Revert "Remove esp-idf"

This reverts commit 58d86aeb86.

ReleaseNotes.md

@@ -76,13 +76,11 @@ packages:
 6. Buttons now will run an automation
 <br>On the previous versions, a button with an automation will enable or disable the automation. Now the button will trigger the automation.
 <br>If you want the legacy behavior, please create a script to enable/disable the automation and assign this to your button. 😉
-7. ESP-IDF IS TEMPORARILY UNAVAILABLE
-
 &nbsp;
 ## Overview of noteworthy changes
 1. New Upload TFT engine
 2. Hardware restarts with button hold for 15s
-3. ~~Support to `esp-idf` framework~~
+3. Support to `esp-idf` framework
 4. Support to 921600 bps
 5. Font size for chips
 6. Short click to open Climate and Media Player
@@ -119,18 +117,16 @@ Now if you press the hardware buttons for more than 15s, the panel will act as t
 | Right | Restarts the panel | It is equivalent to press the "Restart" button on the Settings page or from Home Assistant, but is available even when the Wi-Fi isn't connected or Home Assistant is out. |
 
 &nbsp;
-### 3. ~~Support to `esp-idf` framework~~
+### 3. Support to `esp-idf` framework
-~~Although this project still using ESPHome default framework (currently `arduino`), we started supporting the framework `esp-idf` as this is a recomendation from ESPHome team since an year ago or so.~~
+Although this project still using ESPHome default framework (currently `arduino`), we started supporting the framework `esp-idf` as this is a recomendation from ESPHome team since an year ago or so.
-~~The `arduino` protocol still more popular and therefore more components are available, but there are some advantages with the ESP-IDF framework:~~
+The `arduino` protocol still more popular and therefore more components are available, but there are some advantages with the ESP-IDF framework:
-- ~~It is updated more frequently by EspressIF, which means it is more secure and stable.~~
+- It is updated more frequently by EspressIF, which means it is more secure and stable.
-- ~~It reduces a layer, as Arduino is developed in top of ESP-IDF, so basically we are changing from ESPHome -> Arduino -> ESP-IDF -> Hardware to ESPHome -> ESP-IDF -> Hardware.~~
+- It reduces a layer, as Arduino is developed in top of ESP-IDF, so basically we are changing from ESPHome -> Arduino -> ESP-IDF -> Hardware to ESPHome -> ESP-IDF -> Hardware.
-- ~~By reducing a layer, more memory is available for future features and for the custom components you might want to add to your panel.~~
+- By reducing a layer, more memory is available for future features and for the custom components you might want to add to your panel.
-- ~~The memory management is more efficient, which makes critical tasks, like uploading a TFT file, more reliable.~~
+- The memory management is more efficient, which makes critical tasks, like uploading a TFT file, more reliable.
-~~<br>In the future we will probably make this as the default framework, so if you are a new user or if for some reason you have to flash your panel via serial/usb, it's a good idea to change to ESP-IDF now.~~
+<br>In the future we will probably make this as the default framework, so if you are a new user or if for some reason you have to flash your panel via serial/usb, it's a good idea to change to ESP-IDF now.
-~~<br>Please look at [customizations docs in the Wiki](https://github.com/Blackymas/NSPanel_HA_Blueprint/wiki/(EN)-Customization#framework-esp-idf) for more details on how to change the framework.~~
+<br>Please look at [customizations docs in the Wiki](https://github.com/Blackymas/NSPanel_HA_Blueprint/wiki/(EN)-Customization#framework-esp-idf) for more details on how to change the framework.
-~~<br>-> The ESP-IDF framework will be used when you enable the advanced mode.~~
+<br>-> The ESP-IDF framework will be used when you enable the advanced mode.
-
-> The support to IDF was temporarily removed on v4.1.2
 
 &nbsp;
 ### 4. Support to 921600 bps

nspanel_esphome_addon_upload_tft.yaml

@@ -13,11 +13,6 @@ substitutions:
   # nextion_update_blank_url: "https://github.com/Blackymas/NSPanel_HA_Blueprint/raw/main/custom_configuration/nspanel_blank.tft"
   ##############################################
 
-#external_components:
-#  - source: github://pr#5683 # Remove this when that pr is merged
-#    components:
-#      - nextion
-
 button:
   ##### UPDATE TFT DISPLAY #####
   - name: ${device_name} Update TFT display
@@ -94,8 +89,7 @@ script:
             exit_reparse->execute();
             delay_seconds_(2);
             ESP_LOGV(TAG, "Calling upload from Nextion component");
-            disp1->upload_tft();
+            if (disp1->upload_tft()) id(restart_nspanel).press();
-            id(restart_nspanel).press();
             ESP_LOGD(TAG, "Turn off Nextion");
             screen_power->turn_off();
             delay_seconds_(3);

nspanel_esphome_advanced.yaml

@@ -20,9 +20,9 @@ button:
 
 captive_portal:
 
-#esp32:
+esp32:
-#  framework:
+  framework:
-#    type: esp-idf
+    type: esp-idf
 
 sensor:
   ##### Uptime Sensors #####

nspanel_esphome_core.yaml

@@ -10,6 +10,11 @@ substitutions:
   version: "4.1.2"
   #############################
 
+external_components:
+  - source: github://pr#5825 # Remove this when that pr is merged and released
+    components:
+      - nextion
+
 ##### ESPHOME CONFIGURATION #####
 esphome:
   name: ${device_name}
@@ -32,7 +37,7 @@ esphome:
       - script.execute: exit_reparse
       - wait_until:
           condition:
-            - lambda: !lambda return disp1->is_setup();
+            - lambda: !lambda return disp1->is_detected();
           timeout: 20s
       - lambda: |-
           static const char *const TAG = "on_boot";
@@ -50,7 +55,7 @@ esphome:
           };
 
           nextion_status->execute();
-          if (not disp1->is_setup()) {
+          if (not disp1->is_detected()) {
             ESP_LOGE(TAG, "No response from Nextion display");
             ESP_LOGD(TAG, "Turn off Nextion");
             screen_power->turn_off();
@@ -62,12 +67,12 @@ esphome:
           }
       - wait_until:
           condition:
-            - lambda: !lambda return disp1->is_setup();
+            - lambda: !lambda return disp1->is_detected();
           timeout: 20s
       - lambda: |-
           static const char *const TAG = "on_boot";
           nextion_status->execute();
-          if (not disp1->is_setup()) {
+          if (not disp1->is_detected()) {
             ESP_LOGE(TAG, "No response from Nextion display");
           }
           ESP_LOGD(TAG, "Finished");
@@ -1344,7 +1349,7 @@ switch:
     on_turn_on:
       - wait_until:
           condition:
-            - lambda: !lambda return disp1->is_setup();
+            - lambda: !lambda return disp1->is_detected();
           timeout: 20s
       - lambda: |-
           if (id(boot_sequence_completed)) {
@@ -2646,7 +2651,7 @@ script:
       - lambda: |-
           static const char *const TAG = "script.nextion_status";
           ESP_LOGD(TAG, "Nextion status:");
-          //ESP_LOGD(TAG, "  Is detected: %s", disp1->is_detected() ? "True" : "False");
+          ESP_LOGD(TAG, "  Is detected: %s", disp1->is_detected() ? "True" : "False");
           ESP_LOGD(TAG, "  Is setup:    %s", disp1->is_setup() ? "True" : "False");
 
   ##### ADD-ONS ############################################################