Verveelvoudigingen clips gemaakt

KennedyPegboard/Toolholders/multiconnect/basicBackSlot.py

@@ -3,6 +3,10 @@ from build123d import *
 
 set_port(3939)
 
+# Set the number of clips horizontal:
+number_clips_horizontal = 3
+number_clips_vertical = 3
+
 # Distance hart to hart holes pegboard 1-1/2" or about 38.1 mm
 hdhh = hole_distance_hart_to_hart = 38.1
 wmh = width_multiconnector_hole = 20.3
@@ -25,6 +29,7 @@ pts = [
 ]
 
 # Make one basic connector
+def one_clip():
     with BuildPart() as backSlot:
         # Make a polyline sketch and revolve it 180 degrees
         with BuildSketch(Plane.XZ) as sk_backSlot:
@@ -32,13 +37,35 @@ with BuildPart() as backSlot:
                 Polyline(pts)
             make_face()
         revolve(revolution_arc=180.0, axis=Axis.Z)
-    # Add a straight part to it
-    with BuildSketch(Plane.XZ) as sk_extrusion:
-        with BuildLine(Plane.XZ) as ln_extrusion:
+#        # Add a straight part to it
+#        with BuildSketch(Plane.XZ) as sk_extrusion:
+#            with BuildLine(Plane.XZ) as ln_extrusion:
+#                Polyline(pts)
+#            make_face()
+#            mirror(about=Plane.YZ)
+#        extrude(amount = el)
+    return backSlot.part
+
+# Generate a raster of clips
+with BuildPart() as raster:
+    last_clip = None
+    for i in range(number_clips_horizontal):
+        for j in range(number_clips_vertical):
+            clip = one_clip()
+            # Put the clips on the right locations
+            with Locations((i * hdhh, j * hdhh, 0)):
+                add(clip)
+            # Connect the clips together
+            while True:
+                if last_clip is not None:
+                    with BuildSketch(Plane.XZ) as sk_connect:
+                        with BuildLine(Plane.XZ) as ln_connect:
                             Polyline(pts)
                         make_face()
                         mirror(about=Plane.YZ)
-    extrude(amount = el)
+                    extrude(until=Until.NEXT)
+                last_clip = clip
+                break
     
 #export_stl(backSlot.part, "backSlot.stl")
 show_all()

KennedyPegboard/Toolholders/multiconnect/oneclip.py

@@ -0,0 +1,60 @@
+from ocp_vscode import *
+from build123d import *
+
+set_port(3939)
+
+# Set the number of clips horizontal:
+number_clips_horizontal = 3
+number_clips_vertical = 3
+
+# Distance hart to hart holes pegboard 1-1/2" or about 38.1 mm
+hdhh = hole_distance_hart_to_hart = 38.1
+wmh = width_multiconnector_hole = 20.3
+dmh = depth_multiconnector_hole = 4.15
+dbr = depth_big_round = 1.2121
+dsr = depth_small_round = 0.4379
+db = depth_bevel = 2.5
+el = extrusion_length = 10.0
+
+pts = [
+    (0, 0),
+    ((wmh+4)/2, 0),
+    (((wmh+4)/2), dmh+2),
+    (((wmh+4)/2)-db-2, dmh+2),
+    (((wmh+4)/2)-db-2, dmh+2-dsr),
+    ((wmh+4)/2-2, dbr+2),
+    ((wmh+4)/2-2, 2),
+    (0, 2),
+    (0, 0)
+]
+
+# Make one basic connector
+def one_clip():
+    with BuildPart() as backSlot:
+        # Make a polyline sketch and revolve it 180 degrees
+        with BuildSketch(Plane.XZ) as sk_backSlot:
+            with BuildLine(Plane.XZ) as ln_backSlot:
+                Polyline(pts)
+            make_face()
+        revolve(revolution_arc=180.0, axis=Axis.Z)
+        # Add a straight part to it
+        with BuildSketch(Plane.XZ) as sk_extrusion:
+            with BuildLine(Plane.XZ) as ln_extrusion:
+                Polyline(pts)
+            make_face()
+            mirror(about=Plane.YZ)
+        extrude(amount = el)
+    return backSlot.part
+
+# Generate a raster of clips
+with BuildPart() as raster:
+    last_clip = None
+    for i in range(number_clips_horizontal):
+        for j in range(number_clips_vertical):
+            clip = one_clip()
+            # Put the clips on the right locations
+            with Locations((i * hdhh, j * hdhh, 0)):
+                add(clip)
+    
+#export_stl(backSlot.part, "backSlot.stl")
+show_all()