str.replace(time_format_str.find("%-I"), sizeof("%-I")-1, "12");
                }
              else
                {
                  time_format_str = time_format_str.replace(time_format_str.find("%-I"), sizeof("%-I")-1, to_string((int)(id(time_provider).now().hour)));
                }
            }
          std::string time_text = id(time_provider).now().strftime(time_format_str);
          disp1->set_component_text_printf("home.time", "%s", time_text.c_str());

  - id: refresh_relays
    mode: restart
    then:
      - lambda: |-
          // Chips - Relays
          if (relay_1->state) disp1->set_component_text_printf("home.icon_top_01", "%s", id(home_relay1_icon).c_str());
            else disp1->set_component_text_printf("icon_top_01", "\uFFFF");
          if (relay_2->state) disp1->set_component_text_printf("home.icon_top_02", "%s", id(home_relay2_icon).c_str());
            else disp1->set_component_text_printf("home.icon_top_02", "\uFFFF");
          // Hardware buttons - Fallback mode
          if (relay_1->state and relay1_local->state) disp1->send_command_printf("home.left_bt_pic.val=%i", (relay_1->state) ? 1 : 0);
          if (relay_2->state and relay2_local->state) disp1->send_command_printf("home.right_bt_pic.val=%i", (relay_2->state) ? 1 : 0);

  - id: refresh_wifi_icon
    mode: restart
    then:
      - if:
          condition:
            - binary_sensor.is_on: nextion_init
          then:
            # Update Wi-Fi icon
            - if:
                condition:
                  wifi.connected:
                then:
                  - if:
                      condition:
                        api.connected:
                      then:
                        - lambda: disp1->send_command_printf("api=1");
                        - lambda: disp1->set_component_text_printf("home.wifi_icon", "%s", "\uE5A8");
                        - lambda: disp1->set_component_font_color("home.wifi_icon", 33808);
                      else:
                        - lambda: disp1->send_command_printf("api=0");
                        - lambda: disp1->set_component_text_printf("home.wifi_icon", "%s", "\uF256");
                        - lambda: disp1->set_component_font_color("home.wifi_icon", 63488);
                else:
                  - lambda: disp1->send_command_printf("api=0");
                  - lambda: disp1->set_component_text_printf("home.wifi_icon", "%s", "\uE5A9");
                  - lambda: disp1->set_component_font_color("home.wifi_icon", 63488);

  - id: service_call_alarm_control_panel
    mode: restart
    parameters:
      entity: string
      key: string
      code_format: string
      pin: string
    then:
      - lambda: |-
          std::string service = "";
          if (key == "home") service = "alarm_control_panel.alarm_arm_home";
          else if (key == "away") service = "alarm_control_panel.alarm_arm_away";
          else if (key == "night") service = "alarm_control_panel.alarm_arm_night";
          else if (key == "vacation") service = "alarm_control_panel.alarm_arm_vacation";
          else if (key == "bypass") service = "alarm_control_panel.alarm_arm_custom_bypass";
          else if (key == "disarm") service = "alarm_control_panel.alarm_disarm";
          if (service != "" and not service.empty())
            {
              HomeassistantServiceResponse resp;
              HomeassistantServiceMap resp_kv;
              resp.service = service.c_str();
              resp_kv.key = "entity_id";
              resp_kv.value = entity.c_str();
              resp.data.push_back(resp_kv);
              if (pin != "" and not pin.empty())
                {
                  resp_kv.key = "code";
                  resp_kv.value = pin.c_str();
                  resp.data.push_back(resp_kv);
                }
              api_server->send_homeassistant_service_call(resp);
            }

  - id: service_call_climate
    mode: restart
    parameters:
      entity: string
      key: string
      value: string
      embedded: bool
    then:
      - lambda: |-
          if (embedded)
            addon_climate_service_call->execute(key.c_str(), value.c_str());
          else if (key == "set_temperature")
            ha_call_service->execute("climate.set_temperature", "temperature", to_string(stof(value) / 10), entity.c_str());
          else if (key == "hvac_mode")
            ha_call_service->execute("climate.set_hvac_mode", key.c_str(), value.c_str(), entity.c_str());

  - id: ha_call_service
    mode: restart
    parameters:
      service: string
      key: string
      value: string
      entity: string
    then:
      - lambda: |-
          if (service != "" and not service.empty())
            {
              auto ha_event = new esphome::api::CustomAPIDevice();
              ha_event->fire_homeassistant_event("esphome.nspanel_ha_blueprint",
                {
                  {"type", "service_call"},
                  {"service", service},
                  {"entity", entity},
                  {"key", key},
                  {"value", value}
                });
            }

  - id: ha_button
    mode: parallel
    parameters:
      page: string
      component: string
      command: string
    then:
      - lambda: |-
          timer_reset_all->execute(page.c_str());
          auto ha_event = new esphome::api::CustomAPIDevice();
          ha_event->fire_homeassistant_event("esphome.nspanel_ha_blueprint",
            {
              {"type", "button_click"},
              {"page", page},
              {"component", component},
              {"command", command}
            });

  - id: update_alarm_icon
    mode: restart
    parameters:
      component: string
      state: string
    then:
      - lambda: |-
          std::string alarm_icon = "\uEECC"; //mdi:shield-alert-outline
          int alarm_color = 65535;
          if (state == "disarmed")
            {
              alarm_icon = "\uE99B"; //mdi:shield-off-outline
              alarm_color = 65535;
            }
          else if (state == "armed_home")
            {
              alarm_icon = "\uECCA"; //mdi:shield-home-outline
              alarm_color = 19818;
            }
          else if (state == "armed_away")
            {
              alarm_icon = "\uECCB"; //mdi:shield-lock-outline
              alarm_color = 19818;
            }
          else if (state == "armed_night")
            {
              alarm_icon = "\uF828"; //mdi:shield-moon-outline
              alarm_color = 19818;
            }
          else if (state == "armed_vacation")
            {
              alarm_icon = "\uECC6"; //mdi:shield-airplane-outline
              alarm_color = 19818;
            }
          else if (state == "armed_custom_bypass")
            {
              alarm_icon = "\uE77F"; //mdi:shield-half-full
              alarm_color = 19818;
            }
          else if (state == "pending" or state == "arming")
            {
              alarm_icon = "\uE498"; //mdi:shield-outline
              alarm_color = 65024;
            }
          else if (state == "disarming")
            {
              alarm_icon = "\uE99B"; //mdi:shield-off-outline
              alarm_color = 65024;
            }
          else if (state == "triggered")
            {
              alarm_icon = "\uEECC"; //mdi:shield-alert-outline
              alarm_color = 63488;
            }
          disp1->set_component_text_printf(component.c_str(), alarm_icon.c_str());
          disp1->set_component_font_color(component.c_str(), alarm_color);

  - id: update_climate_icon
    mode: restart
    parameters:
      component: string
      action: uint
      mode: uint
    then:
      - lambda: |-
          switch (action) // CLIMATE_ACTION_OFF = 0, CLIMATE_ACTION_COOLING = 2, CLIMATE_ACTION_HEATING = 3, CLIMATE_ACTION_IDLE = 4, CLIMATE_ACTION_DRYING = 5, CLIMATE_ACTION_FAN = 6
            {
              case 0: //CLIMATE_ACTION_OFF
                switch (mode) // CLIMATE_MODE_OFF = 0, CLIMATE_MODE_HEAT_COOL = 1, CLIMATE_MODE_COOL = 2, CLIMATE_MODE_HEAT = 3, CLIMATE_MODE_FAN_ONLY = 4, CLIMATE_MODE_DRY = 5, CLIMATE_MODE_AUTO = 6
                  {
                    case 0: //CLIMATE_MODE_OFF
                      disp1->set_component_text_printf(component.c_str(), "%s", "\uFFFF"); // (E424) Don't show icon when off
                      disp1->set_component_font_color(component.c_str(), 35921); // grey (off)
                      break;
                    case 1: //CLIMATE_MODE_HEAT_COOL
                      disp1->set_component_text_printf(component.c_str(), "%s", "\uE069"); // mdi:autorenew
                      disp1->set_component_font_color(component.c_str(), 35921); // grey (off)
                      break;
                    case 2: //CLIMATE_MODE_COOL
                      disp1->set_component_text_printf(component.c_str(), "%s", "\uE716"); // mdi:snowflake
                      disp1->set_component_font_color(component.c_str(), 35921); // grey (off)
                      break;
                    case 3: //CLIMATE_MODE_HEAT
                      disp1->set_component_text_printf(component.c_str(), "%s", "\uE237"); // mdi:fire
                      disp1->set_component_font_color(component.c_str(), 35921); // grey (off)
                      break;
                    case 4: //CLIMATE_MODE_FAN_ONLY
                      disp1->set_component_text_printf(component.c_str(), "%s", "\uE20F"); // mdi:fan
                      disp1->set_component_font_color(component.c_str(), 35921); // grey (off)
                      break;
                    case 5: //CLIMATE_MODE_DRY
                      disp1->set_component_text_printf(component.c_str(), "%s", "\uE58D"); // mdi:water-percent
                      disp1->set_component_font_color(component.c_str(), 35921); // grey (off)
                      break;
                    case 6: //CLIMATE_MODE_AUTO
                      disp1->set_component_text_printf(component.c_str(), "%s", "\uEE8D"); // mdi:calendar-sync
                      disp1->set_component_font_color(component.c_str(), 35921); // grey (off)
                      break;
                  }
                  break;
              case 2: //CLIMATE_ACTION_COOLING
                disp1->set_component_text_printf(component.c_str(), "%s", "\uE716"); // mdi:snowflake
                disp1->set_component_font_color(component.c_str(), 1055); // blue
                break;
              case 3: //CLIMATE_ACTION_HEATING
                disp1->set_component_text_printf(component.c_str(), "%s", "\uE237"); // mdi:fire
                disp1->set_component_font_color(component.c_str(), 64164); // deep-orange
                break;
              case 4: //CLIMATE_ACTION_IDLE
                disp1->set_component_text_printf(component.c_str(), "%s", "\uE50E"); // mdi:thermometer
                disp1->set_component_font_color(component.c_str(), 35921); // grey (off)
                break;
              case 5: //CLIMATE_ACTION_DRYING
                disp1->set_component_text_printf(component.c_str(), "%s", "\uE58D"); // mdi:water-percent
                disp1->set_component_font_color(component.c_str(), 64704); // orange
                break;
              case 6: //CLIMATE_ACTION_FAN
                disp1->set_component_text_printf(component.c_str(), "%s", "\uE20F"); // mdi:fan
                disp1->set_component_font_color(component.c_str(), 1530); // cyan
                break;
            }

  - id: set_component_color
    mode: queued
    parameters:
      component: string
      foreground: int[]
      background: int[]
    then:
      - lambda: |-
          int fg565 = -1;
          int bg565 = -1;

          // Foreground
          if (foreground.size() == 3) fg565 = ((foreground[0] & 0b11111000) << 8) | ((foreground[1] & 0b11111100) << 3) | (foreground[2] >> 3);
          else if (foreground.size() == 1) fg565 = foreground[0];
          if (fg565 >= 0) disp1->set_component_font_color(component.c_str(), fg565);

          // Background
          if (background.size() == 3) bg565 = ((background[0] & 0b11111000) << 8) | ((background[1] & 0b11111100) << 3) | (background[2] >> 3);
          else if (background.size() == 1) bg565 = background[0];
          if (bg565 >= 0) disp1->set_component_background_color(component.c_str(), bg565);

  - id: display_wrapped_text
    mode: queued
    parameters:
      component: string
      text: string
      line_length_limit: uint
    then:
      - lambda: |-
          int startPos = 0;
          int endPos = 0;
          std::string wrappedText = "";
          while (startPos < text.length()) {
            while (text[startPos] == ' ' and startPos < text.length()) { startPos++; }
            int endPos = startPos + line_length_limit;
            if (endPos >= text.length()) endPos = text.length();
            else
              {
                while (endPos > startPos && text[endPos] != ' ') { endPos--; }
                if (endPos == startPos) endPos = startPos + line_length_limit; // Handle case of long word
              }
            wrappedText += text.substr(startPos, endPos-startPos);
            if (endPos < text.length())
              {
                while (text[endPos] == ' ') { endPos--; }
                if (endPos >= startPos) wrappedText += "\\r";
              }
            startPos = endPos + 1; // Skip the space
            while (text[startPos] == ' ' and startPos < text.length()) { startPos++; }
          }
          disp1->set_component_text_printf(component.c_str(), "%s", wrappedText.c_str());

  - id: display_embedded_temp
    mode: restart
    then:
      - if:
          condition:
            - or:
                - lambda: return id(embedded_indoor_temp);
                - not:
                    - api.connected:
                - not:
                    - wifi.connected:
          then:
            - lambda: |-
                if (id(temp_unit_fahrenheit)) disp1->set_component_text_printf("home.current_temp", "%.0f°F", ((temp_nspanel->state * 9.0 / 5.0) + 32.0)); // °F = (°C × 9/5) + 32
                else disp1->set_component_text_printf("home.current_temp", "%.1f°C", temp_nspanel->state);

  - id: check_versions
    mode: restart
    then:
      - wait_until:
          condition:
            - lambda: |-
                auto compareVersions = [](const char* version1, const char* version2) -> bool
                  {
                    int major1 = 0, minor1 = 0;
                    int major2 = 0, minor2 = 0;

                    sscanf(version1, "%d.%d", &major1, &minor1);
                    sscanf(version2, "%d.%d", &major2, &minor2);

                    return (major1 == major2) && (minor1 == minor2);
                  };
                return (compareVersions("${version}", id(version_tft).c_str()) and compareVersions("${version}", id(version_blueprint).c_str()));
            #- lambda: !lambda 'return (id(version_tft) == "${version}");'
            #- lambda: !lambda 'return (id(version_blueprint) == "${version}");'
          timeout: 60s
      - lambda: |-
          static const char *const TAG = "script.check_versions";
          auto compareVersions = [](const char* version1, const char* version2) -> bool
            {
                int major1 = 0, minor1 = 0;
                int major2 = 0, minor2 = 0;

                sscanf(version1, "%d.%d", &major1, &minor1);
                sscanf(version2, "%d.%d", &major2, &minor2);

                return (major1 == major2) && (minor1 == minor2);
            };
          ESP_LOGD(TAG, "ESPHome version: ${version}");
          ESP_LOGD(TAG, "TFT version: %s", id(version_tft).c_str());
          if (not compareVersions("${version}", id(version_tft).c_str())) ESP_LOGE(TAG, "TFT version mismatch!");
          ESP_LOGD(TAG, "Blueprint version: %s", id(version_blueprint).c_str());
          if (not compareVersions("${version}", id(version_blueprint).c_str())) ESP_LOGE(TAG, "Blueprint version mismatch!");
          
          std::string framework = "unknown";
          #ifdef ARDUINO
          framework = "arduino";
          #elif defined(USE_ESP_IDF)
          framework = "esp-idf";
          #endif
          ESP_LOGD(TAG, "Framework: %s", framework.c_str());

          auto ha_event = new esphome::api::CustomAPIDevice();
          ha_event->fire_homeassistant_event("esphome.nspanel_ha_blueprint",
            {
              {"type", "version"},
              {"tft", id(version_tft).c_str()},
              {"esphome", "${version}"},
              {"blueprint", id(version_blueprint).c_str()},
              {"framework", framework.c_str()}
            });

  - id: page_changed
    mode: restart
    parameters:
      page: string
    then:
      - lambda: |-
          static const char *const TAG = "script.page_changed";

          // Go to boot page if not initiated
          if (page != "boot" and not nextion_init->state) disp1->goto_page("boot");
          // Reset globals
          if (page != "climate" &&
              page != "cover" &&
              page != "fan" &&
              page != "light" &&
              page != "media_player" &&
              page != "confirm" &&
              page != "keyb_num") {
              id(entity_id) = "";
          }
          if (page != "media_player") {
            id(last_volume_level) = 0;
            id(last_media_duration) = 0;
            id(last_media_position) = 0;
          }

          // Report new page to logs
          ESP_LOGD(TAG, "New page: %s", page.c_str());
          if (!id(entity_id).empty()) ESP_LOGD(TAG, "Entity shown: %s", id(entity_id).c_str());

          // Reset timers
          timer_reset_all->execute(page.c_str());

          // Report new page to Home Assistant
          ESP_LOGV(TAG, "Trigger HA event");
          auto ha_event = new esphome::api::CustomAPIDevice();
          ha_event->fire_homeassistant_event("esphome.nspanel_ha_blueprint",
            {
              {"type", "page_changed"},
              {"page", page.c_str()},
              {"entity", id(entity_id)}
            });

          // Report new page to add-ons
          ESP_LOGV(TAG, "Call add-ons scripts for new page");
          addon_climate_set_climate->execute(page == "climate" and id(entity_id) == "embedded_climate");

          // Call page constructor
          if (page == "boot") page_boot->execute(true);
          else if (page == "buttonpage01") page_buttonpage->execute(true, 1);
          else if (page == "buttonpage02") page_buttonpage->execute(true, 2);
          else if (page == "buttonpage03") page_buttonpage->execute(true, 3);
          else if (page == "buttonpage04") page_buttonpage->execute(true, 4);
          else if (page == "climate") page_climate->execute(true);
          else if (page == "confirm") page_confirm->execute(true);
          else if (page == "cover") page_cover->execute(true);
          else if (page == "entitypage01") page_entitypage->execute(true, 1);
          else if (page == "entitypage02") page_entitypage->execute(true, 2);
          else if (page == "entitypage03") page_entitypage->execute(true, 3);
          else if (page == "entitypage04") page_entitypage->execute(true, 4);
          else if (page == "fan") page_fan->execute(true);
          else if (page == "home") page_home->execute(true);
          else if (page == "keyb_num") page_keyb_num->execute(true);
          else if (page == "light") page_light->execute(true);
          else if (page == "media_player") page_media_player->execute(true);
          else if (page == "notification") page_notification->execute(true);
          else if (page == "qrcode") page_qrcode->execute(true);
          else if (page == "screensaver") page_screensaver->execute(true);
          else if (page == "settings") page_settings->execute(true);
          else if (page == "weather01") page_weather->execute(true, 1);
          else if (page == "weather02") page_weather->execute(true, 2);
          else if (page == "weather03") page_weather->execute(true, 3);
          else if (page == "weather04") page_weather->execute(true, 4);
          else if (page == "weather05") page_weather->execute(true, 5);

  - id: page_boot
    mode: restart
    parameters:
      construct_page: bool
    then:
      - lambda: |-
          static const char *const TAG = "script.page_boot";
          if (construct_page) {
            ESP_LOGV(TAG, "Construct boot page");
            if (current_page->state == "boot") {
              set_brightness->execute(100);

              std::string framework = "unknown";
              #ifdef ARDUINO
              framework = "arduino";
              #elif defined(USE_ESP_IDF)
              framework = "esp-idf";
              #endif
              disp1->set_component_text_printf("esph_version", "${version}");    // ESPHome version
              disp1->set_component_text_printf("framework", framework.c_str());  // ESPHome framework
              disp1->show_component("bt_reboot");
            }
          }

  - id: page_buttonpage
    mode: restart
    parameters:
      construct_page: bool
      page_number: uint
    then:
      - lambda: |-
          static const char *const TAG = "script.page_buttonpage";
          if (construct_page) {
            ESP_LOGV(TAG, "Construct button page");
            page_index_indicator->execute(page_number, 4);
          }

  - id: page_climate
    mode: restart
    parameters:
      construct_page: bool
    then:
      - lambda: |-
          static const char *const TAG = "script.page_climate";
          if (construct_page) {
            ESP_LOGV(TAG, "Construct climate page");
            disp1->set_component_text_printf("climate.button01_icon", "%s", "\uEE8D");  //mdi:calendar-sync
            disp1->set_component_text_printf("climate.button02_icon", "%s", "\uE069");  //mdi:autorenew
            disp1->set_component_text_printf("climate.button03_icon", "%s", "\uE237");  //mdi:fire
            disp1->set_component_text_printf("climate.button04_icon", "%s", "\uE716");  //mdi:snowflake
            disp1->set_component_text_printf("climate.button05_icon", "%s", "\uE58D");  //mdi:water-percent
            disp1->set_component_text_printf("climate.button06_icon", "%s", "\uE20F");  //mdi:fan
            disp1->set_component_text_printf("climate.button07_icon", "%s", "\uE424");  //mdi:power
          }
          addon_climate_update_page_climate->execute();

  - id: page_confirm
    mode: restart
    parameters:
      construct_page: bool
    then:
      - lambda: |-
          static const char *const TAG = "script.page_confirm";
          if (construct_page) {
            ESP_LOGV(TAG, "Construct confirm page");
          }

  - id: page_cover
    mode: restart
    parameters:
      construct_page: bool
    then:
      - lambda: |-
          static const char *const TAG = "script.page_cover";
          if (construct_page) {  // To do: Should be moved to Blueprint
            ESP_LOGV(TAG, "Construct cover page");
            disp1->set_component_text_printf("cover.cover_stop", "%s", "\uE666");   //mdi:stop-circle-outline
            // In the future this will be dynamically contructed based on the device_class
            disp1->set_component_text_printf("cover.cover_open", "%s", "\uF11D");   //mdi:window-shutter-open
            disp1->set_component_text_printf("cover.cover_close", "%s", "\uF11B");  //mdi:window-shutter
          }

  - id: page_entitypage
    mode: restart
    parameters:
      construct_page: bool
      page_number: uint
    then:
      - lambda: |-
          static const char *const TAG = "script.page_entitypage";
          if (construct_page) {
            ESP_LOGV(TAG, "Construct entity page");
            page_index_indicator->execute(page_number, 4);
          }

  - id: page_fan
    mode: restart
    parameters:
      construct_page: bool
    then:
      - lambda: |-
          static const char *const TAG = "script.page_fan";
          if (construct_page) {  // To do: Should be moved to Blueprint
            ESP_LOGV(TAG, "Construct fan page");
            disp1->set_component_text_printf("fan.button_on", "%s", "\uE20F");    //mdi:fan
            disp1->set_component_text_printf("fan.button_off", "%s", "\uE81C");   //mdi:fan-off
            disp1->set_component_text_printf("fan.button_up", "%s", "\uF46D");    //mdi:fan-chevron-up
            disp1->set_component_text_printf("fan.button_down", "%s", "\uF46C");  //mdi:fan-chevron-down
          }

  - id: page_home
    mode: restart
    parameters:
      construct_page: bool
    then:
      - lambda: |-
          static const char *const TAG = "script.page_home";
          if (construct_page) {
            ESP_LOGV(TAG, "Construct home page");
          }
          if (current_page->state == "home") {  // Is home page visible?
            ESP_LOGV(TAG, "Update home page");
            refresh_relays->execute();
            refresh_wifi_icon->execute();
            disp1->send_command_printf("is_notification=%i", (notification_text->state.empty() and notification_label->state.empty()) ? 0 : 1);
            set_component_color->execute("home.bt_notific", notification_unread->state ? id(home_notify_icon_color_unread) : id(home_notify_icon_color_normal), {});
            refresh_datetime->execute();
            addon_climate_update_page_home->execute();
          }

  - id: page_keyb_num
    mode: restart
    parameters:
      construct_page: bool
    then:
      - lambda: |-
          static const char *const TAG = "script.page_keyb_num";
          if (construct_page) {
            ESP_LOGV(TAG, "Construct keyb_num page");
            disp1->set_component_text_printf("keyb_num.bview", "%s", "\uE207");   //mdi:eye
            disp1->set_component_text_printf("keyb_num.bclose", "%s", "\uE158");  //mdi:close-circle
            disp1->set_component_text_printf("keyb_num.bclear", "%s", "\uE641");  //mdi:eraser-variant
            disp1->set_component_text_printf("keyb_num.benter", "%s", "\uE12B");  //mdi:check
          }

  - id: page_light
    mode: restart
    parameters:
      construct_page: bool
    then:
      - lambda: |-
          static const char *const TAG = "script.page_light";
          if (construct_page) {
            ESP_LOGV(TAG, "Construct light page");
          }

  - id: page_media_player
    mode: restart
    parameters:
      construct_page: bool
    then:
      - logger.log: Page media_player
      - lambda: |-
          static const char *const TAG = "script.page_media_player";
          if (construct_page) {  // To do: Should be moved to Blueprint
            ESP_LOGV(TAG, "Construct media_player page");
            disp1->set_component_text_printf("bt_on_off", "%s", "\uE424"); //mdi:power
            disp1->set_component_text_printf("bt_prev", "%s", "\uE4AD"); //mdi:skip-previous
            disp1->set_component_text_printf("bt_next", "%s", "\uE4AC"); //mdi:skip-next
            disp1->set_component_text_printf("bt_play_pause", "%s", "\uE40D"); //mdi:play-pause
            //disp1->set_component_text_printf("bt_stop", "%s", "\uE4DA"); //mdi:stop
            disp1->set_component_text_printf("bt_mute", "%s", "\uE75E"); //mdi:volume-mute
            disp1->set_component_text_printf("bt_vol_down", "%s", "\uE75D"); //mdi:volume-minus
            disp1->set_component_text_printf("bt_vol_up", "%s", "\uE75C"); //mdi:volume-plus
          }

  - id: page_notification
    mode: restart
    parameters:
      construct_page: bool
    then:
      - lambda: |-
          static const char *const TAG = "script.page_notification";
          if (construct_page) {
            ESP_LOGV(TAG, "Construct notification page");
            disp1->set_component_text_printf("notification.notifi_label", "%s", notification_label->state.c_str());
            display_wrapped_text->execute("notification.notifi_text01", notification_text->state.c_str(), id(display_mode) == 2 ? 23 : 32);
          }

  - id: page_qrcode
    mode: restart
    parameters:
      construct_page: bool
    then:
      - lambda: |-
          static const char *const TAG = "script.page_qrcode";
          if (construct_page) {
            ESP_LOGV(TAG, "Construct qrcode page");
          }

  - id: page_screensaver
    mode: restart
    parameters:
      construct_page: bool
    then:
      - lambda: |-
          static const char *const TAG = "script.page_screensaver";
          if (construct_page) {
            ESP_LOGV(TAG, "Construct screensaver page");
          }
          if (current_page->state == "screensaver") {  // Is screensaver page visible?
            ESP_LOGV(TAG, "Update screensaver page");
            int wakeup_page_id = 0;
            if (wakeup_page_name->state == "buttonpage01") wakeup_page_id = 12;
            else if (wakeup_page_name->state == "buttonpage02") wakeup_page_id = 13;
            else if (wakeup_page_name->state == "buttonpage03") wakeup_page_id = 14;
            else if (wakeup_page_name->state == "buttonpage04") wakeup_page_id = 15;
            else if (wakeup_page_name->state == "entitypage01") wakeup_page_id = 18;
            else if (wakeup_page_name->state == "entitypage02") wakeup_page_id = 19;
            else if (wakeup_page_name->state == "entitypage03") wakeup_page_id = 20;
            else if (wakeup_page_name->state == "entitypage04") wakeup_page_id = 21;
            else if (wakeup_page_name->state == "qrcode") wakeup_page_id = 17;
            else if (wakeup_page_name->state == "alarm") wakeup_page_id = 23;
            disp1->set_component_value("orign", wakeup_page_id);
          }

  - id: page_settings
    mode: restart
    parameters:
      construct_page: bool
    then:
      - lambda: |-
          static const char *const TAG = "script.page_settings";
          if (construct_page) {  // To do: Add timers on TFT?
            ESP_LOGV(TAG, "Construct settings page");
            //disp1->set_component_text_printf("bt_sleep", "%s", (id(sleep_mode).state) ? "\uEA19" : "\uEA18"); //mdi:toggle-switch-outline or mdi:toggle-switch-off-outline
            disp1->hide_component("lbl_sleep");
            disp1->hide_component("bt_sleep");
          }

  - id: page_weather
    mode: restart
    parameters:
      construct_page: bool
      page_number: uint
    then:
      - lambda: |-
          static const char *const TAG = "script.page_weather";
          if (construct_page) {
            ESP_LOGV(TAG, "Construct weather page");
            page_index_indicator->execute(page_number, 5);
          }

  - id: page_index_indicator
    mode: restart
    parameters:
      page_number: uint
      page_total: uint
    then:
      - lambda: |-
          static const char *const TAG = "script.page_index_indicator";
          ESP_LOGV(TAG, "Show page number indicator");
          std::string indicator = "";
          for (int i = 0; i < page_total; ++i) {
              if (i == page_number - 1) {
                  indicator += "●";
              } else {
                  indicator += "○";
              }
          }
          disp1->set_component_text_printf("page_index", "%s", indicator.c_str());

  - id: exit_reparse
    mode: restart
    then:
      - logger.log: "Exit reparse"
      - uart.write:
          id: tf_uart
          data: "DRAKJHSUYDGBNCJHGJKSHBDN"
      - uart.write:
          id: tf_uart
          data: [0xFF, 0xFF, 0xFF]

  - id: boot_sequence
    mode: restart
    then:
      - lambda: |-
          static const char *const TAG = "script.boot_sequence";
          ESP_LOGD(TAG, "Starting boot sequence");
          ESP_LOGD(TAG, "Wait for TFT version");
      - wait_until:
          - lambda: !lambda return !id(version_tft).empty();
      - lambda: |-
          static const char *const TAG = "script.boot_sequence";
          ESP_LOGD(TAG, "TFT version: %s", id(version_tft).c_str());
          if (current_page->state == "boot") {
            disp1->send_command_printf("tm_esphome.en=0");
            disp1->send_command_printf("tm_pageid.en=0");
            page_boot->execute(true);
          }
          timer_reset_all->execute("boot");
      - lambda: |-
          static const char *const TAG = "script.boot_sequence";
          ESP_LOGD(TAG, "Wait for API");
      - wait_until:
          api.connected
      - lambda: |-
          static const char *const TAG = "script.boot_sequence";
          if (current_page->state == "boot") {
            ESP_LOGD(TAG, "Publish IP address");
            disp1->set_component_text_printf("boot.ip_addr", "%s", network::get_ip_address().str().c_str());
            set_brightness->execute(100);
          }
          ESP_LOGD(TAG, "Report to Home Assistant");
          auto ha_event = new esphome::api::CustomAPIDevice();
          ha_event->fire_homeassistant_event("esphome.nspanel_ha_blueprint",
            {
              {"type", "boot"},
              {"step", "start"}
            });
          delay(1000);
          // Set dimming values
          display_brightness->publish_state(id(display_brightness_global));
          display_dim_brightness->publish_state(id(display_dim_brightness_global));
          disp1->send_command_printf("brightness=%i", id(display_brightness_global));
          disp1->send_command_printf("settings.brightslider.val=%i", id(display_brightness_global));
          disp1->send_command_printf("brightness_dim=%i", id(display_dim_brightness_global));
          disp1->send_command_printf("settings.dimslider.val=%i", id(display_dim_brightness_global));
          set_brightness->execute(id(display_brightness_global));
          ESP_LOGD(TAG, "Report to Home Assistant");
          nextion_init->publish_state(true);
          //auto ha_event = new esphome::api::CustomAPIDevice();
          ha_event->fire_homeassistant_event("esphome.nspanel_ha_blueprint",
            {
              {"type", "boot"},
              {"step", "nextion_init"}
            });
          id(home_relay1_icon) = "\uE3A5";
          id(home_relay1_icon) = "\uE3A8";
          timer_reset_all->execute("boot");
          notification_clear->execute();
          ESP_LOGD(TAG, "Boot sequence finished!");

  - id: notification_clear
    mode: restart
    then:
      - lambda: |-
          disp1->send_command_printf("is_notification=0");
          if (current_page->state == "home") disp1->hide_component("bt_notific");
          notification_label->publish_state("");
          notification_text->publish_state("");
          notification_unread->turn_off();

  ##### ADD-ONS ############################################################
  ##### Add-on - Climate #####
  - id: addon_climate_service_call
    mode: restart
    parameters:
      key: string
      value: string
    then:
      # Reserved for Add-on Climate
      - lambda: |-
          ESP_LOGV("script.addon_climate_service_call", "Check for addon_climate");
  - id: addon_climate_update_page_home
    mode: restart
    then:
      # Reserved for Add-on Climate
      - lambda: |-
          ESP_LOGV("script.addon_climate_update_page_home", "Check for addon_climate");
  - id: addon_climate_set_climate
    mode: restart
    parameters:
      embedded_climate: bool
    then:
      # Reserved for Add-on Climate
      - lambda: |-
          ESP_LOGV("script.addon_climate_set_climate", "Check for addon_climate");
          ESP_LOGV("script.addon_climate_set_climate", "embedded_climate: %i", (embedded_climate) ? 1 : 0);
  - id: addon_climate_update_page_climate
    mode: restart
    then:
      # Reserved for Add-on Climate
      - lambda: |-
          ESP_LOGV("script.addon_climate_update_page_climate", "Check for addon_climate");
  - id: addon_climate_set_climate_friendly_name
    mode: restart
    parameters:
      friendly_name: string
    then:
      # Reserved for Add-on Climate
      - lambda: |-
          ESP_LOGV("script.addon_climate_set_climate_friendly_name", "Check for addon_climate");
          ESP_LOGV("script.addon_climate_set_climate_friendly_name", "friendly_name: %s", friendly_name.c_str());