Merge pull request #38 from deejaybeam/dev

upd: set thermostat_cycle

blueprint.yaml

@@ -767,6 +767,7 @@ variables:
   command_printf: "esphome.{{ nspanel_name }}_send_command_printf"
   command_font_color: "esphome.{{ nspanel_name }}_send_command_font_color"
   command_background_color: "esphome.{{ nspanel_name }}_send_command_background_color"
+  command_thermostat_cycle: "esphome.{{ nspanel_name }}_send_thermostat_cycle_state"
 
   ###### SYNC SETTINGS #####
   delay_boot: !input "delay"
@@ -4473,28 +4474,25 @@ action:
               - conditions: '{{ trigger.event.data.new_state.state == page_climate }}'
                 alias: 'climate page'
                 sequence:
-                  - choose:
+                  - variables:
-                    - conditions: '{{ outdoortemp is match "sensor." }}'
+                      target_temp: "{{state_attr(climate, 'temperature') | round(1)}}"
-                      alias: 'outdoor-sensor'
+                      hvac_mode: "{{ states(climate) }}"
-                      sequence:
+                      outdoor_temp: >-
+                        {%- if outdoortemp is match "sensor." -%} {{ states(outdoortemp) |round(0) }}
+                        {%- elif weather == "Default" -%} {{state_attr(ha_weather,"temperature") | round(0)}}
+                        {%- elif weather == "AccuWeather" -%} {{state_attr(accuweather_value,"temperature") | round(0)}}
+                        {%- endif -%}
+                      heating_state: >-
+                        {%- if hvac_mode == "off" and language == "DE" -%} aus
+                        {%- elif hvac_mode == "off" and language == "EN" -%} off
+                        {%- elif hvac_mode != "off" and language == "DE" -%} heizen
+                        {%- elif hvac_mode != "off" and language == "EN" -%} heat
+                        {%- endif -%}
+
                   - service: "{{ command_text_printf }}"
                     data:
                       component: outdoor_temp
-                            message: "{{ states(outdoortemp) |round(0) }}°"
+                      message: "{{ outdoor_temp }}°"
-                    - conditions: '{{ weather == "Default" }}'
-                      alias: 'default-weather'
-                      sequence:
-                        - service: "{{ command_text_printf }}"
-                          data:
-                            component: outdoor_temp
-                            message: '{{state_attr(ha_weather,"temperature") | round(0)}}°'
-                    - conditions: '{{ weather == "AccuWeather" }}'
-                      alias: 'AccuWeather'
-                      sequence:
-                        - service: "{{ command_text_printf }}"
-                          data:
-                            component: outdoor_temp
-                            message: '{{state_attr(accuweather_value,"temperature") | round(0)}}°'
                   - service: "{{ command_text_printf }}"
                     data:
                       component: current_temp
@@ -4502,7 +4500,14 @@ action:
                   - service: "{{ command_text_printf }}"
                     data:
                       component: target_temp
-                      message: "{{state_attr(climate, 'temperature') | round(0)}}°"
+                      message: "{{target_temp}}°"
+                  - service: "{{ command_thermostat_cycle }}"
+                    data:
+                      value: "{{target_temp}}"
+                  - service: "{{ command_text_printf }}"
+                    data:
+                      component: thermostat.heating_state
+                      message: "{{heating_state}}"
                   - if:
                       - condition: template
                         value_template: '{{ hotwatertemp is match "sensor." }}'
@@ -4512,6 +4517,7 @@ action:
                           component: climate.hotwater_temp
                           message: "{{ states(hotwatertemp) |round(1) }}°"
 
+
               ## settings ## 
               - conditions: '{{ trigger.event.data.new_state.state == page_settings }}'
                 sequence:

esphome.yaml

@@ -175,6 +175,143 @@ api:
               switch.is_on: nextion_init
         - lambda: 'id(disp1).set_component_background_color(component.c_str(), message);'
 
+    #### Service to send thermostat cycle state ####
+    - service: send_thermostat_cycle_state
+      variables:
+        value: float
+      then:
+        - wait_until:
+              switch.is_on: nextion_init
+        - lambda: |-
+            //ESP_LOGD("nextion", "thermostat sendig value %f", value);
+            int left=16; // 16 is empty left.
+            int mid=17; // 17 is empty mid.
+            int right=18; // 18 is empty right.
+            if (value < 13.5) {
+              left=16;
+              mid=17;
+              right=18;
+            } else if (value >= 13.5 and value < 14) {
+              left=19;
+              mid=17;
+              right=18;
+            } else if (value >= 14 and value < 14.5) {
+              left=20;
+              mid=17;
+              right=18;
+            } else if (value >= 14.5 and value < 15) {
+              left=21;
+              mid=17;
+              right=18;
+            } else if (value >= 15 and value < 15.5) {
+              left=22;
+              mid=17;
+              right=18;
+            } else if (value >= 15.5 and value < 16) {
+              left=23;
+              mid=17;
+              right=18;
+            } else if (value >= 16 and value < 16.5) {
+              left=24;
+              mid=17;
+              right=18;
+            } else if (value >= 16.5 and value < 17) {
+              left=25;
+              mid=17;
+              right=18;
+            } else if (value >= 17 and value < 17.5) {
+              left=26;
+              mid=17;
+              right=18;
+            } else if (value >= 17.5 and value < 18) {
+              left=27;
+              mid=17;
+              right=18;
+            } else if (value >= 18 and value < 18.5) {
+              left=28;
+              mid=17;
+              right=18;
+            } else if (value >= 18.5 and value < 19) {
+              left=29;
+              mid=30;
+              right=18;
+            } else if (value >= 19 and value < 19.5) {
+              left=29; 
+              mid=31;
+              right=18;
+            } else if (value >= 19.5 and value < 20) {
+              left=29;
+              mid=32;
+              right=18;
+            } else if (value >= 20 and value < 20.5) {
+              left=29;
+              mid=33;
+              right=18;
+            } else if (value >= 20.5 and value < 21) {
+              left=29;
+              mid=34;
+              right=18;
+            } else if (value >= 21 and value < 21.5) {
+              left=29;
+              mid=35;
+              right=18;
+            } else if (value >= 21.5 and value < 22) {
+              left=29;
+              mid=36;
+              right=18;
+            } else if (value >= 22 and value < 22.5) {
+              left=29;
+              mid=37;
+              right=38;
+            } else if (value >= 22.5 and value < 23) {
+              left=29;
+              mid=37;
+              right=39;
+            } else if (value >= 23 and value < 23.5) {
+              left=29;
+              mid=37;
+              right=40;
+            } else if (value >= 23.5 and value < 24) {
+              left=29;
+              mid=37;
+              right=41;
+            } else if (value >= 24 and value < 24.5) {
+              left=29;
+              mid=37;
+              right=42;
+            } else if (value >= 24.5 and value < 25) {
+              left=29;
+              mid=37;
+              right=43;
+            } else if (value >= 25 and value < 25.5) {
+              left=29;
+              mid=37;
+              right=44;
+            } else if (value >= 25.5 and value < 26) {
+              left=29;
+              mid=37;
+              right=45;
+            } else if (value >= 26 and value < 26.5) {
+              left=29;
+              mid=37;
+              right=46;
+            } else if (value >= 26.5 and value < 27) {
+              left=29;
+              mid=37;
+              right=47;
+            } else if (value >= 27) {
+              left=29;
+              mid=37;
+              right=48;
+            }
+            // sends the 3 images to the display
+            //ESP_LOGD("nextion", "thermostat left %i", left);
+            //ESP_LOGD("nextion", "thermostat mid %i", mid);
+            //ESP_LOGD("nextion", "thermostat right %i", right);
+            id(disp1).send_command_printf("climate_left.pic=%i", left);
+            id(disp1).send_command_printf("climate_middle.pic=%i", mid);
+            id(disp1).send_command_printf("climate_right.pic=%i", right);
+
 
 ##### START - GLOBALS CONFIGURATION #####
 globals: