diff --git a/docs/install.md b/docs/install.md index 1e56bc3..8258118 100644 --- a/docs/install.md +++ b/docs/install.md @@ -8,7 +8,7 @@ Let’s embark on this journey together to create a smart home that’s uniquely > [!TIP] -> For troubleshooting TFT transfer issues, the most popular topic for new sers, please consult our [TFT Transfer Troubleshooting Guide](tft_upload.md). +> For troubleshooting TFT transfer issues, the most popular topic for new users, please consult our [TFT Transfer Troubleshooting Guide](tft_upload.md). > [!NOTE] > We encourage users with absolute beginner-level knowledge in Home Assistant, ESPHome, or YAML editing to familiarize themselves with the basics of these platforms. @@ -60,6 +60,12 @@ To flash your NSPanel, ESPHome firmware is required. ESPHome can be integrated into your setup in various ways, including as a Home Assistant add-on or through a local installation on your computer. This guide is based on using the ESPHome dashboard, which is available in all standard implementations. +> [!NOTE] +> 4GB of memory are recommended if you are installing ESPHome as a Home Assistant add-on. +Therefore, a RasPi 4 with 4GB RAM is the minimum if you are using a Raspberry Pi. +A manual installation requires at least 2GB of memory and 500MB of swap space or 3GB of memory. +With less memory the compiler will crash! + - **Installing ESPHome as a Home Assistant Add-On**: For seamless integration with Home Assistant, ESPHome can be installed as an add-on. This method provides an easy-to-navigate interface and direct integration with your Home Assistant setup. For detailed instructions on this installation method, refer to [Getting Started with ESPHome and Home Assistant](https://esphome.io/guides/getting_started_hassio).