kleine aanpassingen

KennedyPegboard/Toolholders/multiconnect/basicBackSlot.py

@@ -7,6 +7,7 @@ set_port(3939)
 number_clips_horizontal = 3
 number_clips_vertical = 3
 
+
 # Distance hart to hart holes pegboard 1-1/2" or about 38.1 mm
 hdhh = hole_distance_hart_to_hart = 38.1
 wmh = width_multiconnector_hole = 20.3
@@ -37,30 +38,49 @@ def one_clip():
                 Polyline(pts)
             make_face()
         revolve(revolution_arc=180.0, axis=Axis.Z)
-    return backSlot.part
-
-# Add a straight part to it
-def extrusion_clip():
-    with BuildPart() as extrusion:
+        # Add a straight part to it
         with BuildSketch(Plane.XZ) as sk_extrusion:
             with BuildLine(Plane.XZ) as ln_extrusion:
                 Polyline(pts)
             make_face()
             mirror(about=Plane.YZ)
         extrude(amount = el)
-    return extrusion.part
+    return backSlot.part
+
+def connection_clip():
+    with BuildPart() as connection:
+        with BuildSketch(Plane.XZ) as sk_connection:
+            Rectangle(wmh+4, 2)
+        extrude(amount = 30)
+    return connection.part
 
 # Generate a raster of clips
 with BuildPart() as raster:
-    for i in range(number_clips_horizontal):
-        for j in range(number_clips_vertical):
+#    clip = one_clip()
+#    one_connection = connection_clip()
+#    for i in range(number_clips_horizontal):
+#        for j in range(number_clips_vertical):
             # Put the clips on the right locations
-            with Locations((i * hdhh, j * hdhh, 0)):
-                clip = one_clip()
-                add(clip)
-                # Connect the clips together
-                one_extrusion = extrusion_clip()
-                add(one_extrusion)
+#            with Locations((i * hdhh, j * hdhh, 0)):
+#    with GridLocations(x_spacing = hdhh, y_spacing = hdhh, x_count = number_clips_horizontal, y_count = number_clips_vertical):
+    with GridLocations(x_spacing = hdhh, y_spacing = hdhh, x_count = number_clips_horizontal, y_count = number_clips_vertical):
+        # Make a polyline sketch and revolve it 180 degrees
+        with BuildSketch(Plane.XZ) as sk_backSlot:
+            with BuildLine(Plane.XZ) as ln_backSlot:
+                Polyline(pts)
+            make_face()
+        revolve(revolution_arc=180.0, axis=Axis.Z)
+        # Add a straight part to it
+        with BuildSketch(Plane.XZ) as sk_extrusion:
+            with BuildLine(Plane.XZ) as ln_extrusion:
+                Polyline(pts)
+            make_face()
+            mirror(about=Plane.YZ)
+        extrude(amount = el)
+        # Connect the clips together
+#            with Locations((i * hdhh, j * hdhh - el, 1)):
+#                connection_clip()
+#                print(clip, one_connection)
     
 #export_stl(backSlot.part, "backSlot.stl")
 #export_step(backSlot.part, "backSlot.step")

KennedyPegboard/Toolholders/multiconnect/basicBackSlot_algebra.py

@@ -0,0 +1,38 @@
+from ocp_vscode import *
+from build123d import *
+
+set_port(3939)
+
+# Set the number of clips horizontal:
+number_clips_horizontal = 3
+number_clips_vertical = 3
+
+# Distance hart to hart holes pegboard 1-1/2" or about 38.1 mm
+hdhh = hole_distance_hart_to_hart = 38.1
+wmh = width_multiconnector_hole = 20.3
+dmh = depth_multiconnector_hole = 4.15
+dbr = depth_big_round = 1.2121
+dsr = depth_small_round = 0.4379
+db = depth_bevel = 2.5
+el = extrusion_length = 10.0
+
+pts = [
+    (0, 0),
+    ((wmh+4)/2, 0),
+    (((wmh+4)/2), dmh+2),
+    (((wmh+4)/2)-db-2, dmh+2),
+    (((wmh+4)/2)-db-2, dmh+2-dsr),
+    ((wmh+4)/2-2, dbr+2),
+    ((wmh+4)/2-2, 2),
+    (0, 2),
+    (0, 0)
+]
+
+# Make one basic connector
+
+
+
+
+#export_stl(backSlot.part, "backSlot_algebra.stl")
+#export_step(backSlot.part, "backSlot_algebra.step")
+show_all()

KennedyPegboard/Toolholders/multiconnect/oneclip.py

@@ -48,13 +48,20 @@ def one_clip():
 
 # Generate a raster of clips
 with BuildPart() as raster:
-    last_clip = None
-    for i in range(number_clips_horizontal):
-        for j in range(number_clips_vertical):
-            clip = one_clip()
-            # Put the clips on the right locations
-            with Locations((i * hdhh, j * hdhh, 0)):
-                add(clip)
+    with BuildSketch(Plane.XY.rotated((90, 0, 0))) as sk_backSlot:
+        with GridLocations(x_spacing = hdhh, y_spacing = hdhh, x_count = number_clips_horizontal, y_count = number_clips_vertical):
+        # Make a polyline sketch and revolve it 180 degrees
+            with BuildLine() as ln_backSlot:
+                Polyline(pts)
+            make_face()
+    revolve(revolution_arc=180.0, axis=Axis.Z)
+    # Add a straight part to it
+    with BuildSketch(Plane.XZ) as sk_extrusion:
+        with BuildLine(Plane.XZ) as ln_extrusion:
+            Polyline(pts)
+        make_face()
+        mirror(about=Plane.YZ)
+    extrude(amount = el)
     
 #export_stl(backSlot.part, "backSlot.stl")
 show_all()

KennedyPegboard/Toolholders/multiconnect/test.py

@@ -0,0 +1,39 @@
+from ocp_vscode import *
+from build123d import *
+
+set_port(3939)
+
+# Set the number of clips horizontal:
+number_clips_horizontal = 3
+number_clips_vertical = 3
+
+# Distance hart to hart holes pegboard 1-1/2" or about 38.1 mm
+hdhh = hole_distance_hart_to_hart = 38.1
+wmh = width_multiconnector_hole = 20.3
+dmh = depth_multiconnector_hole = 4.15
+dbr = depth_big_round = 1.2121
+dsr = depth_small_round = 0.4379
+db = depth_bevel = 2.5
+el = extrusion_length = 10.0
+
+pts = [
+    (0, 0),
+    ((wmh+4)/2, 0),
+    (((wmh+4)/2), dmh+2),
+    (((wmh+4)/2)-db-2, dmh+2),
+    (((wmh+4)/2)-db-2, dmh+2-dsr),
+    ((wmh+4)/2-2, dbr+2),
+    ((wmh+4)/2-2, 2),
+    (0, 2),
+    (0, 0)
+]
+
+first_part = Polyline(pts)
+
+with BuildPart() as backSlot:
+    with BuildSketch() as sk:
+        with GridLocations(x_spacing = hdhh, y_spacing = hdhh, x_count = number_clips_horizontal, y_count = number_clips_vertical):
+            Rectangle(2,4)
+    extrude(amount = 6)
+
+show_all()