From 085fc0beb46f078f5582417b31c492988cbcc6ad Mon Sep 17 00:00:00 2001 From: Jaap P Date: Thu, 9 May 2024 13:58:09 +0200 Subject: [PATCH] Update install.md Add picture showing how to lift the circuit board --- docs/install.md | 1 + 1 file changed, 1 insertion(+) diff --git a/docs/install.md b/docs/install.md index 195fc30..237838b 100644 --- a/docs/install.md +++ b/docs/install.md @@ -209,6 +209,7 @@ This connection is necessary to put the ESP32 into firmware transfer mode. Using a voltage higher than 3.3VDC, such as 5VDC, can damage your panel. 4. To avoid short circuits, consider moving the panel's board away from the metal backing of the display. The use of a non-conductive tool, like the blue plastic one shown in the picture, can be helpful. +![114730547 MP](https://github.com/Blackymas/NSPanel_HA_Blueprint/assets/5879533/575bc3de-a2ae-4440-a420-751325e55122) 5. Note the cross-connection of `RX` and `TX` pins. The following pin-out should be used: