* Performance improvements
The main focus here was to reduce the number of calls between Home Assistant and ESPHome, moving logic as much as possible to TFT and ESPHome.
- Service calls moved to ESPHome (in preparation for Alarm Control Panel)
- Page change informed via event call instead of `nspanel_event` sensor (which still in use by other calls, but might be possible to remove in the future)
* Draft embedded climate
This adds an initial version of an embedded climate/thermostat (heating only for now) with support for local control even with Wi-Fi out.
Solves #646
Solves #263
* Update ReleaseNotes.md
* Fix climate slider
Fix for climate slider opening in an incorrect position and sending only the integer part of the new target temperature
* Moving home page to ESPHome
In progress...
* Fix translations - Dutch
* Embedded chip 3
Home page - Chip 3 will be controlled locally when embedded climate is enable.
* Fixed buttons bar
Fixed buttons bar managed on ESPHome when embedded climate is visible.
* Panel offline mode
Introduces "offline mode" for the panel, which will be used later with a fallback climate.
Pages that are depending on the blueprint (buttons pages, entity pages, settings pages, etc) won't be shown when the API is disconnected.
* Panel offline mode
* Panel offline mode
* Panel offline mode
* Panel offline mode
* Add Fan speed settings page
Add an initial fan speed control page for fans supporting speed control.
Add speed (%) info in the buttons pages.
Solves #404
Solves #791
Solves https://github.com/Blackymas/NSPanel_HA_Blueprint/discussions/718#discussioncomment-5786106
* Add Fan speed settings page
* Add Fan speed settings page
* Add Fan speed settings page
* Add Fan speed settings page
* Add Fan speed settings page
* Limit light to supported settings
When showing light settings, only the supported features will be shown for each light.
* Limit light to supported settings
* Limit light to supported settings
* Limit light to supported settings
* Limit light to supported settings
* Limit light to supported settings
This partially solves #635
* Limits covers to supported settings
Only show cover settings when `set_position` is supported.
This solves #635
* Limits covers to supported settings
* Move `entity` variable to home page
This will enable future development of a fallback climate
* Move `entity` variable to home page
* Move `entity` variable to home page
* Move `entity` variable to home page
* Move `entity` variable to home page
* Remove `settings_entity`
- Bump version to 3.5_dev
- Removed references to pictures removed from TFT
- Removed code related to closing settings pages
- Removed trigger `settings_entity`
* Removed `set_settings_entity` service
- Bump version to 3.5_dev
- Removed `set_settings_entity` service - BREAKING CHANGE
- Removed `settings_entity` text-sensor - BREAKING CHANGE
- Added service `open_entity_settings_page` - BREAKING CHANGE
* Removed `settings_entity`
- Bump version to 3.5_dev
- Removed old climate page (climate_backup)
- Removed pics related to old climate page (ids 16-47, 80-83, 95-96 and 125(US only))
- Enforces brightness on any page change (this allows wake-up on settings page with long press on physical buttons) - Pending removing code from Blueprint
- Added `entity` variable on pages `climate`, `lightsettings` and `coversettings`
- Added `entity` info to `nspanelevent` on pages `climate`, `lightsettings` and `coversettings`
- Added `back_page` variable on pages `climate`, `lightsettings` and `coversettings` (default: home)
- Moving to TFT close page logic on pages `climate`, `lightsettings` and `coversettings` - Pending changes on Blueprint and ESPHome
- Standardized name for `page_label` on pages `climate`, `lightsettings` and `coversettings`
- Standardized settings page names: `climate`, `cover` and `light` (Removed `settings` from page name)
* Removed `settings_entity`
* Removed `settings_entity`
* Removed `settings_entity`
* Climate - Custom buttons - Long press
This add long press functionality to Custom buttons and also fix a bug on short press.
I believe the new custom page is ready for get user's feedback with this.
* Climate - Custom buttons - Long press
* Climate - Custom buttons - Long press
* Climate - Custom buttons - Long press
* Climate page - Performance & bug fix
Performance improvement:
- Moved icon definition to TFT, so only buttons related to supported hvac modes will be updated and just icon color and link enabling is sent.
Bug fixing:
- Removed incorrect button name on buttons update
Others:
- Merged `set_climate_target_temp` into `set_climate` services
- Update current temperature when target temperature is updated
* Removed reference to `set_climate_target_temp`
Removed unused entry from blueprint.
* Removed service `set_climate_target_temp`
* Update `nspanel_eu`
- Set climate buttons on the TFT.
- Bump version to 3.3.2 (temporarily, to align with ESPHome and Blueprint)
* Update `nspanel_eu_code`
* Climate: support to `target_temp_step`
Adding support to attribute `target_temp_step` to define the step of changing temperature.
`0.5` will be used if this attribute is not available on the climate entity.
* Update nspanel_esphome.yaml
* Update nspanel_eu files
* Update nspanel_eu_code files
* 2sec hold for sending target_temp
Added 2sec hold of `target_temp` value before sending it to ESPHome and Blueprint, so the climate service is not called at every click on the slider or +/-.
* Update nspanel_eu_code
* Fix buttons on climate page
Fix icon for dry and auto.
Move Off for last position.
Fix TFT sending incorrect id for buttons.
* Update TFT
* Update nspanel_eu_code
* Move target_temp set to TFT
Use TFT to set target temp from slider and +/-.
Using decimals for slider.
* Update nspanel_esphome.yaml
* Update nspanel_eu files
* update nspanel_eu_code folder
