---
substitutions:
  device_name: nspanel
  wifi_ssid: "nspanel"
  wifi_password: "NSPanel_HA_Blueprint"
  nextion_blank_url: "http://homeassistant.local:8123/local/nspanel_blank.tft"

packages:
  basic_package: !include ../nspanel_esphome.yaml  # Core package
  advanced_package: !include ../esphome/nspanel_esphome_advanced.yaml
  addon_climate_heat: !include ../esphome/nspanel_esphome_addon_climate_heat.yaml

esp32:
  framework:
    type: arduino

##### Customizations from Wiki #####
api:
  # Encrypt the communication between ESPHome and Home Assistant
  encryption:
    key: !secret api_encryption_key
  # Reboot if HA is not connected for 15 minutes
  reboot_timeout: 15min

binary_sensor:
  # Is display awake?
  - name: ${device_name} Display state
    id: display_state
    platform: template
    lambda: |-
      return (current_page->state != "screensaver");

button:
  # Adds a button to put the panel to sleep
  - name: ${device_name} Sleep
    id: force_sleep
    platform: template
    icon: mdi:sleep
    on_press:
      then:
        - logger.log: Button Sleep pressed
        - lambda: |-
            goto_page->execute("screensaver");

  # Adds a button to wake-up the panel (similar to the existing service)
  - name: ${device_name} Wake-up
    id: force_wake_up
    platform: template
    icon: mdi:alarm
    on_press:
      then:
        - logger.log: Button Wake-up pressed
        - lambda: |-
            if (current_page->state == "screensaver") id(disp1).goto_page(id(wakeup_page_name).state.c_str());
            // timer_page->execute(); // enable this if you want page timeout to be reset
            timer_sleep->execute();
            timer_dim->execute();

# Add custom presets to your climate (heat in this example)
climate:
  - id: !extend thermostat_embedded
    heat_deadband: 0.3
    heat_overrun: 0.0
    default_preset: "Home"
    preset:
      - name: "Off"
        default_target_temperature_low: ${temp_min} ${temp_units}
        mode: "off"
      - name: Home
        default_target_temperature_low: 21 ${temp_units}
        mode: "heat"
      - name: Away
        default_target_temperature_low: 16.5 ${temp_units}
        mode: "heat"
      - name: Sleep
        default_target_temperature_low: 17.5 ${temp_units}
        mode: "heat"

esphome:
  # change OTA password, remove after flashing
  on_boot:
    - priority: 601.0
      then:
        - lambda: |-
            id(my_ota).set_auth_password("New password");
  # Limit the amount of resources used for compiling
  compile_process_limit: 1

light:
  # Add the display as a light in Home Assistant
  - name: ${device_name} Display
    id: display_light
    icon: mdi:tablet-dashboard
    platform: monochromatic
    output: display_output
    default_transition_length: 0s
    on_turn_on:
      then:
        - lambda: |-
            ESP_LOGD("light.display_light", "Turn-on");
            if (current_page->state == "screensaver") disp1->goto_page(wakeup_page_name->state.c_str());
            timer_reset_all->execute();
    on_turn_off:
      then:
        - lambda: |-
            ESP_LOGD("light.display_light", "Turn-off");
            goto_page->execute("screensaver");

logger:
  # Enable hardware UART serial logging
  baud_rate: 115200

ota:
  # change OTA password, remove after flashing
  password: !secret wifi_password
  id: my_ota

output:
  # Output required by `display_light` to send the commands to Nextion
  - id: display_output
    platform: template
    type: float
    write_action:
      - lambda: |-
          ESP_LOGV("output.display_output", "state: %f", state);
          uint8_t current_brightness = int(round(display_light->current_values.is_on() ? (display_light->current_values.get_brightness() * 100.0f) : 0.0));
          ESP_LOGV("output.display_output", "current_brightness: %i%%", current_brightness);
          set_brightness->execute(current_brightness);

script:
  # Updates the existing `page_changed` script to update the `display_light` status when a page changes
  - id: !extend page_changed
    then:
      - lambda: |-
          ESP_LOGD("script.page_changed(custom)", "page: %s", current_page->state.c_str());
          ESP_LOGV("script.page_changed(custom)", "is_on(): %s", display_light->current_values.is_on() ? "True" : "False");
          if (current_page->state == "screensaver" and display_light->current_values.is_on()) {
            auto call = display_light->turn_off();
            call.perform();
          } else if (current_page->state != "screensaver" and (not display_light->current_values.is_on())) {
            auto call = display_light->turn_on();
            call.perform();
          }

  # Updates the existing `set_brightness` script to update the `display_light` status when a new brightness level is set
  - id: !extend set_brightness
    then:
      - lambda: |-
          ESP_LOGD("script.set_brightness(custom)", "brightness: %.0f%%", brightness);
          uint8_t current_light_brightness = int(round(display_light->current_values.is_on() ? (display_light->current_values.get_brightness() * 100.0f) : 0.0));
          ESP_LOGV("script.set_brightness(custom)", "current_light_brightness: %i%%", current_light_brightness);
          if (brightness != current_light_brightness) {
            if (current_page->state != "screensaver" and brightness > 0) {
              auto call = display_light->turn_on();
              call.set_brightness(current_brightness->state / 100.0f);
              call.perform();
            } else if (display_light->current_values.is_on()) {
              auto call = display_light->turn_off();
              call.set_brightness(0);
              call.perform();
            }
          }

time:
  - id: !extend time_provider
    timezone: "America/Cancun"
    # Use my own local network time server
    platform: sntp
    servers:
      - !secret mysntpserver
      - europe.pool.ntp.org
      - 0.pool.ntp.org
    # Scheduled relay
    on_time:
      - hours: 7
        minutes: 30
        seconds: 0
        then:
          - switch.turn_on: relay_1
      - hours: 12
        minutes: 15
        seconds: 0
        then:
          - switch.turn_off: relay_1
      - hours: 19
        minutes: 30
        seconds: 0
        then:
          - switch.turn_on: relay_1
      - hours: 23
        minutes: 30
        seconds: 0
        then:
          - switch.turn_off: relay_1
      # Scheduled climate
      - hours: 7
        minutes: 0
        seconds: 0
        then:
          - climate.control:
              id: thermostat_embedded
              mode: auto
              target_temperature: 22°C
      - hours: 19
        minutes: 0
        seconds: 0
        then:
          - climate.control:
              id: thermostat_embedded
              mode: auto
              target_temperature: 20°C
      - hours: 23
        minutes: 0
        seconds: 0
        then:
          - climate.control:
              id: thermostat_embedded
              mode: auto
              target_temperature: 18°C

web_server:
  # Custom web server credentials
  auth:
    username: !secret web_server_username
    password: !secret web_server_password

wifi:
  networks:
    - id: !extend wifi_default
      # Set IP address manually
      manual_ip:
        static_ip: 192.168.0.123
        gateway: 192.168.0.1
        subnet: 255.255.255.0
      # Set dual network
      priority: 10
    - ssid: !secret wifi_ssid_backup
      password: !secret wifi_password_backup
      priority: 0
...