Moving service calls back to the blueprint as latest HA requires user's permissions to call HA services from ESPHome.
This still have to be used for Alarm calls due to security concerns.
* Performance improvements
The main focus here was to reduce the number of calls between Home Assistant and ESPHome, moving logic as much as possible to TFT and ESPHome.
- Service calls moved to ESPHome (in preparation for Alarm Control Panel)
- Page change informed via event call instead of `nspanel_event` sensor (which still in use by other calls, but might be possible to remove in the future)
* Draft embedded climate
This adds an initial version of an embedded climate/thermostat (heating only for now) with support for local control even with Wi-Fi out.
Solves #646
Solves #263
* Update ReleaseNotes.md
* Fix climate slider
Fix for climate slider opening in an incorrect position and sending only the integer part of the new target temperature
* Moving home page to ESPHome
In progress...
* Fix translations - Dutch
* Embedded chip 3
Home page - Chip 3 will be controlled locally when embedded climate is enable.
* Fixed buttons bar
Fixed buttons bar managed on ESPHome when embedded climate is visible.
We are trying to make your panel as autonomous as possible by moving some of the controls from the Blueprint to ESPHome. This will reduce the load in your network and Home Assistant, but also will make a more reliable system capable to do it's core functionality even when the network is unavailable or Home Assistant is restarting.
With this version, the following engines have been moved to your panel (local control):
- Physical relay control (when hardware left button is connected to relay 1 or right button to relay 2)
Solves #910
The boot page will retry communication with the blueprint once a minute to avoid the situation where that page is shown until the automation is reloaded.
* Select wake-up page
Users will be able to select the wake-up page on the blueprint inputs.
This selected page will be shown after a boot (after the boot page) and with a touch in the screen when on screen saver page.
After showing this wake-up page, all the previous behavior for closing the page (with a click or after a timeout) will be the same.
Solves #576
Solves #612
Solves #801
Probably improves for https://github.com/Blackymas/NSPanel_HA_Blueprint/discussions/718#discussioncomment-5715670
* Select wake-up page
Fix the entity name on the confirmation page.
The new order is:
1. Name set on the blueprint settings
2. Entity's `friendly_name` attribute
3. Entity's `name` attribute
4. Entity's `entity_id`
Solves #501
* Add Fan speed settings page
Add an initial fan speed control page for fans supporting speed control.
Add speed (%) info in the buttons pages.
Solves #404
Solves #791
Solves https://github.com/Blackymas/NSPanel_HA_Blueprint/discussions/718#discussioncomment-5786106
* Add Fan speed settings page
* Add Fan speed settings page
* Add Fan speed settings page
* Add Fan speed settings page
* Add Fan speed settings page
* Limit light to supported settings
When showing light settings, only the supported features will be shown for each light.
* Limit light to supported settings
* Limit light to supported settings
* Limit light to supported settings
* Limit light to supported settings
* Limit light to supported settings
This partially solves #635
* Limits covers to supported settings
Only show cover settings when `set_position` is supported.
This solves #635
* Limits covers to supported settings
This adds support to weather integrations where the `datetime` field under `forecast` attribute is provided as a `datetime` type.
This was seen on Météo-France, while all other weather integrations tested so far used a `text` field for `datetime`.
This solves #893
* Use `en` as fallback language
Uses English if a non valid language is selected (like when using legacy language selection).
* Use `en` as fallback language
* Move `entity` variable to home page
This will enable future development of a fallback climate
* Move `entity` variable to home page
* Move `entity` variable to home page
* Move `entity` variable to home page
* Move `entity` variable to home page
* Remove `settings_entity`
- Bump version to 3.5_dev
- Removed references to pictures removed from TFT
- Removed code related to closing settings pages
- Removed trigger `settings_entity`
* Removed `set_settings_entity` service
- Bump version to 3.5_dev
- Removed `set_settings_entity` service - BREAKING CHANGE
- Removed `settings_entity` text-sensor - BREAKING CHANGE
- Added service `open_entity_settings_page` - BREAKING CHANGE
* Removed `settings_entity`
- Bump version to 3.5_dev
- Removed old climate page (climate_backup)
- Removed pics related to old climate page (ids 16-47, 80-83, 95-96 and 125(US only))
- Enforces brightness on any page change (this allows wake-up on settings page with long press on physical buttons) - Pending removing code from Blueprint
- Added `entity` variable on pages `climate`, `lightsettings` and `coversettings`
- Added `entity` info to `nspanelevent` on pages `climate`, `lightsettings` and `coversettings`
- Added `back_page` variable on pages `climate`, `lightsettings` and `coversettings` (default: home)
- Moving to TFT close page logic on pages `climate`, `lightsettings` and `coversettings` - Pending changes on Blueprint and ESPHome
- Standardized name for `page_label` on pages `climate`, `lightsettings` and `coversettings`
- Standardized settings page names: `climate`, `cover` and `light` (Removed `settings` from page name)
* Removed `settings_entity`
* Removed `settings_entity`
* Removed `settings_entity`
Removed all inputs related to customization of chip03 (Climate entity) and instead will follow the same icons and colors used by page climate, with a thermometer replacing the fire icon for heating.
* Fix `hvac_action` indication icons
Fix for pages home and climate.
This should remove the need for all the 25~30 instances of hot water in the code.
* Update nspanel_esphome.yaml
* Climate - Custom buttons - Long press
This add long press functionality to Custom buttons and also fix a bug on short press.
I believe the new custom page is ready for get user's feedback with this.
* Climate - Custom buttons - Long press
* Climate - Custom buttons - Long press
* Climate - Custom buttons - Long press
* Climate page - Performance & bug fix
Performance improvement:
- Moved icon definition to TFT, so only buttons related to supported hvac modes will be updated and just icon color and link enabling is sent.
Bug fixing:
- Removed incorrect button name on buttons update
Others:
- Merged `set_climate_target_temp` into `set_climate` services
- Update current temperature when target temperature is updated
* Removed reference to `set_climate_target_temp`
Removed unused entry from blueprint.
* Removed service `set_climate_target_temp`
* Update `nspanel_eu`
- Set climate buttons on the TFT.
- Bump version to 3.3.2 (temporarily, to align with ESPHome and Blueprint)
* Update `nspanel_eu_code`
* Climate: support to `target_temp_step`
Adding support to attribute `target_temp_step` to define the step of changing temperature.
`0.5` will be used if this attribute is not available on the climate entity.
* Update nspanel_esphome.yaml
* Update nspanel_eu files
* Update nspanel_eu_code files
* Fix buttons on climate page
Fix icon for dry and auto.
Move Off for last position.
Fix TFT sending incorrect id for buttons.
* Update TFT
* Update nspanel_eu_code
* Move target_temp set to TFT
Use TFT to set target temp from slider and +/-.
Using decimals for slider.
* Update nspanel_esphome.yaml
* Update nspanel_eu files
* update nspanel_eu_code folder
* New climate page - basic support
Basic support to the new climate page.
Still pending values and buttons.
* Support to new climate services
* New climate page - basic
