diff --git a/esphome.yaml b/esphome.yaml
index d2323d2..1326470 100644
--- a/esphome.yaml
+++ b/esphome.yaml
@@ -23,31 +23,40 @@ substitutions:
   # nspanel_ha_climate_thermostat: climate.xxxxx
   ###### END OF SECRETS BLOCK TO PASTE ####################################################################
 
+###### Change ME ######
+  node_name: "nspanel_NAME" # ändere Name zum Beispiel in den Raum wo das NSPanel verbaut wird
+  device_name: § # ändere Name zum Beispiel Raum - ist der Name der in HA verwnedet wird
+  wifi_ssid:  "WLAN NAME" # Gib dein WLAN Name ein
+  wifi_password: "WLAN PASSWORD" # Gib dein Passwort fürs WLAN ein
+  ota_password: "OTA PASSWORD" # Gib ein Passwort ein - kann das selbe wie WLAN sein
+  nextion_update_url: "http://10.0.0.200:8123/local/nspanel/nspanel.tft" # URL to tft file git or local
+##### Change ME #####
+
+### advanced config activate only when you know what you do ###
+
+  # ## usage of secrets-file ## -> comment in ###### Change ME ######
+  # wifi_ssid: !secret nspanel_wifi_ssid # add in your esphome secrets file.
+  # wifi_password: !secret nspanel_wifi_password # add in your esphome secrets file.
+  # ota_password: !secret nspanel_ota_password # add in your esphome secrets file.
+  # nextion_update_url: !secret nspanel_update_url # add in your esphome secrets file.
+
+  # ## static ip config ##
+  # ip: "10.0.0.7"
+  # gw: "10.0.0.138"
+  # subnet: "255.255.255.0"
+  # dns: "10.0.0.138"
+  # domain: ".local"
+
+### end of advanced config
 
 
-  node_name: !secret nspanel_node_name # $node_name
-  device_name: !secret nspanel_device_name # $device_name
-  ip: !secret nspanel_ip # static ip
-  gw: !secret nspanel_gateway
-  subnet: !secret nspanel_subnet
-  dns: !secret nspanel_dns
-  domain: !secret nspanel_domain
-
-  wifi_ssid: !secret nspanel_wifi_ssid # add in your esphome secrets file.
-  wifi_password: !secret nspanel_wifi_password # add in your esphome secrets file.
-  ota_password: !secret nspanel_ota_password # add in your esphome secrets file.
-  nextion_update_url: !secret nspanel_update_url # add in your esphome secrets file.
-  webserver_password: !secret nspanel_web_password
-  ###### EDIT THE BELOW ENTITIES FOR YOURS... #######################################################################
-
-  #ha_weekday: sensor.wochentag ##### Sensor Wochentag generiert in HA (custom_configuration -> nspanel) #####
-  #ha_outdoor_temp: sensor.terrasse_garage_motion_sensor_temperature ##### Temperatur von Bewegungsmelder Outdoor (Zigbee2Mqtt) #####
-  #ha_hotwater_temp: sensor.hotwater_temp ##### Buderus Heizung Warmwasser Temperatur (Integration) #####
-  ha_hotwater_charge: !secret nspanel_hotwater_charge
-  ha_heating_system_flame: !secret nspanel_ha_heating_system_flame ##### Buderus Heizung Flamen-Status (Integration) #####
-  ha_climate_thermostat_target_temp: !secret nspanel_ha_climate_thermostat_target_temp  ##### Climate Thermostat generiert in HA (custom_configuration -> nspanel) #####
-  ha_climate_thermostat: !secret nspanel_ha_climate_thermostat ##### Climate Thermostat generiert in HA (custom_configuration -> nspanel) #####
-  #ha_humidity: sensor.kinderzimmer_lea_temperatur_sensor_humidity
+  ###### EDIT THE BELOW ENTITIES FOR YOURS... depricated #######################################################################
+  ### - will be removed in future release - ignore it or set if exist ##################
+  ha_hotwater_charge: switch.wwcharge
+  ha_heating_system_flame: binary_sensor.flamestatus ##### Buderus Heizung Flamen-Status (Integration) #####
+  ha_climate_thermostat_target_temp: sensor.nspanel_target_temp  ##### Climate Thermostat generiert in HA (custom_configuration -> nspanel) #####
+  ha_climate_thermostat: climate.nspanel_name ##### Climate Thermostat generiert in HA (custom_configuration -> nspanel) #####
+  
 #########################################
 #
 #
@@ -88,12 +97,13 @@ wifi:
   ssid: ${wifi_ssid}
   password: ${wifi_password}
   power_save_mode: none
-  manual_ip:
-    static_ip: ${ip}
-    gateway: ${gw}
-    subnet: ${subnet}
-    dns1: ${dns}
-  domain: ${domain}
+  ### advanced config - uncomment to use static IP-Config ###  
+  # manual_ip:
+  #   static_ip: ${ip}
+  #   gateway: ${gw}
+  #   subnet: ${subnet}
+  #   dns1: ${dns}
+  # domain: ${domain}
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:
     ssid: "${device_name}"
@@ -105,7 +115,7 @@ web_server:
   port: 80
   auth:
     username: admin
-    password: ${webserver_password}
+    password: ${ota_password}
 
 ##### OTA (Over the air updates) password #####
 ota:
@@ -139,23 +149,6 @@ uart:
   baud_rate: 115200
   id: tf_uart
 
-##### INFO - Time component that fetches time from home Assistant and updates the display once a minute and when the display is ready at bootup (and time is available) #####
-#time:
-#  - platform: homeassistant
-#    id: homeassistant_time
-#    on_time:
-#      - seconds: 0
-#        minutes: /1
-#        then:
-#          - wait_until:
-#              switch.is_on: nextion_init
-#          - lambda: id(disp1).set_component_text_printf("home.a01", "%02i:%02i", id(homeassistant_time).now().hour, id(homeassistant_time).now().minute);
-#    on_time_sync:
-#        then:
-#          - wait_until:
-#              switch.is_on: nextion_init
-#          - lambda: id(disp1).set_component_text_printf("home.a01", "%02i:%02i", id(homeassistant_time).now().hour, id(homeassistant_time).now().minute);
-
 ###### A reboot button is always useful #####
 button:
   - platform: restart
@@ -412,58 +405,6 @@ binary_sensor:
     on_click:
       - switch.toggle: hvac_mode
 
-  ##### Display Brightness - BUTTON DECREASES Brightness #####
-  #  - platform: nextion
-  #    name: $device_name Brightness DOWN
-  #    page_id: 7
-  #    component_id: 12
-  #    internal: true
-  #    on_click:
-  #      - number.set:
-  #          id: display_brightness
-  #          value: !lambda return id(display_brightness_global) - 1;
-  #      - lambda: id(disp1).set_component_text_printf("settings.a03", "%i", id(display_brightness_global));
-  #      - lambda: id(disp1).send_command_printf("settings.brightslider.val=%i", id(display_brightness_global));
-
-  ##### Display Brightness - BUTTON INCREASES Brightness #####
-  #  - platform: nextion
-  #    name: $device_name Brightness UP
-  #    page_id: 7
-  #    component_id: 13
-  #    internal: true
-  #    on_click:
-  #      - number.set:
-  #          id: display_brightness
-  #          value: !lambda return id(display_brightness_global) + 1;      
-  #      - lambda: id(disp1).set_component_text_printf("settings.a03", "%i", id(display_brightness_global));
-  #      - lambda: id(disp1).send_command_printf("settings.brightslider.val=%i", id(display_brightness_global));
-
-  ##### Display DIM Brightness - BUTTON DECREASES Brightness #####
-  #  - platform: nextion
-  #    name: $device_name Brightness DIM DOWN
-  #    page_id: 7
-  #    component_id: 14
-  #    internal: true
-  #    on_click:
-  #      - number.set:
-  #          id: display_dim_brightness
-  #          value: !lambda return id(display_dim_brightness_global) - 1;
-  #      - lambda: id(disp1).set_component_text_printf("settings.a04", "%i", id(display_dim_brightness_global));
-  #      - lambda: id(disp1).send_command_printf("settings.dimslider.val=%i", id(display_dim_brightness_global));
-            
-  ##### Display DIM Brightness - BUTTON INCREASES Brightness #####
-  #  - platform: nextion
-  #    name: $device_name Brightness DIM UP
-  #    page_id: 7
-  #    component_id: 15
-  #    internal: true
-  #    on_click:
-  #      - number.set:
-  #          id: display_dim_brightness
-  #          value: !lambda return id(display_dim_brightness_global) + 1;
-  #      - lambda: id(disp1).set_component_text_printf("settings.a04", "%i", id(display_dim_brightness_global));
-  #      - lambda: id(disp1).send_command_printf("settings.dimslider.val=%i", id(display_dim_brightness_global));
-
   ##### Restart NSPanel Button #####
   - platform: nextion
     name: ${device_name} Restart
@@ -554,39 +495,6 @@ sensor:
             switch.is_on: nextion_init
         - lambda: id(disp1).set_component_text_printf("home.a03", "%.1f°", id(temp_nspanel).state); # onboard temp (thermostat temp) to home page.
         - lambda: id(disp1).set_component_text_printf("thermostat.a04", "%.1f", id(temp_nspanel).state);
- 
-  ##### TEMPERATURE Outdoor FROM HA #####
-  #  - platform: homeassistant
-  #    id: temp_outdoor
-  #    entity_id: $ha_outdoor_temp
-  #    on_value:
-  #      then:
-  #        - wait_until:
-  #            switch.is_on: nextion_init
-  #        - lambda: id(disp1).set_component_text_printf("home.a06", "%.0f°", id(temp_outdoor).state);
-  #        - lambda: id(disp1).set_component_text_printf("thermostat.a07", "%.0f°", id(temp_outdoor).state);
-
-  ##### HUMIDITY Indoor FROM HA #####
-  #  - platform: homeassistant
-  #    id: humidity
-  #    entity_id: $ha_humidity
-  #    on_value:
-  #      then:
-  #        - wait_until:
-  #            switch.is_on: nextion_init
-  #        - lambda: id(disp1).set_component_text_printf("home.a04", "%.0f°", id(humidity).state);
-
-
-  ##### THERMOSTAT HOT WATER TEMP FROM HA #####
-  #  - platform: homeassistant
-  #    id: temp_hotwater
-  #    entity_id: $ha_hotwater_temp
-  #    on_value:
-  #      then:
-  #        - wait_until:
-  #            switch.is_on: nextion_init
-  #        - lambda: id(disp1).set_component_text_printf("home.a07", "%.1f°", id(temp_hotwater).state);
-  #        - lambda: id(disp1).set_component_text_printf("thermostat.a08", "%.1f°", id(temp_hotwater).state);
 
   ##### THERMOSTAT CLIMATE TARGET TEMPERATURE FROM HA #####
   - platform: homeassistant
@@ -977,18 +885,6 @@ text_sensor:
             id: last_click_weathersettings
             value: !lambda return x;
 
-
-
-  ##### Wochentag SENSOR FROM HA ##### 
-  #  - platform: homeassistant
-  #    id: weekday
-  #    entity_id: $ha_weekday
-  #    on_value:
-  #      then:
-  #        - wait_until:
-  #            switch.is_on: nextion_init
-  #        - lambda: id(disp1).set_component_text_printf("home.a02", "%s", id(weekday).state.c_str());
-
   ##### HEATING System ICON #####
   - platform: homeassistant
     entity_id: ${ha_heating_system_flame}
@@ -1021,58 +917,6 @@ text_sensor:
             } else {
               id(disp1).set_component_value("thermostat.a12",0);
             }
-#        - lambda: |-
-#            id(disp1).set_component_value("thermostat.a12",0);
-#            if (id(hotwater_charge) == "on") 
-#            {
-#              id(disp1).set_component_value("thermostat.a12",1);
-#            }
-            
-##### WEATHER SYMBOL FROM HA WEATHER ENTITY #####
-#  - platform: homeassistant
-#    id: weather_symbol
-#    entity_id: weather.home_wetter
-#    on_value:
-#      then:
-#        - wait_until:
-#            switch.is_on: nextion_init
-#        - lambda: |-
-#            int symbol=1; // 1 is a empty box.
-#            if (id(weather_symbol).state == "sunny") {
-#              symbol=2;
-#            } else if (id(weather_symbol).state == "cloudy") {
-#              symbol=3;
-#              if (id(sun_sun).state == "below_horizon") {
-#                symbol=3;
-#              }
-#            } else if (id(weather_symbol).state == "rainy") {
-#              symbol=4;
-#            } else if (id(weather_symbol).state == "pouring") {
-#              symbol=5;
-#            } else if (id(weather_symbol).state == "snowy") {
-#              symbol=6;
-#            } else if (id(weather_symbol).state == "hail" || id(weather_symbol).state == "snowy-rainy") {
-#              symbol=7;
-#            } else if (id(weather_symbol).state == "fog") {
-#              symbol=8;
-#            } else if (id(weather_symbol).state == "windy" || id(weather_symbol).state == "windy-variant") {
-#              symbol=9;
-#            } else if (id(weather_symbol).state == "lightning") {
-#              symbol=10;
-#            } else if (id(weather_symbol).state == "partlycloudy") {
-#              symbol=11;
-#              if (id(sun_sun).state == "below_horizon") {
-#                symbol=12;
-#              }
-#            } else if (id(weather_symbol).state == "lightning-rainy" || id(weather_symbol).state == "exceptional") {
-#              symbol=13;
-#              if (id(sun_sun).state == "below_horizon") {
-#                symbol=14;
-#              }
-#            } else if (id(weather_symbol).state == "clear-night") {
-#              symbol=15;
-#             }
-#            id(disp1).send_command_printf("home.a05.pic=%i", symbol);
 
 #########################################
 #
@@ -1135,26 +979,6 @@ switch:
     id: relay_2
     pin:
       number: 19
-    # on_turn_off:
-    #   - globals.set:
-    #         id: heating_room_global
-    #         value: '0'
-    #   - lambda: |-
-    #       if (id(hvac_mode_global) == 0) 
-    #       {
-    #         id(disp1).send_command_printf("thermostat.a06.pic=49");
-    #       } else if (id(hvac_mode_global) == 1) {
-    #           id(disp1).send_command_printf("thermostat.a06.pic=50");
-    #       }
-    #   - lambda: id(disp1).send_command_printf("home.a52.pic=53");
-    #   - lambda: id(disp1).send_command_printf("thermostat.a52.pic=53");
-    # on_turn_on:
-    #   - globals.set:
-    #         id: heating_room_global
-    #         value: '1'
-    #   - lambda: id(disp1).send_command_printf("thermostat.a06.pic=51");
-    #   - lambda: id(disp1).send_command_printf("home.a52.pic=66");
-    #   - lambda: id(disp1).send_command_printf("thermostat.a52.pic=66");
 
   ##### Switch Climate HVAC Mode #####
   - platform: template
diff --git a/esphome_dhcp.yaml b/esphome_dhcp.yaml
deleted file mode 100644
index 77fe3e2..0000000
--- a/esphome_dhcp.yaml
+++ /dev/null
@@ -1,1353 +0,0 @@
-#############################################################
-##### START - SUBSTITUTIONS #####
-#############################################################
-substitutions:
-  ##### GENEREL CONFIG MOVED TO ESPHOME SECRETS FILE -> PASTE THIS BLOCK AND MODIFY FOR YOUR NEEDS ########
-  ##### This way you don't need to modify this file anymore
-  # # Blackymas-NSPanel
-  # nspanel_update_url: 'http://1.2.3.4:8123/local/nspanel/nspanel.tft'
-  # nspanel_ota_password: "OTA-PASSWORD"
-  # nspanel_wifi_password: "WIFI-PASSWORD"
-  # nspanel_web_password: "WEBSERVER-PASSWORD"
-  # nspanel_wifi_ssid: "SSID"
-  # nspanel_node_name: "nspanel01"
-  # nspanel_device_name: "NSPanel01"
-  # nspanel_hotwater_charge: switch.wwontime
-  # nspanel_ha_heating_system_flame: binary_sensor.ems_boiler_burngas
-  # nspanel_ha_climate_thermostat_target_temp: sensor.xxxx
-  # nspanel_ha_climate_thermostat: climate.xxxxx
-  ###### END OF SECRETS BLOCK TO PASTE ####################################################################
-
-
-
-  node_name: !secret nspanel_node_name # $node_name
-  device_name: !secret nspanel_device_name # $device_name
-
-  wifi_ssid: !secret nspanel_wifi_ssid # add in your esphome secrets file.
-  wifi_password: !secret nspanel_wifi_password # add in your esphome secrets file.
-  ota_password: !secret nspanel_ota_password # add in your esphome secrets file.
-  nextion_update_url: !secret nspanel_update_url # add in your esphome secrets file.
-  webserver_password: !secret nspanel_web_password
-  ###### EDIT THE BELOW ENTITIES FOR YOURS... #######################################################################
-
-  #ha_weekday: sensor.wochentag ##### Sensor Wochentag generiert in HA (custom_configuration -> nspanel) #####
-  #ha_outdoor_temp: sensor.terrasse_garage_motion_sensor_temperature ##### Temperatur von Bewegungsmelder Outdoor (Zigbee2Mqtt) #####
-  #ha_hotwater_temp: sensor.hotwater_temp ##### Buderus Heizung Warmwasser Temperatur (Integration) #####
-  ha_hotwater_charge: !secret nspanel_hotwater_charge
-  ha_heating_system_flame: !secret nspanel_ha_heating_system_flame ##### Buderus Heizung Flamen-Status (Integration) #####
-  ha_climate_thermostat_target_temp: !secret nspanel_ha_climate_thermostat_target_temp  ##### Climate Thermostat generiert in HA (custom_configuration -> nspanel) #####
-  ha_climate_thermostat: !secret nspanel_ha_climate_thermostat ##### Climate Thermostat generiert in HA (custom_configuration -> nspanel) #####
-  #ha_humidity: sensor.kinderzimmer_lea_temperatur_sensor_humidity
-#########################################
-#
-#
-#############################################################
-##### CLOSE - SUBSTITUTIONS #####
-#############################################################
-#
-##
-###
-#############################################################################################################################################################################################
-###
-##
-#
-#############################################################
-##### START - Settings #####
-#############################################################
-#
-#
-#########################################
-
-##### Functionality for the Nextion display #####
-external_components:
-  - source: github://pr#2956
-    components: [nextion]
-    refresh: 1h
-
-##### ESP home CONFIG #####
-esphome:
-  name: ${node_name}
-  comment: ${device_name}
-
-##### TYPE OF ESP BOARD #####
-esp32:
-  board: esp32dev
-
-##### WIFI SETUP #####
-wifi:
-  ssid: ${wifi_ssid}
-  password: ${wifi_password}
-  power_save_mode: none
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "${device_name}"
-    password: ${wifi_password}
-
-captive_portal:
-
-web_server:
-  port: 80
-  auth:
-    username: admin
-    password: ${webserver_password}
-
-##### OTA (Over the air updates) password #####
-ota:
-  password: ${ota_password}
-  safe_mode: true
-  reboot_timeout: 3min
-  num_attempts: 3
-
-##### LOGGER #####
-logger:
-#  baud_rate: 0
-#  level: WARN
-
-##### CONFIGURE INTERNAL BUZZER #####
-output:
-    ##### BUZZER FOR PLAYING RINGTONES #####
-  - platform: ledc
-    id: buzzer_out
-    pin:
-      number: 21
-
-##### ENABLE RINGTONE MUSIC SUPPORT #####
-rtttl:
-  id: buzzer
-  output: buzzer_out
-
-##### UART FOR NEXTION DISPLAY #####
-uart:
-  tx_pin: 16
-  rx_pin: 17
-  baud_rate: 115200
-  id: tf_uart
-
-##### INFO - Time component that fetches time from home Assistant and updates the display once a minute and when the display is ready at bootup (and time is available) #####
-#time:
-#  - platform: homeassistant
-#    id: homeassistant_time
-#    on_time:
-#      - seconds: 0
-#        minutes: /1
-#        then:
-#          - wait_until:
-#              switch.is_on: nextion_init
-#          - lambda: id(disp1).set_component_text_printf("home.a01", "%02i:%02i", id(homeassistant_time).now().hour, id(homeassistant_time).now().minute);
-#    on_time_sync:
-#        then:
-#          - wait_until:
-#              switch.is_on: nextion_init
-#          - lambda: id(disp1).set_component_text_printf("home.a01", "%02i:%02i", id(homeassistant_time).now().hour, id(homeassistant_time).now().minute);
-
-###### A reboot button is always useful #####
-button:
-  - platform: restart
-    name: ${device_name} Restart
-    id: restart_nspanel
-
-
-
-
-#########################################
-#
-#
-#############################################################
-##### CLOSE - Settings #####
-#############################################################
-#
-##
-###
-#############################################################################################################################################################################################
-###
-##
-#
-#############################################################
-##### START - API #####
-#############################################################
-#
-#
-#########################################
-
-api:
-  services:
-
-    ##### SERVICE TO UPDATE THE HMI FILE #####
-    - service: upload_tft
-      then:
-        - lambda: 'id(disp1)->upload_tft();'
-            
-    ##### Service to send a command "printf" directly to the display. Useful for testing #####
-    - service: send_command_printf
-      variables:
-        cmd: string
-      then:
-        - lambda: 'id(disp1).send_command_printf("%s", cmd.c_str());'
-
-    ##### Service to send a command "text_printf" directly to the display. Useful for testing #####
-    - service: send_command_text_printf
-      variables:
-        component: string
-        message: string
-      then:
-        - wait_until:
-              switch.is_on: nextion_init
-        - lambda: 'id(disp1).set_component_text_printf(component.c_str(), "%s", message.c_str());'
-
-    ##### Service to send a command "component_value (Dualstate Button)" directly to the display. Useful for testing #####
-    - service: send_command_value
-      variables:
-        component: string
-        message: int
-      then:
-        - wait_until:
-              switch.is_on: nextion_init
-        - lambda: 'id(disp1).set_component_value(component.c_str(), message);'
-
-    ##### Service to send a command "component_value (Dualstate Button)" directly to the display. Useful for testing #####
-    - service: send_command_hide
-      variables:
-        component: string
-      then:
-        - wait_until:
-              switch.is_on: nextion_init
-        - lambda: 'id(disp1).hide_component(component.c_str());'
-
-    ##### Service to send a command "component_value (Dualstate Button)" directly to the display. Useful for testing #####
-    - service: send_command_font_color
-      variables:
-        component: string
-        message: int
-      then:
-        - wait_until:
-              switch.is_on: nextion_init
-        - lambda: 'id(disp1).set_component_font_color(component.c_str(), message);'
-    ##### Service to send a command "component_value (Dualstate Button)" directly to the display. Useful for testing #####
-    - service: send_command_background_color
-      variables:
-        component: string
-        message: int
-      then:
-        - wait_until:
-              switch.is_on: nextion_init
-        - lambda: 'id(disp1).set_component_background_color(component.c_str(), message);'
-
-#########################################
-#
-#
-#############################################################
-##### CLOSE - API #####
-#############################################################
-#
-##
-###
-#############################################################################################################################################################################################
-###
-##
-#
-#############################################################
-##### START - GLOBALS #####
-#############################################################
-#
-#
-#########################################
-
-globals:
-
-  ##### Save Target Temp #####
-  - id: climate_target_temp_val_global
-    type: float
-    restore_value: true
-    initial_value: '12'
-
-  ##### Save Thermostat PIC Position #####
-  - id: climate_slider_val_global
-    type: int
-    restore_value: true
-    initial_value: '0'
-
-  ##### Save Display Brightness for NSPanel reboot #####
-  - id: display_brightness_global
-    type: int
-    restore_value: true
-    initial_value: '100'
-
-  ##### Save Display DIM Brightness for NSPanel reboot
-  - id: display_dim_brightness_global
-    type: int
-    restore_value: true
-    initial_value: '10'
-
-  ##### Save Display DIM Brightness for NSPanel reboot
-  - id: sleep_modus_global
-    type: int
-    restore_value: true
-    initial_value: '0'
-
-  ##### Save State Heating Room #####
-  - id: heating_room_global
-    type: int
-    restore_value: true
-    initial_value: '0'
-
-  ##### Save State HVAC #####
-  - id: hvac_mode_global
-    type: int
-    restore_value: true
-    initial_value: '0'
-
-  ##### lastclick State #####
-  - id: lastclick_global
-    type: std::string
-    restore_value: no
-    initial_value: ''
-
-  ##### lastclick State #####
-  - id: last_click_lightsettings
-    type: std::string
-    restore_value: no
-    initial_value: ''
-
-  ##### lastclick State #####
-  - id: last_click_coversettings
-    type: std::string
-    restore_value: no
-    initial_value: ''
-
-  ##### lastclick State #####
-  - id: last_click_weathersettings
-    type: std::string
-    restore_value: no
-    initial_value: ''
-
-#########################################
-#
-#
-#############################################################
-##### CLOSE - GLOBALS #####
-#############################################################
-#
-##
-###
-#############################################################################################################################################################################################
-###
-##
-#
-#############################################################
-##### START - BINARY SENSOR #####
-#############################################################
-#
-#
-#########################################
-
-binary_sensor:
-
-  ###### LEFT BUTTON BELOW DISPLAY TO TOGGLE RELAY#####
-  - platform: gpio
-    name: ${device_name} Left Button
-    pin:
-      number: 14
-      inverted: true
-  #    on_click:
-  #      - switch.toggle: relay_1
-
-  ##### RIGHT BUTTON BELOW DISPLAY TO TOGGLE RELAY #####
-  - platform: gpio
-    name: ${device_name} Right Button
-    pin:
-      number: 27
-      inverted: true
-  #    on_click:
-  #        - switch.toggle: relay_2
-
-  ##### THERMOSTAT - BUTTON DECREASES CLIMATE TARGET TEMPERATURE IN HA #####
-  - platform: nextion
-    name: ${device_name} Climate Target DOWN
-    page_id: 6
-    component_id: 13
-    internal: true
-    on_click:
-      - homeassistant.service:
-          service: climate.set_temperature
-          data_template:
-            entity_id: ${ha_climate_thermostat}
-            temperature: !lambda return id(climate_target_temp_val_global) - 0.5;
-            
-  ##### THERMOSTAT - BUTTON INCREASES CLIMATE TARGET TEMPERATURE IN HA #####            
-  - platform: nextion
-    name: ${device_name} Climate Target UP
-    page_id: 6
-    component_id: 14
-    internal: true
-    on_click:
-      - homeassistant.service:
-          service: climate.set_temperature
-          data_template:
-            entity_id: ${ha_climate_thermostat}
-            temperature: !lambda return id(climate_target_temp_val_global) + 0.5;
-
-  ##### THERMOSTAT - BUTTON ON / OFF Heating #####
-  - platform: nextion
-    name: ${device_name} Heating Room State
-    id: heating_room_state
-    page_id: 6
-    component_id: 16
-    internal: true
-    on_click:
-      - switch.toggle: hvac_mode
-
-  ##### Display Brightness - BUTTON DECREASES Brightness #####
-  #  - platform: nextion
-  #    name: $device_name Brightness DOWN
-  #    page_id: 7
-  #    component_id: 12
-  #    internal: true
-  #    on_click:
-  #      - number.set:
-  #          id: display_brightness
-  #          value: !lambda return id(display_brightness_global) - 1;
-  #      - lambda: id(disp1).set_component_text_printf("settings.a03", "%i", id(display_brightness_global));
-  #      - lambda: id(disp1).send_command_printf("settings.brightslider.val=%i", id(display_brightness_global));
-
-  ##### Display Brightness - BUTTON INCREASES Brightness #####
-  #  - platform: nextion
-  #    name: $device_name Brightness UP
-  #    page_id: 7
-  #    component_id: 13
-  #    internal: true
-  #    on_click:
-  #      - number.set:
-  #          id: display_brightness
-  #          value: !lambda return id(display_brightness_global) + 1;      
-  #      - lambda: id(disp1).set_component_text_printf("settings.a03", "%i", id(display_brightness_global));
-  #      - lambda: id(disp1).send_command_printf("settings.brightslider.val=%i", id(display_brightness_global));
-
-  ##### Display DIM Brightness - BUTTON DECREASES Brightness #####
-  #  - platform: nextion
-  #    name: $device_name Brightness DIM DOWN
-  #    page_id: 7
-  #    component_id: 14
-  #    internal: true
-  #    on_click:
-  #      - number.set:
-  #          id: display_dim_brightness
-  #          value: !lambda return id(display_dim_brightness_global) - 1;
-  #      - lambda: id(disp1).set_component_text_printf("settings.a04", "%i", id(display_dim_brightness_global));
-  #      - lambda: id(disp1).send_command_printf("settings.dimslider.val=%i", id(display_dim_brightness_global));
-            
-  ##### Display DIM Brightness - BUTTON INCREASES Brightness #####
-  #  - platform: nextion
-  #    name: $device_name Brightness DIM UP
-  #    page_id: 7
-  #    component_id: 15
-  #    internal: true
-  #    on_click:
-  #      - number.set:
-  #          id: display_dim_brightness
-  #          value: !lambda return id(display_dim_brightness_global) + 1;
-  #      - lambda: id(disp1).set_component_text_printf("settings.a04", "%i", id(display_dim_brightness_global));
-  #      - lambda: id(disp1).send_command_printf("settings.dimslider.val=%i", id(display_dim_brightness_global));
-
-  ##### Restart NSPanel Button #####
-  - platform: nextion
-    name: ${device_name} Restart
-    page_id: 7
-    component_id: 10
-    internal: true
-    on_click:
-      - button.press: restart_nspanel
-
-  ##### Sleep Modus NSPanel Button #####
-  - platform: nextion
-    name: ${device_name} Sleep Modus
-    page_id: 7
-    component_id: 5
-    internal: true
-    on_click:
-      - switch.toggle: sleep_modus
-
-  ##### Hotwater Charge #####
-  - platform: nextion
-    name: ${device_name} Hotwater Charge
-    page_id: 6
-    component_id: 21
-    on_click:
-      - homeassistant.service:
-          service: switch.toggle
-          data:
-            entity_id: ${ha_hotwater_charge}
-
-#########################################
-#
-#
-#############################################################
-##### CLOSE - BINARY SENSOR #####
-#############################################################
-#
-##
-###
-#############################################################################################################################################################################################
-###
-##
-#
-#############################################################
-##### START - SENSOR #####
-#############################################################
-#
-#
-#########################################
-
-sensor:
-
-  ##### Uptime #####
-  - platform: uptime
-    name: ${device_name} uptime
-    disabled_by_default: true
-
-  ##### WIFI Signal stregth
-  - platform: wifi_signal
-    name: ${device_name} RSSI
-    update_interval: 60s
-
-  ##### INTERNAL TEMPERATUE SENSOR, ADC VALUE #####
-  - platform: adc
-    id: ntc_source
-    pin: 38
-    update_interval: 10s
-    attenuation: 11db
-
-  ##### INTERNAL TEMPERATUE SENSOR, adc reading converted to resistance (calculation)#####
-  - platform: resistance
-    id: resistance_sensor
-    sensor: ntc_source
-    configuration: DOWNSTREAM
-    resistor: 11.2kOhm
-
-  ##### INTERNAL TEMPERATUE SENSOR, resistance to temperature (calculation) #####
-  - platform: ntc
-    name: ${device_name} Temperature
-    id: temp_nspanel
-    sensor: resistance_sensor
-    calibration:
-      b_constant: 3950
-      reference_temperature: 25°C
-      reference_resistance: 10kOhm
-    on_value:
-      then:
-        - wait_until:
-            switch.is_on: nextion_init
-        - lambda: id(disp1).set_component_text_printf("home.a03", "%.1f°", id(temp_nspanel).state); # onboard temp (thermostat temp) to home page.
-        - lambda: id(disp1).set_component_text_printf("thermostat.a04", "%.1f", id(temp_nspanel).state);
- 
-  ##### TEMPERATURE Outdoor FROM HA #####
-  #  - platform: homeassistant
-  #    id: temp_outdoor
-  #    entity_id: $ha_outdoor_temp
-  #    on_value:
-  #      then:
-  #        - wait_until:
-  #            switch.is_on: nextion_init
-  #        - lambda: id(disp1).set_component_text_printf("home.a06", "%.0f°", id(temp_outdoor).state);
-  #        - lambda: id(disp1).set_component_text_printf("thermostat.a07", "%.0f°", id(temp_outdoor).state);
-
-  ##### HUMIDITY Indoor FROM HA #####
-  #  - platform: homeassistant
-  #    id: humidity
-  #    entity_id: $ha_humidity
-  #    on_value:
-  #      then:
-  #        - wait_until:
-  #            switch.is_on: nextion_init
-  #        - lambda: id(disp1).set_component_text_printf("home.a04", "%.0f°", id(humidity).state);
-
-
-  ##### THERMOSTAT HOT WATER TEMP FROM HA #####
-  #  - platform: homeassistant
-  #    id: temp_hotwater
-  #    entity_id: $ha_hotwater_temp
-  #    on_value:
-  #      then:
-  #        - wait_until:
-  #            switch.is_on: nextion_init
-  #        - lambda: id(disp1).set_component_text_printf("home.a07", "%.1f°", id(temp_hotwater).state);
-  #        - lambda: id(disp1).set_component_text_printf("thermostat.a08", "%.1f°", id(temp_hotwater).state);
-
-  ##### THERMOSTAT CLIMATE TARGET TEMPERATURE FROM HA #####
-  - platform: homeassistant
-    id: ha_climate_target_temp
-    entity_id: ${ha_climate_thermostat_target_temp}
-    on_value:
-      then:
-        - wait_until:
-            switch.is_on: nextion_init
-        - globals.set:
-            id: climate_target_temp_val_global
-            value: !lambda 'return float(x);'
-        - lambda: id(disp1).set_component_text_printf("thermostat.a05", "%.1f", id(climate_target_temp_val_global));
-          # THERMO PROGRESS CIRCLE, broken into 3 images to create space for the temperatures in the center.
-        - lambda: |-
-            int left=16; // 16 is empty left.
-            int mid=17; // 17 is empty mid.
-            int right=18; // 18 is empty right.
-            if (id(climate_target_temp_val_global) == 13) {
-              left=16;
-              mid=17;
-              right=18;
-            } else if (id(climate_target_temp_val_global) == 13.5) {
-              left=19;
-              mid=17;
-              right=18;
-            } else if (id(climate_target_temp_val_global) == 14) {
-              left=20;
-              mid=17;
-              right=18;
-            } else if (id(climate_target_temp_val_global) == 14.5) {
-              left=21;
-              mid=17;
-              right=18;
-            } else if (id(climate_target_temp_val_global) == 15) {
-              left=22;
-              mid=17;
-              right=18;
-            } else if (id(climate_target_temp_val_global) == 15.5) {
-              left=23;
-              mid=17;
-              right=18;
-            } else if (id(climate_target_temp_val_global) == 16) {
-              left=24;
-              mid=17;
-              right=18;
-            } else if (id(climate_target_temp_val_global) == 16.5) {
-              left=25;
-              mid=17;
-              right=18;
-            } else if (id(climate_target_temp_val_global) == 17) {
-              left=26;
-              mid=17;
-              right=18;
-            } else if (id(climate_target_temp_val_global) == 17.5) {
-              left=27;
-              mid=17;
-              right=18;
-            } else if (id(climate_target_temp_val_global) == 18) {
-              left=28;
-              mid=17;
-              right=18;
-            } else if (id(climate_target_temp_val_global) == 18.5) {
-              left=29;
-              mid=30;
-              right=18;
-            } else if (id(climate_target_temp_val_global) == 19) {
-              left=29; 
-              mid=31;
-              right=18;
-            } else if (id(climate_target_temp_val_global) == 19.5) {
-              left=29;
-              mid=32;
-              right=18;
-            } else if (id(climate_target_temp_val_global) == 20) {
-              left=29;
-              mid=33;
-              right=18;
-            } else if (id(climate_target_temp_val_global) == 20.5) {
-              left=29;
-              mid=34;
-              right=18;
-            } else if (id(climate_target_temp_val_global) == 21) {
-              left=29;
-              mid=35;
-              right=18;
-            } else if (id(climate_target_temp_val_global) == 21.5) {
-              left=29;
-              mid=36;
-              right=18;
-            } else if (id(climate_target_temp_val_global) == 22) {
-              left=29;
-              mid=37;
-              right=38;
-            } else if (id(climate_target_temp_val_global) == 22.5) {
-              left=29;
-              mid=37;
-              right=39;
-            } else if (id(climate_target_temp_val_global) == 23) {
-              left=29;
-              mid=37;
-              right=40;
-            } else if (id(climate_target_temp_val_global) == 23.5) {
-              left=29;
-              mid=37;
-              right=41;
-            } else if (id(climate_target_temp_val_global) == 24) {
-              left=29;
-              mid=37;
-              right=42;
-            } else if (id(climate_target_temp_val_global) == 24.5) {
-              left=29;
-              mid=37;
-              right=43;
-            } else if (id(climate_target_temp_val_global) == 25) {
-              left=29;
-              mid=37;
-              right=44;
-            } else if (id(climate_target_temp_val_global) == 25.5) {
-              left=29;
-              mid=37;
-              right=45;
-            } else if (id(climate_target_temp_val_global) == 26) {
-              left=29;
-              mid=37;
-              right=46;
-            } else if (id(climate_target_temp_val_global) == 26.5) {
-              left=29;
-              mid=37;
-              right=47;
-            } else if (id(climate_target_temp_val_global) == 27) {
-              left=29;
-              mid=37;
-              right=48;
-            }
-            // sends the 3 images to the display
-            id(disp1).send_command_printf("thermostat.a01.pic=%i", left);
-            id(disp1).send_command_printf("thermostat.a02.pic=%i", mid);
-            id(disp1).send_command_printf("thermostat.a03.pic=%i", right);
-
-  ###### TARGET TEMPERATURE GET VALUE FROM NEXTION CIRCLE SLIDER AND SET GLOBAL VARIBLE #####
-  - platform: nextion
-    id: climate_circleslider
-    name: ${device_name} Climate circleslider
-    variable_name: climateslider
-    internal: true
-    on_value:
-      then:
-        - wait_until:
-            switch.is_on: nextion_init
-        - globals.set:
-            id: climate_slider_val_global
-            value: !lambda 'return int(x);'
-        - lambda: |-
-            if (id(climate_slider_val_global) == 0) {
-              id(climate_target_temp_val_global) = 13;
-            } else if (id(climate_slider_val_global) == 1) {
-              id(climate_target_temp_val_global) = 13.5;
-            } else if (id(climate_slider_val_global) == 2) {
-              id(climate_target_temp_val_global) = 14;
-            } else if (id(climate_slider_val_global) == 3) {
-              id(climate_target_temp_val_global) = 14.5;
-            } else if (id(climate_slider_val_global) == 4) {
-              id(climate_target_temp_val_global) = 15;
-            } else if (id(climate_slider_val_global) == 5) {
-              id(climate_target_temp_val_global) = 15.5;
-            } else if (id(climate_slider_val_global) == 6) {
-              id(climate_target_temp_val_global) = 16;
-            } else if (id(climate_slider_val_global) == 7) {
-              id(climate_target_temp_val_global) = 16.5;
-            } else if (id(climate_slider_val_global) == 8) {
-              id(climate_target_temp_val_global) = 17;
-            } else if (id(climate_slider_val_global) == 9) {
-              id(climate_target_temp_val_global) = 17.5;
-            } else if (id(climate_slider_val_global) == 10) {
-              id(climate_target_temp_val_global) = 18;
-            } else if (id(climate_slider_val_global) == 11) {
-              id(climate_target_temp_val_global) = 18.5;
-            } else if (id(climate_slider_val_global) == 12) {
-              id(climate_target_temp_val_global) = 19;
-            } else if (id(climate_slider_val_global) == 13) {
-              id(climate_target_temp_val_global) = 19.5;
-            } else if (id(climate_slider_val_global) == 14) {
-              id(climate_target_temp_val_global) = 20;
-            } else if (id(climate_slider_val_global) == 15) {
-              id(climate_target_temp_val_global) = 20.5;
-            } else if (id(climate_slider_val_global) == 16) {
-              id(climate_target_temp_val_global) = 21;
-            } else if (id(climate_slider_val_global) == 17) {
-              id(climate_target_temp_val_global) = 21.5;
-            } else if (id(climate_slider_val_global) == 18) {
-              id(climate_target_temp_val_global) = 22;
-            } else if (id(climate_slider_val_global) == 19) {
-              id(climate_target_temp_val_global) = 22.5;
-            } else if (id(climate_slider_val_global) == 20) {
-              id(climate_target_temp_val_global) = 23;
-            } else if (id(climate_slider_val_global) == 21) {
-              id(climate_target_temp_val_global) = 23.5;
-            } else if (id(climate_slider_val_global) == 22) {
-              id(climate_target_temp_val_global) = 24;
-            } else if (id(climate_slider_val_global) == 23) {
-              id(climate_target_temp_val_global) = 24.5;
-            } else if (id(climate_slider_val_global) == 24) {
-              id(climate_target_temp_val_global) = 25;
-            } else if (id(climate_slider_val_global) == 25) {
-              id(climate_target_temp_val_global) = 25.5;
-            } else if (id(climate_slider_val_global) == 26) {
-              id(climate_target_temp_val_global) = 26;
-            } else if (id(climate_slider_val_global) == 27) {
-              id(climate_target_temp_val_global) = 26.5;
-            } else if (id(climate_slider_val_global) == 28) {
-              id(climate_target_temp_val_global) = 27;
-            }
-        - homeassistant.service:
-            service: climate.set_temperature
-            data_template:
-              entity_id: ${ha_climate_thermostat}
-              temperature: !lambda return id(climate_target_temp_val_global);
-
-  ###### Display Brightness GET VALUE FROM NSPanel SLIDER #####
-  - platform: nextion
-    id: brightslider
-    name: ${device_name} brightness Slider
-    variable_name: brightslider
-    internal: true
-    on_value:
-      then:
-        - wait_until:
-            switch.is_on: nextion_init
-        - number.set:
-            id: display_brightness
-            value: !lambda 'return int(x);'
-          # send text field percentage of current_lightslider_val  
-        - lambda: id(disp1).set_component_text_printf("settings.a03", "%i", id(display_brightness_global));
-
-  ###### Display DIM Brightness GET VALUE FROM NSPanel SLIDER #####
-  - platform: nextion
-    id: dimslider
-    name: ${device_name} dim brightness slider
-    variable_name: dimslider
-    internal: true
-    on_value:
-      then:
-        - wait_until:
-            switch.is_on: nextion_init
-        - number.set:
-            id: display_dim_brightness
-            value: !lambda 'return int(x);'
-          # send text field percentage of current_lightslider_val  
-        - lambda: id(disp1).set_component_text_printf("settings.a04", "%i", id(display_dim_brightness_global));
-
-  ###### Send current page to HA
-  - platform: nextion
-    id: current_page
-    name: "${device_name} Current Page"
-    variable_name: dp
-    update_interval: 1s
-    accuracy_decimals: 0
-    filters:
-      - delta: 1.0
-      - lambda: return int(x);
-
-
-#########################################
-#
-#
-#############################################################
-##### CLOSE - SENSOR #####
-#############################################################
-#
-##
-###
-#############################################################################################################################################################################################
-###
-##
-#
-#############################################################
-##### START - TEXT SENSOR#####
-#############################################################
-#
-#
-#########################################
-
-text_sensor:
-
-  ##### ESPhome version used to compile the app #####
-  - platform: version
-    name: ${device_name} ESPhome Version
-    disabled_by_default: true
-
-  - platform: wifi_info
-    ip_address:
-      name: ${device_name} IP
-      disabled_by_default: true
-    ssid:
-      name: ${device_name} SSID
-      disabled_by_default: true
-    bssid:
-      name: ${device_name} BSSID
-      disabled_by_default: true
-
-  ##### SUN SENSOR FROM HA #####
-  - platform: homeassistant
-    id: sun_sun
-    entity_id: sun.sun
-
-  ##### last click sensor, the main action variable - push to HA #####
-  - platform: nextion
-    nextion_id: disp1
-    name: ${device_name} Last Click
-    id: disp1_last_click_nextion
-    update_interval: 50ms
-    component_name: lastclick
-    internal: false
-    filters:
-      - lambda: |-
-          if (strcmp(x.c_str(), id(lastclick_global).c_str()) != 0) {
-            return x;
-          } else {
-            return {};
-          }
-    on_value:
-      then:
-        - globals.set:
-            id: lastclick_global
-            value: !lambda return x;
-  
-  ##### last click lightsettings page, the main action variable - push to HA #####
-  - platform: nextion
-    nextion_id: disp1
-    name: ${device_name} last click lightsettings
-    id: disp1_last_click_lightsettings
-    update_interval: 50ms
-    component_name: lightsetting
-    internal: false
-    filters:
-      - lambda: |-
-          if (strcmp(x.c_str(), id(last_click_lightsettings).c_str()) != 0) {
-            return x;
-          } else {
-            return {};
-          }
-    on_value:
-      then:
-        - globals.set:
-            id: last_click_lightsettings
-            value: !lambda return x;
-
-  ##### last click coversettings page, the main action variable - push to HA #####
-  - platform: nextion
-    nextion_id: disp1
-    name: ${device_name} last click coversettings
-    id: disp1_last_click_coversettings
-    update_interval: 50ms
-    component_name: coversetting
-    internal: false
-    filters:
-      - lambda: |-
-          if (strcmp(x.c_str(), id(last_click_coversettings).c_str()) != 0) {
-            return x;
-          } else {
-            return {};
-          }
-    on_value:
-      then:
-        - globals.set:
-            id: last_click_coversettings
-            value: !lambda return x;
-
-  ##### last click weather page, the main action variable - push to HA #####
-  - platform: nextion
-    nextion_id: disp1
-    name: ${device_name} last click weathersettings
-    id: disp1_last_click_weathersettings
-    update_interval: 50ms
-    component_name: weathersetting
-    internal: false
-    filters:
-      - lambda: |-
-          if (strcmp(x.c_str(), id(last_click_weathersettings).c_str()) != 0) {
-            return x;
-          } else {
-            return {};
-          }
-    on_value:
-      then:
-        - globals.set:
-            id: last_click_weathersettings
-            value: !lambda return x;
-
-
-
-  ##### Wochentag SENSOR FROM HA ##### 
-  #  - platform: homeassistant
-  #    id: weekday
-  #    entity_id: $ha_weekday
-  #    on_value:
-  #      then:
-  #        - wait_until:
-  #            switch.is_on: nextion_init
-  #        - lambda: id(disp1).set_component_text_printf("home.a02", "%s", id(weekday).state.c_str());
-
-  ##### HEATING System ICON #####
-  - platform: homeassistant
-    entity_id: ${ha_heating_system_flame}
-    name: "Heating System"
-    id: heating_system
-    on_value:
-      then:
-        - wait_until:
-            switch.is_on: nextion_init
-        - lambda: |-
-            int symbol=53; // 53 is a blank image 20x20
-            if (id(heating_system).state == "on") {
-              symbol=64;
-            }
-            id(disp1).send_command_printf("home.a50.pic=%i", symbol);
-            id(disp1).send_command_printf("thermostat.a50.pic=%i", symbol);
-
-  ##### Hotwater Charge ICON #####
-  - platform: homeassistant
-    entity_id: ${ha_hotwater_charge}
-    name: "Hotwater Charge"
-    id: hotwater_charge
-    on_value:
-      then:
-        - wait_until:
-            switch.is_on: nextion_init
-        - lambda: |- 
-            if (id(hotwater_charge).state == "on") {
-              id(disp1).set_component_value("thermostat.a12",1);
-            } else {
-              id(disp1).set_component_value("thermostat.a12",0);
-            }
-#        - lambda: |-
-#            id(disp1).set_component_value("thermostat.a12",0);
-#            if (id(hotwater_charge) == "on") 
-#            {
-#              id(disp1).set_component_value("thermostat.a12",1);
-#            }
-            
-##### WEATHER SYMBOL FROM HA WEATHER ENTITY #####
-#  - platform: homeassistant
-#    id: weather_symbol
-#    entity_id: weather.home_wetter
-#    on_value:
-#      then:
-#        - wait_until:
-#            switch.is_on: nextion_init
-#        - lambda: |-
-#            int symbol=1; // 1 is a empty box.
-#            if (id(weather_symbol).state == "sunny") {
-#              symbol=2;
-#            } else if (id(weather_symbol).state == "cloudy") {
-#              symbol=3;
-#              if (id(sun_sun).state == "below_horizon") {
-#                symbol=3;
-#              }
-#            } else if (id(weather_symbol).state == "rainy") {
-#              symbol=4;
-#            } else if (id(weather_symbol).state == "pouring") {
-#              symbol=5;
-#            } else if (id(weather_symbol).state == "snowy") {
-#              symbol=6;
-#            } else if (id(weather_symbol).state == "hail" || id(weather_symbol).state == "snowy-rainy") {
-#              symbol=7;
-#            } else if (id(weather_symbol).state == "fog") {
-#              symbol=8;
-#            } else if (id(weather_symbol).state == "windy" || id(weather_symbol).state == "windy-variant") {
-#              symbol=9;
-#            } else if (id(weather_symbol).state == "lightning") {
-#              symbol=10;
-#            } else if (id(weather_symbol).state == "partlycloudy") {
-#              symbol=11;
-#              if (id(sun_sun).state == "below_horizon") {
-#                symbol=12;
-#              }
-#            } else if (id(weather_symbol).state == "lightning-rainy" || id(weather_symbol).state == "exceptional") {
-#              symbol=13;
-#              if (id(sun_sun).state == "below_horizon") {
-#                symbol=14;
-#              }
-#            } else if (id(weather_symbol).state == "clear-night") {
-#              symbol=15;
-#             }
-#            id(disp1).send_command_printf("home.a05.pic=%i", symbol);
-
-#########################################
-#
-#
-#############################################################
-##### CLOSE - TEXT SENSOR #####
-#############################################################
-#
-##
-###
-#############################################################################################################################################################################################
-###
-##
-#
-#############################################################
-##### START - SWITCH #####
-#############################################################
-#
-#
-#########################################
- 
-switch:
-
-  # ##### Restart switch ######
-  # - platform: restart
-  #   name: ${device_name} Restart
-
-  # ##### Restart in safe-mode #####
-  # - platform: safe_mode
-  #   name: ${device_name} Restart (Safe Mode)
-
-  ##### global variable to keep track on whether the Nextion display is ready or not. Delays initial info from HA to the display #####
-  - platform: template
-    name: ${device_name} Nextion inited
-    id: nextion_init
-    entity_category: config
-    restore_state: false
-    assumed_state: off
-    optimistic: true
-
-  ##### UPDATE TFT DISPLAY #####
-  - platform: template
-    name: Update TFT display
-    id: tft_update
-    turn_on_action:
-      - delay: 16ms
-      - lambda: id(disp1).upload_tft();
-      - switch.turn_off: tft_update
-
-  ##### PHYSICAL SWITCH 1 #####
-  - platform: gpio
-    name: ${device_name} Relay 1
-    id: relay_1
-    pin:
-      number: 22
-
-  ##### PHYSICAL SWITCH 2 ######
-  - platform: gpio
-    name: ${device_name} Relay 2
-    id: relay_2
-    pin:
-      number: 19
-    # on_turn_off:
-    #   - globals.set:
-    #         id: heating_room_global
-    #         value: '0'
-    #   - lambda: |-
-    #       if (id(hvac_mode_global) == 0) 
-    #       {
-    #         id(disp1).send_command_printf("thermostat.a06.pic=49");
-    #       } else if (id(hvac_mode_global) == 1) {
-    #           id(disp1).send_command_printf("thermostat.a06.pic=50");
-    #       }
-    #   - lambda: id(disp1).send_command_printf("home.a52.pic=53");
-    #   - lambda: id(disp1).send_command_printf("thermostat.a52.pic=53");
-    # on_turn_on:
-    #   - globals.set:
-    #         id: heating_room_global
-    #         value: '1'
-    #   - lambda: id(disp1).send_command_printf("thermostat.a06.pic=51");
-    #   - lambda: id(disp1).send_command_printf("home.a52.pic=66");
-    #   - lambda: id(disp1).send_command_printf("thermostat.a52.pic=66");
-
-  ##### Switch Climate HVAC Mode #####
-  - platform: template
-    device_class: switch
-    name: ${device_name} hvac Mode
-    id: hvac_mode
-    restore_state: true
-    assumed_state: false
-    optimistic: true
-    on_turn_off:
-      - lambda: id(disp1).set_component_value("thermostat.a10",0);
-      - globals.set:
-            id: hvac_mode_global
-            value: '0'
-      - homeassistant.service:
-          service: climate.set_hvac_mode
-          data_template:
-            entity_id: $ha_climate_thermostat
-            hvac_mode: 'off'
-      - lambda: id(disp1).send_command_printf("thermostat.a06.pic=49");
-      - lambda: id(disp1).send_command_printf("home.a51.pic=53");
-      - lambda: id(disp1).send_command_printf("thermostat.a51.pic=53");
-    on_turn_on:
-      - lambda: id(disp1).set_component_value("thermostat.a10",1);
-      - globals.set:
-            id: hvac_mode_global
-            value: '1'
-      - homeassistant.service:
-          service: climate.set_hvac_mode
-          data_template:
-            entity_id: $ha_climate_thermostat
-            hvac_mode: 'heat'
-      - lambda: |-
-          if (id(heating_room_global) == 0) 
-          {
-            id(disp1).send_command_printf("thermostat.a06.pic=50");
-          } else if (id(heating_room_global) == 1) {
-            id(disp1).send_command_printf("thermostat.a06.pic=51");
-          } 
-      - lambda: id(disp1).send_command_printf("home.a51.pic=65");
-      - lambda: id(disp1).send_command_printf("thermostat.a51.pic=65");
-      
-  ##### DISPLAY ALWAYS ON #####
-  - platform: gpio
-    name: ${device_name} Screen Power
-    id: screen_power
-    entity_category: config
-    pin:
-      number: 4
-      inverted: true
-    restore_mode: ALWAYS_ON
-    internal: true
-
-  ##### Switch Display Sleep Modus #####
-  - platform: template
-    device_class: switch
-    name: ${device_name} Sleep Modus
-    id: sleep_modus
-    restore_state: true
-    assumed_state: false
-    optimistic: true
-    on_turn_off:
-      - lambda: id(disp1).send_command_printf("home.sleepmodus.val=0");
-      - globals.set:
-            id: sleep_modus_global
-            value: '0'
-      - lambda:  id(disp1).set_component_value("settings.a02",0);
-    on_turn_on:
-      - lambda: id(disp1).send_command_printf("home.sleepmodus.val=1");
-      - globals.set:
-            id: sleep_modus_global
-            value: '1'
-      - lambda:  id(disp1).set_component_value("settings.a02",1);
-
-#########################################
-#
-#
-#############################################################
-##### CLOSE - SWITCH #####
-#############################################################
-#
-##
-###
-#############################################################################################################################################################################################
-###
-##
-#
-#############################################################
-##### START - NUMBER #####
-#############################################################
-#
-#
-#########################################
-
-number:
-
-  ##### SCREEN BRIGHTNESS #####
-  - platform: template
-    name: ${device_name} Display Brightness
-    id: display_brightness
-    entity_category: config
-    unit_of_measurement: '%'
-    min_value: 1
-    max_value: 100
-    step: 1
-    restore_value: true
-    optimistic: true
-    set_action:
-      then:
-        - lambda: 'id(disp1).set_backlight_brightness(x/100);'
-        - lambda: 'id(disp1).send_command_printf("home.brightness.val=%i", int(x));'
-        - globals.set:
-            id: display_brightness_global
-            value: !lambda 'return int(x);'
-
-  ##### SCREEN BRIGHTNESS DIMMED DOWN #####
-  - platform: template
-    name: ${device_name} Display Brightness Dimdown
-    id: display_dim_brightness
-    entity_category: config
-    unit_of_measurement: '%'
-    min_value: 1
-    max_value: 100
-    step: 1
-    restore_value: true
-    optimistic: true
-    set_action:
-      then:
-        - lambda: 'id(disp1).send_command_printf("home.brightdd.val=%i", int(x));'
-        - globals.set:
-            id: display_dim_brightness_global
-            value: !lambda 'return int(x);'
-
-#########################################
-#
-#
-#############################################################
-##### CLOSE - NUMBER #####
-#############################################################
-#
-##
-###
-#############################################################################################################################################################################################
-###
-##
-#
-#############################################################
-##### START - DISPLAY START#####
-#############################################################
-#
-#
-#########################################
-
-display:
-  - platform: nextion
-    id: disp1
-    uart_id: tf_uart
-    tft_url: ${nextion_update_url}
-    on_setup:
-      then:
-        - lambda: id(disp1).send_command_printf("page 9"); ##### CHANGE! -  Loading page #####
-        - wait_until:
-            api.connected
-        - delay: 0.5s
-        - rtttl.play: "two short:d=4,o=5,b=100:16e6,16e6"
-        - delay: 0.5s
-        - switch.template.publish:
-            id: nextion_init
-            state: on
-        - lambda: id(disp1).send_command_printf("page 0"); #### home page #####
-        - delay: 2s ##### gives the display time to update other components & set the home page #####
-        - number.set:
-            id: display_brightness
-            value: !lambda 'return id(display_brightness_global);'
-        - number.set:
-            id: display_dim_brightness
-            value: !lambda 'return id(display_dim_brightness_global);'
-        - lambda: id(disp1).set_component_text_printf("settings.a03", "%i", id(display_brightness_global));
-        - lambda: id(disp1).set_component_text_printf("settings.a04", "%i", id(display_dim_brightness_global));
-        - lambda: id(disp1).send_command_printf("settings.brightslider.val=%i", id(display_brightness_global));
-        - lambda: id(disp1).send_command_printf("settings.dimslider.val=%i", id(display_dim_brightness_global));
-        - lambda: id(disp1).send_command_printf("home.sleepmodus.val=%i", id(sleep_modus_global));
-        - lambda: |-
-            id(disp1).set_component_value("settings.a02",0);
-            if (id(sleep_modus_global) == 1) 
-            {
-              id(disp1).set_component_value("settings.a02",1);
-            }
-        - lambda: |-
-            id(disp1).send_command_printf("home.a50.pic=53");
-            id(disp1).send_command_printf("thermostat.a50.pic=53");
-            id(disp1).send_command_printf("thermostat.a06.pic=50");
-            if (id(heating_room_global) == 1) 
-            {
-              id(disp1).send_command_printf("home.a52.pic=66");
-              id(disp1).send_command_printf("thermostat.a52.pic=66");
-              id(disp1).send_command_printf("thermostat.a06.pic=51");
-            }
-        - lambda: |-
-            if (id(hvac_mode_global) == 0) {
-              id(disp1).send_command_printf("home.a51.pic=53");
-              id(disp1).send_command_printf("thermostat.a51.pic=53");
-              id(disp1).send_command_printf("thermostat.a06.pic=49");
-            } else if (id(hvac_mode_global) == 1) {
-              id(disp1).send_command_printf("home.a51.pic=65");
-              id(disp1).send_command_printf("thermostat.a51.pic=65");
-              id(disp1).set_component_value("thermostat.a10",1);
-            }
-
-#############################################################
-##### CLOSE - DISPLAY START #####
-#############################################################
\ No newline at end of file