h3n3/3dprinters
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

jschuh klipper macros geupdated van zijn github

Browse Source
This commit is contained in:
Hendrie Bosch
2024-05-18 20:09:57 +02:00
parent 8dc926e5d4
commit d0e7d8800d
48 changed files with 5949 additions and 3003 deletions
Download Patch File Download Diff File Expand all files Collapse all files

69
klipper/DNV-TPU-Ender3/klipper_config/bed_mesh_org.cfg
View File

@@ -1,69 +0,0 @@
# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
#
# Credit to original source:
# https://gist.github.com/ChipCE/95fdbd3c2f3a064397f9610f915f7d02
[gcode_macro bed_mesh_calibrate]
rename_existing: _KM_BED_MESH_CALIBRATE_BASE
description: Wraps BED_MESH_CALIBRATE, scaling probe count to specified area.
Usage: See Klipper documentation.
gcode:
{% set km = printer["gcode_macro _km_globals"] %}
{% set probe_mesh_padding = km.probe_mesh_padding %}
{% set probe_min_count = km.probe_min_count %}
{% set probe_count_scale = km.probe_count_scale %}
{% set bed_mesh = printer.configfile.config.bed_mesh %}
# don't have the math functions available to work on a delta bed.
{%if "mesh_radius" not in bed_mesh %}
{% set safe_min_x = bed_mesh.mesh_min.split(",")[0]|float %}
{% set safe_min_y = bed_mesh.mesh_min.split(",")[1]|float %}
{% set safe_max_x = bed_mesh.mesh_max.split(",")[0]|float %}
{% set safe_max_y = bed_mesh.mesh_max.split(",")[1]|float %}
{% if "MESH_MIN" in params %}
{% set mesh_min_x = (params.MESH_MIN.split(",")[0]|float -
probe_mesh_padding, safe_min_x)|max %}
{% set mesh_min_y = (params.MESH_MIN.split(",")[1]|float -
probe_mesh_padding, safe_min_y)|max %}
{% else %}
{% set mesh_min_x = safe_min_x %}
{% set mesh_min_y = safe_min_y %}
{% endif %}
{% if "MESH_MAX" in params %}
{% set mesh_max_x = (params.MESH_MAX.split(",")[0]|float +
probe_mesh_padding, safe_max_x)|min %}
{% set mesh_max_y = (params.MESH_MAX.split(",")[1]|float +
probe_mesh_padding, safe_max_y)|min %}
{% else %}
{% set mesh_max_x = safe_max_x %}
{% set mesh_max_y = safe_max_y %}
{% endif %}
{% set max_x_probes = (params.PROBE_COUNT |
default(bed_mesh.probe_count)).split(",")[0]|int %}
{% set max_y_probes = (params.PROBE_COUNT |
default(bed_mesh.probe_count)).split(",")[1]|int %}
{% set x_probes = (max_x_probes * (mesh_max_x - mesh_min_x) /
(safe_max_x - safe_min_x) * probe_count_scale)
| round(0) | int %}
{% set x_probes = ((x_probes, probe_min_count)|max, max_x_probes)|min %}
{% set y_probes = (max_y_probes * (mesh_max_y - mesh_min_y ) /
(safe_max_y - safe_min_y) * probe_count_scale )
| round(0) | int %}
{% set y_probes = ((y_probes, probe_min_count)|max, max_y_probes)|min %}
{% set dummy = params.__setitem__("MESH_MIN", mesh_min_x~","~mesh_min_y) %}
{% set dummy = params.__setitem__("MESH_MAX", mesh_max_x~","~mesh_max_y) %}
{% set dummy = params.__setitem__("PROBE_COUNT", x_probes~","~y_probes) %}
{% endif %}
_km_bed_mesh_calibrate_base{%for k in params%}{
' '~k~'="'~params[k]~'"'}{%endfor%}
[gcode_macro g29]
gcode:
BED_MESH_CALIBRATE

0
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/LICENSE → klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/LICENSE
View File

1170
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/README.md Normal file
View File

File diff suppressed because it is too large Load Diff

226
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/bed_mesh_fast.cfg Normal file
View File

@@ -0,0 +1,226 @@
# Copyright (C) 2023 Justin Schuh <code@justinschuh.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
#
# Credit to original inspiration:
# https://gist.github.com/ChipCE/95fdbd3c2f3a064397f9610f915f7d02
[gcode_macro bed_mesh_calibrate_fast]
description: Wraps BED_MESH_CALIBRATE, scaling probe count to specified area.
Usage: See Klipper documentation.
gcode:
# Abort on a bad config.
BED_MESH_CHECK ABORT=1
# Find the real bed_mesh_calibrate command.
{% set calibrate_cmd =
(printer["gcode_macro list_macros"].macros.bed_mesh_calibrate|
default(["bed_mesh_calibrate"],True))[-1] %}
{% set km = printer["gcode_macro _km_globals"] %}
{% set probe_mesh_padding = km.probe_mesh_padding %}
{% set probe_min_count = km.probe_min_count %}
{% set probe_count_scale = km.probe_count_scale %}
{% set bed_mesh = printer.configfile.settings.bed_mesh %}
# TODO: Handle the math for a delta bed.
{%if "mesh_radius" not in bed_mesh and
"MESH_RADIUS" not in params %}
{% set safe_min_x = bed_mesh.mesh_min[0] %}
{% set safe_min_y = bed_mesh.mesh_min[1] %}
{% set safe_max_x = bed_mesh.mesh_max[0] %}
{% set safe_max_y = bed_mesh.mesh_max[1] %}
# Always bound MESH_MIN and MESH_MAX.
{% if "MESH_MIN" in params %}
{% set mesh_min_x = (params.MESH_MIN.split(",")[0]|float -
probe_mesh_padding, safe_min_x)|max %}
{% set mesh_min_y = (params.MESH_MIN.split(",")[1]|float -
probe_mesh_padding, safe_min_y)|max %}
{% else %}
{% set mesh_min_x = safe_min_x %}
{% set mesh_min_y = safe_min_y %}
{% endif %}
{% if "MESH_MAX" in params %}
{% set mesh_max_x = (params.MESH_MAX.split(",")[0]|float +
probe_mesh_padding, safe_max_x)|min %}
{% set mesh_max_y = (params.MESH_MAX.split(",")[1]|float +
probe_mesh_padding, safe_max_y)|min %}
{% else %}
{% set mesh_max_x = safe_max_x %}
{% set mesh_max_y = safe_max_y %}
{% endif %}
{% set probe_count = bed_mesh.probe_count if not params.PROBE_COUNT else
params.PROBE_COUNT.split(",")|map('int')|list %}
# Don't scale the probe count if one was explicitly provided.
{% if "PROBE_COUNT" not in params %}
{% set max_x_probes = probe_count[0] %}
{% set max_y_probes = probe_count[-1] %}
{% set x_probes = (max_x_probes * (mesh_max_x - mesh_min_x) /
(safe_max_x - safe_min_x) * probe_count_scale)
| round(0) | int %}
{% set x_probes = ((x_probes, probe_min_count)|max, max_x_probes)|min %}
{% set y_probes = (max_y_probes * (mesh_max_y - mesh_min_y ) /
(safe_max_y - safe_min_y) * probe_count_scale )
| round(0) | int %}
{% set y_probes = ((y_probes, probe_min_count)|max, max_y_probes)|min %}
# Add probes for bicubic if one axis has too many probes for lagrange.
{% if x_probes > 6 and y_probes < 4 %}
{% set y_probes = 4 %}
{% elif y_probes > 6 and x_probes < 4 %}
{% set x_probes = 4 %}
{% endif %}
{% set probe_count = [x_probes,y_probes] %}
{% elif probe_count|length == 1 %}
{% set dummy = probe_count.append(probe_count[0]) %}
{% endif %}
# If the config includes a relative_reference_index then we need to find the
# point in the new mesh that's closest to the index point in the mesh that
# the config would have generated.
# TODO: Could also adjust the mesh parameters in here to ensure it includes
# the original index point, but that would be extra work and would cause
# slower probes if the mesh needs to be expanded to include the point.
{% if "relative_reference_index" in bed_mesh %}
{% set row = (bed_mesh.relative_reference_index / bed_mesh.probe_count[0]
)|int%}
{% set rrf_x = (((safe_max_x - safe_min_x) /
(bed_mesh.probe_count[0] - 1))|round(2, 'floor')) *
(bed_mesh.relative_reference_index %
bed_mesh.probe_count[-1]) %}
{% if row % 2 %}
{% set rrf_x = safe_max_x - rrf_x %}
{% else %}
{% set rrf_x = safe_min_x + rrf_x %}
{% endif %}
{% set rrf_y = (((safe_max_y - safe_min_y) /
(bed_mesh.probe_count[-1] - 1))|round(2, 'floor')) *
row + safe_min_x %}
{% set x_dist = (mesh_max_x - mesh_min_x) / (probe_count[0] - 1) %}
{% set y_dist = (mesh_max_y - mesh_min_y) / (probe_count[1] - 1) %}
{% set rrf = {'x':0, 'y':0, 'dist':safe_max_x**2+safe_max_y**2,'pos':0} %}
{% for row in range(probe_count[1])%}
{% for col in range(probe_count[0])%}
{% if row % 2 %}
{% set x = mesh_max_x - col * x_dist %}
{% else %}
{% set x = mesh_min_x + col * x_dist %}
{% endif %}
{% set y = mesh_min_y + row * y_dist %}
{% set dist = ((x - rrf_x)**2 + (y - rrf_y)**2)**0.5 %}
{% if dist < rrf.dist %}
{% set dummy = rrf.__setitem__("dist", dist) %}
{% set dummy = rrf.__setitem__("x", x) %}
{% set dummy = rrf.__setitem__("y", y) %}
{% set dummy = rrf.__setitem__("pos", row * probe_count[1] + col) %}
{% endif %}
{% endfor %}
{% endfor %}
{% if rrf.x != rrf_x or rrf.y != rrf_y %}
{action_respond_info("relative_reference_index remapped to"
" %d (%.2f,%.2f) from %d (%.2f,%.2f)" %
(rrf.pos, rrf.x, rrf.y,
bed_mesh.relative_reference_index, rrf_x, rrf_y))}
{% endif %}
{% set dummy = params.__setitem__("RELATIVE_REFERENCE_INDEX", rrf.pos) %}
{% endif %}
{% set dummy = params.__setitem__("MESH_MIN", mesh_min_x~","~mesh_min_y) %}
{% set dummy = params.__setitem__("MESH_MAX", mesh_max_x~","~mesh_max_y) %}
{% set dummy = params.__setitem__("PROBE_COUNT", probe_count|join(',')) %}
# Force bicubic if we've exceeded the max for lagrange.
{% if probe_count[0] > 6 or probe_count[1]|default(0) > 6 %}
{% set dummy = params.__setitem__("ALGORITHM", "bicubic") %}
{% endif %}
# Warn on bad parameters that were fixed.
{% if "MESH_MIN" in params or "MESH_MAX" in params %}
BED_MESH_CHECK {rawparams}
{% endif %}
{% else %}
# Mesh limits may be out of bounds, so strip them from the fallback path.
{% set dummy = params.__delitem__("MESH_MIN") %}
{% set dummy = params.__delitem__("MESH_MAX") %}
{% endif %}
# Abort on bad parameters.
{% if "MESH_MIN" in params or "MESH_MAX" in params %}
BED_MESH_CHECK ABORT=1{%for k in params%}{' '~k~'="'~params[k]~'"'}{%
endfor%}
{% endif %}
_KM_PRINT_STATUS ACTION=PUSH_STATUS
_KM_PRINT_STATUS ACTION=CHANGE STATUS=meshing
{calibrate_cmd}{%for k in params%}{' '~k~'="'~params[k]~'"'}{%endfor%}
_KM_PRINT_STATUS ACTION=CHANGE STATUS=pop_status
[gcode_macro bed_mesh_check]
description: Warns if bed_mesh config may generate an invalid mesh.
Usage: BED_MESH_CHECK [MESH_MIN=<x,y>] [MESH_MAX=<x,y>] [ABORT=<0|1>]
gcode:
{% if printer.bed_mesh is defined %}
{% set action = action_respond_info if params.ABORT|default(0)|int == 0 else
action_raise_error %}
{% set settings = printer.configfile.settings %}
{% set x_min = settings.stepper_x.position_min %}
{% set y_min = settings.stepper_y.position_min %}
{% set x_max = settings.stepper_x.position_max %}
{% set y_max = settings.stepper_y.position_max %}
{% set label = "[bed_mesh] config" %}
{% if "MESH_MIN" in params %}
{% set label = "BED_MESH_CALIBRATE params" %}
{% set mesh_min_x = params.MESH_MIN.split(",")[0]|float %}
{% set mesh_min_y = params.MESH_MIN.split(",")[1]|float %}
{% else %}
{% set mesh_min_x = settings.bed_mesh.mesh_min[0] %}
{% set mesh_min_y = settings.bed_mesh.mesh_min[1] %}
{% endif %}
{% if "MESH_MAX" in params %}
{% set label = "BED_MESH_CALIBRATE params" %}
{% set mesh_max_x = params.MESH_MAX.split(",")[0]|float %}
{% set mesh_max_y = params.MESH_MAX.split(",")[1]|float %}
{% else %}
{% set mesh_max_x = settings.bed_mesh.mesh_max[0] %}
{% set mesh_max_y = settings.bed_mesh.mesh_max[1] %}
{% endif %}
{% if "bltouch" in settings %}
{% set x_offset = settings.bltouch.x_offset %}
{% set y_offset = settings.bltouch.y_offset %}
{% set probe = "bltouch" %}
{% elif "probe" in settings %}
{% set x_offset = settings.probe.x_offset %}
{% set y_offset = settings.probe.y_offset %}
{% set probe = "probe" %}
{% else %}
{% set x_offset = 0.0 %}
{% set y_offset = 0.0 %}
{% endif %}
{% set output = [] %}
{% set warn =
"* mesh_%s (%f, %f) adjusted by " ~ probe ~
".%s_offset (%f) can move out of range for "
"stepper_%s.position_%s (%f)." %}
{% if x_offset > 0 and (mesh_min_x - x_offset) < x_min %}
{% set dummy = output.append(warn % ('min', mesh_min_x, mesh_min_y,
'x', x_offset, 'x', 'min', x_min)) %}
{% elif x_offset < 0 and (mesh_max_x - x_offset) > x_max %}
{% set dummy = output.append(warn % ('max', mesh_max_x, mesh_max_y,
'x', x_offset, 'x', 'max', x_max)) %}
{% endif %}
{% if y_offset > 0 and (mesh_min_y - y_offset) < y_min %}
{% set dummy = output.append(warn % ('min', mesh_min_x, mesh_min_y,
'y', y_offset, 'y', 'min', y_min)) %}
{% elif y_offset < 0 and (mesh_max_y - y_offset) > y_max %}
{% set dummy = output.append(warn % ('max', mesh_max_x, mesh_max_y,
'y', y_offset, 'y', 'max', y_max)) %}
{% endif %}
{% if output %}
{ action(
"Warning: The following issue(s) were detected in your " ~ label ~
":\n" ~ output|join("\n")) }
{% endif %}
{% endif %}

287
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/bed_surface.cfg Normal file
View File

@@ -0,0 +1,287 @@
# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
#
# Credit to original inspiration:
# https://klipper.discourse.group/t/saving-and-adjusting-per-build-surface-z-offsets/696
[gcode_macro _apply_bed_surface_offset]
gcode:
{% set surfaces = printer.save_variables.variables.bed_surfaces %}
{% if surfaces.active %}
SET_SURFACE_ACTIVE SURFACE={surfaces.active}
{% endif %}
[gcode_macro _init_surfaces]
gcode:
{% set km = printer["gcode_macro _km_globals"] %}
{% if "bed_surfaces" in printer.save_variables.variables %}
{% set old_surfaces = printer.save_variables.variables.bed_surfaces %}
{% else %}
{% set old_surfaces = { 'active' : '', 'available' : {} } %}
{% endif %}
{% set settings = printer.configfile.settings %}
{% set new_probe_z = (settings.probe | default(settings.bltouch) |
default(settings.smart_effector) | default({})
).z_offset|default(0.0)|float %}
{% set new_endstop_z = (settings.stepper_z | default({})).position_endstop |
default(0.0)|float %}
{% if 'endstop_z' not in old_surfaces %}
{% set dummy = old_surfaces.__setitem__('endstop_z', new_endstop_z) %}
{% endif %}
{% if 'probe_z' not in old_surfaces %}
{% set dummy = old_surfaces.__setitem__('probe_z', new_probe_z) %}
{% endif %}
{% set surfaces = { 'active' : '', 'available' : {},
'endstop_z' : old_surfaces.endstop_z,
'probe_z' : old_surfaces.probe_z } %}
{% for s in km.bed_surfaces %}
{% set s = s.split()|join(' ')|lower %}
{% if s|length > km.bed_surface_max_name_length or
s|list|select("in", " \r\n\"\'")|list %}
{action_raise_error('Invalid surface name "%s". Name must be %d or fewer '
'characters and must not include space or quotation characters'
| format(s, km.bed_surface_max_name_length))}
{% endif %}
{% if s in old_surfaces.available %}
{% set dummy = surfaces.available.__setitem__(s,
old_surfaces.available[s]) %}
{% else %}
{% set dummy = surfaces.available.__setitem__(s, {'offset' : 0.0}) %}
{% endif %}
{% endfor %}
{% if old_surfaces.active in surfaces.available %}
{% set dummy = surfaces.__setitem__('active', old_surfaces.active) %}
{% elif km.bed_surfaces %}
{% set dummy = surfaces.__setitem__('active', km.bed_surfaces[0]|lower) %}
{% endif %}
SAVE_VARIABLE VARIABLE=bed_surfaces VALUE="{surfaces}"
_APPLY_BED_SURFACE_OFFSET
{% if new_probe_z != surfaces.probe_z or
new_endstop_z != surfaces.endstop_z %}
{ action_respond_info(
'Z probe offset or endstop position changed. Run ADJUST_SURFACE_OFFSETS '
'to adjust the offset for all saved surfaces by the change differential, '
'or run ADJUST_SURFACE_OFFSETS IGNORE=1 to hide this message without '
'making changes.') }
{% endif %}
[gcode_macro adjust_surface_offsets]
description: Adjusts surface offsets to account for changes in the Z endstop
position or probe Z offset.
Usage: ADJUST_SURFACE_OFFSETS [IGNORE]
gcode:
{% set surfaces = printer.save_variables.variables.bed_surfaces %}
{% set settings = printer.configfile.settings %}
{% set new_probe_z = (settings.probe | default(settings.bltouch) |
default(settings.smart_effector) | default({})
).z_offset|default(0.0)|float %}
{% set new_endstop_z = (settings.stepper_z | default({})).position_endstop |
default(0.0)|float %}
{% set diff = (surfaces.probe_z - new_probe_z +
surfaces.endstop_z - new_endstop_z)|round(6) %}
{% if not params.IGNORE|default(0)|int %}
{% for s in surfaces.available %}
{% set offset = (surfaces.available[s].offset - diff)|round(6) %}
{% set dummy = surfaces.available.__setitem__(s, {'offset' : offset}) %}
{% endfor %}
{ action_respond_info("All bed surfaces now adjusted by %1.4f"|
format(diff))}
{% elif diff != 0 %}
{ action_respond_info("Status cleared without adjustment") }
{% endif %}
{% set dummy = surfaces.__setitem__('endstop_z', new_endstop_z| round(6)) %}
{% set dummy = surfaces.__setitem__('probe_z', new_probe_z|round(6)) %}
SAVE_VARIABLE VARIABLE=bed_surfaces VALUE="{surfaces}"
[gcode_macro set_surface_offset]
description: Sets the offset for a surface and moves the toolhead (if homed).
Usage: SET_SURFACE_OFFSET [OFFSET=<offset>] [SURFACE=<surface>]
gcode:
{% set surfaces = printer.save_variables.variables.bed_surfaces %}
{% set SURFACE = params.SURFACE|default(surfaces.active)|lower %}
{% if SURFACE not in surfaces.available %}
{ action_raise_error("Bed surface %s does not exist." | format(SURFACE)) }
{% endif %}
{% set active = surfaces.available[SURFACE] %}
# If no offset is provided just print out the current offset.
{% set OFFSET = params.OFFSET|default(active.offset)|float %}
{% if OFFSET != active.offset %}
{% set dummy = surfaces.available[SURFACE].__setitem__("offset", OFFSET) %}
SAVE_VARIABLE VARIABLE=bed_surfaces VALUE="{surfaces}"
{% if SURFACE == surfaces.active %}
_km_set_gcode_offset_base Z="{OFFSET}" MOVE={
1 if printer.toolhead.homed_axes == 'xyz' else 0}
{% endif %}
{% endif %}
{ action_respond_info("Bed surface: %s Offset: %.3f"
| format(SURFACE, OFFSET)) }
# Dummy argument block for Mainsail
{% set dummy = None if True else "
{% set dummy = params.SURFACE|default(active surface) %}
{% set dummy = params.OFFSET|default(none)|float %}
" %} # End argument block for Mainsail
[gcode_macro set_surface_active]
description: Sets the active bed surface and moves the toolhead (if homed). If
no SURFACE argument is present the available surfaces are listed and the
active one is preceded by a "*".
Usage: SET_SURFACE_ACTIVE [SURFACE=<surface>]
gcode:
{% set surfaces = printer.save_variables.variables.bed_surfaces %}
{% if "SURFACE" in params %}
{% set SURFACE = params.SURFACE|lower %}
{% if SURFACE not in surfaces.available %}
{ action_raise_error("Bed surface %s does not exist." | format(SURFACE)) }
{% endif %}
{% if SURFACE != surfaces.active %}
{% set dummy = surfaces.__setitem__("active", SURFACE) %}
SAVE_VARIABLE VARIABLE=bed_surfaces VALUE="{surfaces}"
{% endif %}
{% if surfaces.available[SURFACE].offset !=
printer.gcode_move.homing_origin.z %}
_km_set_gcode_offset_base Z="{surfaces.available[SURFACE].offset
}" MOVE={1 if printer.toolhead.homed_axes == 'xyz' else 0}
{% endif %}
{action_respond_info("Active bed surface: %s; offset: %.3f"
| format(SURFACE, surfaces.available[SURFACE].offset))}
{% else %}
{% set output = [] %}
{% for s in surfaces.available|list|sort %}
{% set dummy = output.append("%s&nbsp;%s - offset: %.3f"
| format("*" if s == surfaces.active else "&nbsp;",
s, surfaces.available[s].offset)) %}
{% endfor %}
{action_respond_info(output|join('\n'))}
{% endif %}
# Dummy argument block for Mainsail
{% set dummy = None if True else "
{% set dummy = params.SURFACE|default(none) %}
" %} # End argument block for Mainsail
[gcode_macro set_gcode_offset]
description: Wraps SET_GCODE_OFFSET to update the current bed sheet offset.
Usage: SET_GCODE_OFFSET [X=<pos>|X_ADJUST=<adjust>]
[Y=<pos>|Y_ADJUST=<adjust>]
[Z=<pos>|Z_ADJUST=<adjust>]
[MOVE=1 [MOVE_SPEED=<speed>]]
rename_existing: _KM_SET_GCODE_OFFSET_BASE
gcode:
{% set surfaces = printer.save_variables.variables.bed_surfaces %}
{% if surfaces.active and
not printer["gcode_macro _km_save_state"].is_ephemeral %}
{% set Z = params.Z|default(0.0)|float|round(6) %}
{% set Z_ADJUST = params.Z_ADJUST|default(0.0)|float %}
{% if 'Z' in params and
Z != surfaces.available[surfaces.active].offset %}
{% set dummy = surfaces.available[surfaces.active].__setitem__("offset",
Z) %}
SAVE_VARIABLE VARIABLE=bed_surfaces VALUE="{surfaces}"
{% elif Z_ADJUST != 0.0 %}
{% set dummy = surfaces.available[surfaces.active].__setitem__(
"offset", (Z_ADJUST + printer.gcode_move.homing_origin.z)|round(6)) %}
SAVE_VARIABLE VARIABLE=bed_surfaces VALUE="{surfaces}"
{% endif %}
{% endif %}
_km_set_gcode_offset_base{% for k in params%}{' '~k~'="'~params[k]~'"'
}{% endfor %}
[gcode_macro make_surface_mesh]
description: Generates and saves a mesh to automatically load in PRINT_START.
Usage: MAKE_SURFACE_MESH [SURFACE=<surface>] [BED=<probing temperature>]
[EXTRUDER=<probing temperature>]
[MESH_MULTIPLIER=<integer multiple of mesh density>]
[bed_mesh_calibrate parameters]
gcode:
{% set surfaces = printer.save_variables.variables.bed_surfaces %}
{% set SURFACE = params.SURFACE|default(surfaces.active)|lower %}
{% if SURFACE not in surfaces.available %}
{ action_raise_error("Bed surface %s does not exist." | format(SURFACE)) }
{% endif %}
{% set dummy = params.__setitem__('PROFILE', SURFACE) %}
{% set BED = params.BED|default(70) | int %}
{% set km = printer["gcode_macro _km_globals"] %}
{% set EXTRUDER = params.EXTRUDER|default(km.start_extruder_probing_temp) |
int %}
{% set MESH_MULTIPLIER = (params.MESH_MULTIPLIER|default(2)|int, 1)|max %}
M104 S{EXTRUDER}
M140 S{BED}
G28
# Adjust offset before running mesh
{% if surfaces.available[SURFACE].offset !=
printer.gcode_move.homing_origin.z %}
_km_set_gcode_offset_base Z="{surfaces.available[SURFACE].offset
}" MOVE=1
{% endif %}
# If no offset is provided just print out the current offset.
{% if BED > 0 %}
{action_respond_info("Stabilizing bed at %iC" | format(BED,))}
_KM_PARK_IF_NEEDED HEATER=heater_bed RANGE=0.5
{% if BED < (printer.heater_bed.temperature - 0.2) %}
M190 R{BED}
G4 P{((km.start_bed_heat_delay * 10, 30000)|min,
km.start_bed_heat_delay)|max}
{% else %}
G4 P{km.start_bed_heat_delay}
{% endif %}
M190 R{BED}
{% endif %}
{% if EXTRUDER > 0 %}
_KM_PARK_IF_NEEDED HEATER={printer.toolhead.extruder} RANGE=2
M109 R{km.start_extruder_probing_temp}
{% endif %}
{% if km.start_home_z_at_temp and not bed_at_target %}
G28 Z # Re-home only the Z axis now that the bed has stabilized.
{% endif %}
# Scale the mesh grid size while preserving the original points and relative
# reference index.
{% set probe_count = printer.configfile.settings.bed_mesh.probe_count
if not params.PROBE_COUNT else
params.PROBE_COUNT.split(",")|map('int')|list %}
{% set dummy = params.__setitem__('PROBE_COUNT',(
MESH_MULTIPLIER * (probe_count[0] - 1) + 1,
MESH_MULTIPLIER * (probe_count[-1] - 1) + 1,)|join(',')) %}
BED_MESH_CLEAR
BED_MESH_CALIBRATE_FAST {%
for k in params|reject('in',['BED','SURFACE'])|list %}{
' ' ~ k ~ '=' ~ params[k] }{% endfor %}
SAVE_CONFIG
# Dummy argument block for Mainsail
{% set dummy = None if True else "
{% set dummy = params.MESH_MULTIPLIER|default(2) %}
{% set dummy = params.SURFACE|default(active surface) %}
" %} # End argument block for Mainsail
[gcode_macro load_surface_mesh]
description: Attempts to load a mesh associated with the specified surface.
Usage: LOAD_SURFACE_MESH [SURFACE=<surface>]
gcode:
{% set surfaces = printer.save_variables.variables.bed_surfaces %}
{% set SURFACE = params.SURFACE|default(surfaces.active)|lower %}
{% if SURFACE != surfaces.active %}
SET_SURFACE_ACTIVE SURFACE={SURFACE}
{% endif %}
{% if SURFACE in printer.bed_mesh.profiles %}
{% set mesh = printer.bed_mesh.profiles[SURFACE].mesh_params %}
{% set default = printer.configfile.settings.bed_mesh %}
# Ensure the saved mesh has at least the resolution of the default.
{% if mesh.min_x <= (default.mesh_min[0] + 0.5) and
mesh.min_y <= (default.mesh_min[1] + 0.5) and
mesh.max_x >= (default.mesh_max[0] - 0.5) and
mesh.max_y >= (default.mesh_max[1] - 0.5) and
mesh.x_count >= default.probe_count[0] and
mesh.y_count >= default.probe_count[-1] %}
# Skip the bed level if we have a good profile.
BED_MESH_PROFILE LOAD={SURFACE}
{action_respond_info("Loaded mesh: %s" | format(SURFACE,))}
{% endif %}
{% endif %}

30
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/beep.cfg Normal file
View File

@@ -0,0 +1,30 @@
# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
[gcode_macro m300]
description: Emits and audible beep.
Usage: M300 [P<duration>] [S<frequency>]
gcode:
{% set settings = printer.configfile.settings %}
{% if "output_pin beeper" in printer or "pwm_cycle_time beeper" in printer %}
{% set P = (params.P|default(100)|int, 0)|max %}
{% set S = (params.S|default(1000)|int, 1)|max %}
SET_PIN PIN=beeper VALUE={% if "output_pin beeper" in settings %}1{%else%}{
settings["pwm_cycle_time beeper"].scale|default(1.0) * 0.5
} CYCLE_TIME={ 1.0 / S }{% endif %}
G4 P{P}
SET_PIN PIN=beeper VALUE=0
{% else %}
{action_respond_info(
"M300 is disabled. To enable create an [pwm_cycle_time beeper] config.")}
{% endif %}
[gcode_macro _km_beep_if_available]
description: Wraps beeper to avoid console spam
gcode:
{% if "output_pin beeper" in printer or "pwm_cycle_time beeper" in printer %}
{% for i in range(params.BEEPS|int) %}
M300 P100
G4 P200
{% endfor %}
{% endif %}

130
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/draw.cfg Normal file
View File

@@ -0,0 +1,130 @@
# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
[gcode_macro set_draw_params]
description: Sets the default parameters used by DRAW_LINE_TO.
Usage: SET_DRAW_PARAMS [HEIGHT=<mm>] [WIDTH=<mm>] [FEEDRATE=<mm/m>]
variable_height: 0.2
variable_width: 0.0 # Set to nozzle_diameter at startup
variable_feedrate: 1200
gcode:
{% set dparams = printer["gcode_macro set_draw_params"] %}
{% for k in params %}
{% set kl = k|lower %}
{% if kl in dparams %}
{% if dparams[kl] is float %}
{% set v = params[k]|float %}
{% elif dparams[kl] is integer %}
{% set v = params[k]|int %}
{% endif %}
SET_GCODE_VARIABLE MACRO=set_draw_params VARIABLE={kl} VALUE="{v}"
{% endif %}
{% endfor %}
[gcode_macro draw_line_to]
description: Extrudes a line of filament at the specified height and width from
the current coordinate to the supplied XY coordinate. (The height is used only
to calculate the extrusion volume.)
Usage: DRAW_LINE_TO [X=<pos>] [Y=<pos>] [HEIGHT=<mm>] [WIDTH=<mm>]
[FEEDRATE=<mm/m>]
gcode:
{% set dparams = printer["gcode_macro set_draw_params"] %}
{% set position = printer.gcode_move.gcode_position %}
{% set X = params.X|default(position.x)|float %}
{% set Y = params.Y|default(position.y)|float %}
{% set HEIGHT = params.HEIGHT|default(dparams.height)|float %}
{% set WIDTH = params.WIDTH|default(dparams.width)|float %}
{% set FEEDRATE = params.FEEDRATE|default(dparams.feedrate)|int %}
{% set distance = ((X - position.x) ** 2 + (Y - position.y) ** 2) ** 0.5 %}
{% set filament_area = 3.14159 *
(printer.configfile.settings[
printer.toolhead.extruder].filament_diameter ** 2) / 4 %}
{% set E = distance * ((WIDTH * HEIGHT) / filament_area) %}
# Use the base state call here so offset adjustments get persisted.
_KM_SAVE_GCODE_STATE NAME=_KM_PURGE
G90
G92 E0.0
G1 X{"%.3f" % X} Y{"%.3f" % Y} E{"%.5f" % E} F{FEEDRATE}
_KM_RESTORE_GCODE_STATE NAME=_KM_PURGE MOVE=0
[gcode_macro draw_purge_line]
description: Purges the specified length of filament as a line (or rows of
lines) in front of the supplied print area. If no print area is specified the
purge lines are drawn at the front edge of the maximum printable area. If no
printable area is set it defaults to the XY axis limits.
Usage: DRAW_PURGE_LINE [PRINT_MIN=<X,Y>] [PRINT_MAX=<X,Y>] [HEIGHT=<mm>]
[WIDTH=<mm>] [LENGTH=<mm>]
gcode:
# TODO: Make this work for delta printers.
{% set km = printer["gcode_macro _km_globals"] %}
{% set origin = printer.gcode_move.homing_origin %}
{% set dummy = km.__setitem__('print_min', (km.print_min[0] - origin.x,
km.print_min[1] - origin.y)) %}
{% set dummy = km.__setitem__('print_max', (km.print_max[0] - origin.x,
km.print_max[1] - origin.y)) %}
{% if "PRINT_MIN" in params %}
{% set PRINT_MIN = (
(params.PRINT_MIN.split(",")[0]|float, km.print_min[0])|max,
(params.PRINT_MIN.split(",")[1]|float, km.print_min[1])|max
) %}
{% else %}
{% set PRINT_MIN = km.print_min %}
{% endif %}
{% if "PRINT_MAX" in params %}
{% set PRINT_MAX = (
(params.PRINT_MAX.split(",")[0]|float, km.print_max[0])|min,
(params.PRINT_MAX.split(",")[1]|float, km.print_max[1])|min
) %}
{% else %}
{% set PRINT_MAX = km.print_max %}
{% endif %}
{% set extruder = printer.toolhead.extruder|string %}
{% set HEIGHT = params.HEIGHT|default(
printer.configfile.settings[extruder].nozzle_diameter * 0.625)|float %}
{% set WIDTH = params.WIDTH|default(
printer.configfile.settings[extruder].nozzle_diameter * 1.25)|float %}
{% set LENGTH = params.LENGTH|default(km.start_purge_length)|float %}
{% set dparams = printer["gcode_macro set_draw_params"] %}
{% set filament_area = 3.14159 *
(printer.configfile.settings[extruder].filament_diameter ** 2) / 4 %}
{% set purge_length = (LENGTH * filament_area) / (WIDTH * HEIGHT) %}
{% set printable_length = PRINT_MAX[0] - PRINT_MIN[0] %}
{% set purge_rows = (purge_length / printable_length)|round(0,'ceil')|int %}
{% set printable_inset = (printable_length - purge_length / purge_rows) / 2 %}
{% set PRINT_MIN = (PRINT_MIN[0] + printable_inset, PRINT_MIN[1]) %}
{% set PRINT_MAX = (PRINT_MAX[0] - printable_inset, PRINT_MAX[1]) %}
# This will purge into the print area when the bed is filled to the front.
{% set y_start = (km.print_min[1], PRINT_MIN[1] - km.start_purge_clearance -
(purge_rows + 0.5) * WIDTH )|max %}
G90
# Jog to the front left corner to get strings out of the print area.
G1 X{"%.3f" % (PRINT_MIN[0] - 30, km.print_min[0])|max} Y{
"%.3f" % (y_start - 10, km.print_min[1])|max} F{km.travel_speed_xy}
# Move to the starting corner.
G1 X{"%.3f" % (PRINT_MIN[0] - km.start_purge_prime_length / WIDTH,
km.print_min[0])|max} Y{"%.3f" % y_start} Z{
"%.4f" % HEIGHT} F{km.travel_speed_xy}
# Prime the extruder before beginning the purge lines.
G92 E0.0
# Move slowly during priming to prevent excessive blobbing
G1 X{"%.3f" % PRINT_MIN[0]} E{"%.3f" % km.start_purge_prime_length
} F{km.load_priming_speed}
G92 E0.0
# Purge.
{% for n in range(purge_rows - 1) %}
{% set x_pos = PRINT_MIN[0] if n % 2 else PRINT_MAX[0] %}
DRAW_LINE_TO HEIGHT="{HEIGHT}" WIDTH="{WIDTH}" X="{x_pos}" Y="{
WIDTH * n + y_start}"
DRAW_LINE_TO HEIGHT="{HEIGHT}" WIDTH="{WIDTH}" X="{x_pos}" Y="{
WIDTH * (n + 1) + y_start}"
{% endfor %}
{% set x_pos = PRINT_MAX[0] if purge_rows % 2 else PRINT_MIN[0] %}
DRAW_LINE_TO HEIGHT="{HEIGHT}" WIDTH="{WIDTH}" X="{x_pos}" Y="{
WIDTH * (purge_rows - 1) + y_start}"
G92 E0.0

86
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/fans.cfg Normal file
View File

@@ -0,0 +1,86 @@
# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
[gcode_macro _check_fan_params]
gcode:
{% set MAXIMUM = params.MAXIMUM|default(
printer["gcode_macro set_fan_scaling"].maximum)|int %}
{% set MINIMUM = params.MINIMUM|default(
printer["gcode_macro set_fan_scaling"].minimum)|int %}
{% if params.SCALE and params.SCALE|float <= 0 %}
{ action_raise_error("SCALE must be a positive value.") }
{% elif MINIMUM < 0 or MINIMUM > 255 %}
{ action_raise_error("MINIMUM must be between 0 and 255.") }
{% elif MAXIMUM < 0 or MAXIMUM > 255 %}
{ action_raise_error("MAXIMUM must be between 0 and 255.") }
{% elif params.SPEED and (params.SPEED|int < 0 or params.SPEED|int > 255) %}
{ action_raise_error("SPEED must be between 0 and 255.") }
{% elif params.BOOST and (params.BOOST|int < 0 or params.BOOST|int > 255) %}
{ action_raise_error("BOOST must be between 0 and 255.") }
{% elif MINIMUM > MAXIMUM %}
{ action_raise_error("MINIMUM must be less than or equal to MAXIMUM.") }
{% endif %}
# Sets optional scaling factor, minimum, and maximum applied to M106 commmand.
# If a MINIMUM greater than 0 is specified the fan will not stop unless an
# M107 command is issued. SET_FAN_SCALING always displays the current paramaters
# if scaling is active. SET_FAN_SCALING without any arguments will display the
# current scaling parameters without changing them.
[gcode_macro set_fan_scaling]
description: Sets fan scaling factors applied to M106 command. If a speed is
provided it will be adjusted according to the scaling parameters.
Usage: SET_FAN_SCALING [SCALE=<scale>] [BOOST=<boost>] [MAXIMUM=<max>]
[MINIMUM=<min>] [SPEED=<speed>]
variable_scale: 1.0
variable_boost: 0
variable_minimum: 0
variable_maximum: 255
variable_real_speed: 0
gcode:
_CHECK_FAN_PARAMS{% for k in params %}{' '~k~'='~params[k]}{% endfor %}
{% set SCALE = params.SCALE|default(scale)|float %}
{% set BOOST = params.BOOST|default(boost)|float %}
{% set MAXIMUM = params.MAXIMUM|default(maximum)|int %}
{% set MINIMUM = params.MINIMUM|default(minimum)|int %}
{% set SPEED = params.SPEED|default(real_speed)|int %}
{% if SCALE != 1.0 or BOOST != 0 or MAXIMUM != 255 or MINIMUM != 0 %}
{action_respond_info("Fan: Scale: %.2f Minimum:%i Maximum: %i Speed: %i"|
format(SCALE, MINIMUM, MAXIMUM, SPEED))}
{% endif %}
# Update parameters on change.
{% if params|length > 0 %}
SET_GCODE_VARIABLE MACRO=set_fan_scaling VARIABLE=scale VALUE="{SCALE}"
SET_GCODE_VARIABLE MACRO=set_fan_scaling VARIABLE=boost VALUE="{BOOST}"
SET_GCODE_VARIABLE MACRO=set_fan_scaling VARIABLE=minimum VALUE="{MINIMUM}"
SET_GCODE_VARIABLE MACRO=set_fan_scaling VARIABLE=maximum VALUE="{MAXIMUM}"
# Run fan at adusted speed
M106 S{SPEED}
{% endif %}
# Dummy argument block for Mainsail
{% set dummy = None if True else "
{% set dummy = params.SCALE|default(1.0)|float %}
{% set dummy = params.BUMP|default(0)|int %}
{% set dummy = params.MAXIMUM|default(255)|int %}
{% set dummy = params.MINIMUM|default(0)|int %}
{% set dummy = params.SPEED|default(current speed)|int %}
" %} # End argument block for Mainsail
[gcode_macro reset_fan_scaling]
description: Clears all fan scaling factors.
Usage: RESET_FAN_SCALING
gcode:
SET_FAN_SCALING SCALE=1.0 BOOST=0 MAXIMUM=255 MINIMUM=0
[gcode_macro m106]
description: Wraps M106 to implement scaling overrides.
rename_existing: M106.6245197
gcode:
{% set S = params.S|default(255)|int %}
{% set scale = printer["gcode_macro set_fan_scaling"] %}
SET_GCODE_VARIABLE MACRO=set_fan_scaling VARIABLE=real_speed VALUE="{S}"
M106.6245197 S{((((S + scale.boost) * scale.scale) | round | int,
scale.minimum) | max, scale.maximum) | min}

167
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/filament.cfg Normal file
View File

@@ -0,0 +1,167 @@
# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
[gcode_macro _load_unload]
gcode:
{% set saved_extruder = printer.toolhead.extruder %}
{% set EXTRUDER = params.EXTRUDER|default(saved_extruder)|lower %}
{% set km = printer["gcode_macro _km_globals"] %}
# Use the global min as default if provided, else use per extruder min + 5.
{% set default_minimum = km.load_min_temp if km.load_min_temp else
(printer.configfile.settings[EXTRUDER].min_extrude_temp + 5) %}
{% if 'MINIMUM' in params %}
{% set MINIMUM = params.MINIMUM|int %}
# This is the special case for a filament change after an idle timeout.
{% elif printer.pause_resume.is_paused and printer[EXTRUDER].target == 0 and
printer["gcode_macro resume"].saved_extruder_temp %}
{% set MINIMUM = printer["gcode_macro resume"].saved_extruder_temp %}
# Use the target temp if higher than the default.
{% elif printer[EXTRUDER].target > default_minimum %}
{% set MINIMUM = printer[EXTRUDER].target %}
{% else %}
{% set MINIMUM = default_minimum %}
{% endif %}
{% if MINIMUM < printer.configfile.settings[EXTRUDER].min_extrude_temp %}
{ action_raise_error("Extrude below minimum temp.") }
{% elif printer.pause_resume.is_paused %}
# Clear the saved E if we're (un-)loading while paused.
SET_GCODE_VARIABLE MACRO=resume VARIABLE=saved_e VALUE="{0.0}"
{% endif %}
{% set SPEED = params.SPEED|default(km.load_speed)|int %}
{% set priming_length = km.load_priming_length %}
{% set LENGTH = params.LENGTH|default(km.load_length)|float - priming_length%}
{% if LENGTH < 0 %}
{% set priming_length = (priming_length + LENGTH, 0)|max %}
{% set LENGTH = 0 %}
{% endif %}
SAVE_GCODE_STATE NAME=_KM_LOAD_UNLOAD
{% if EXTRUDER != saved_extruder%}
ACTIVATE_EXTRUDER EXTRUDER={EXTRUDER}
{% endif %}
_KM_PRINT_STATUS ACTION=PUSH_STATUS
{% if not printer.extruder.can_extrude or
printer[EXTRUDER].target < default_minimum %}
{action_respond_info("Preheating %s to %d" | format(EXTRUDER, MINIMUM))}
M109 S{MINIMUM}
{% endif %}
_KM_PRINT_STATUS ACTION=CHANGE STATUS={"filament_load"
if params.LOAD|int else "filament_unload"}
M83
{% set priming_speed = (km.load_priming_speed, SPEED)|min %}
{% if params.LOAD|int %}
G0 E{LENGTH} F{SPEED}
G0 E{priming_length} F{priming_speed}
G0 E{'%.4f' % -printer["gcode_macro resume"].saved_e} F{km.load_speed}
{% else %}
{% set pre_prime_distance = 5.0 %}
{% set shaping_moves = 5 %}
{% set shaping_distance = (shaping_moves * (1 + shaping_moves)/20) %}
# Push forward to heat up, then retract to the edge of the meltzone.
G0 E{pre_prime_distance} F{SPEED}
G4 P500
G0 E{'%.4f' % -(priming_length - shaping_distance)} F{SPEED}
# Shape the tip with a pairs of short extrusions and retractions, where
# the retractions get increasingly longer than the extrusion.
{% for i in range(1, shaping_moves + 1) %}
G0 E2 F{priming_speed}
G0 E-{2 + (0.1 * i)} F{priming_speed}
{% endfor %}
# Retract the rest of the length.
G0 E{'%.4f' % -(LENGTH + pre_prime_distance)} F{SPEED}
{% endif %}
RESTORE_GCODE_STATE NAME=_KM_LOAD_UNLOAD
# Beep on completion
_KM_BEEP_IF_AVAILABLE BEEPS={params.BEEPS|default(8)}
_KM_PRINT_STATUS ACTION=CHANGE STATUS=pop_status
# TODO: Fix casing after front-ends get fixed
[gcode_macro LOAD_FILAMENT]
description: Loads filament to the extruder.
Usage: LOAD_FILAMENT [LENGTH=<distance>] [SPEED=<speed>]
[EXTRUDER=<extruder>] [MINIMUM=<temperature>]
[BEEPS=<beep count on completion>]
gcode:
_LOAD_UNLOAD LOAD=1{% for k in params
%}{' '~k~'="'~params[k]~'"'}{% endfor %}
# Dummy argument block for Mainsail
{% set dummy = None if True else "
M109
{% set dummy = params.LENGTH|default(variable_load_length)|float %}
{% set dummy = params.SPEED|default(variable_load_speed)|float %}
{% set dummy = params.EXTRUDER|default(current extruder) %}
{% set dummy = params.MINIMUM|default(min_extrude_temp)|int %}
{% set dummy = params.BEEPS|default(10)|int %}
" %} # End argument block for Mainsail
# TODO: Fix casing after front-ends get fixed
[gcode_macro UNLOAD_FILAMENT]
description: Unloads filament from the extruder.
Usage: UNLOAD_FILAMENT [LENGTH=<distance>] [SPEED=<speed>]
[EXTRUDER=<extruder>] [MINIMUM=<temperature>]
[BEEPS=<beep count on completion>]
gcode:
_LOAD_UNLOAD LOAD=0{% for k in params
%}{' '~k~'="'~params[k]~'"'}{% endfor %}
# Dummy argument block for Mainsail
{% set dummy = None if True else "
M109
{% set dummy = params.LENGTH|default(variable_load_length)|float %}
{% set dummy = params.SPEED|default(variable_load_speed)|float %}
{% set dummy = params.EXTRUDER|default(default extruder) %}
{% set dummy = params.MINIMUM|default(min_extrude_temp)|int %}
{% set dummy = params.BEEPS|default(10)|int %}
" %} # End argument block for Mainsail
[gcode_macro _pause_inner_m700]
gcode:
{% set extruder = "extruder" ~ params.T|replace('0', '')
if "T" in params else printer.toolhead.extruder %}
{% if extruder != printer.toolhead.extruder%}
ACTIVATE_EXTRUDER EXTRUDER={extruder}
{% endif %}
{% set z_param = (' Z="%f"' % params.Z) if 'Z' in params else "" %}
{% if printer.idle_timeout.state|string == "Printing" %}
PAUSE B="{0}" P=2{z_param}
{% elif not printer.pause_resume.is_paused%}
PARK B="{0}" P=2{z_param}
{% endif %}
[gcode_macro m701]
description: Pauses/parks the toolhead then loads filament to the extruder.
Usage: M701 [L<distance>] [Z<pos>] [T<extruder>]
gcode:
{% if 'U' in params %}
{% if not 'L' in params %}
RESPOND TYPE=error MSG="Argument \"U\" substituted for missing \"L\"."
{% set dummy = params.__setitem__("L", params.U) %}
{% else %}
RESPOND TYPE=error MSG="Invalid argument \"U\" ignored."
{% endif %}
{% endif %}
_PAUSE_INNER_M700 {% for k in params %}{' '~k~'="'~params[k]~'"'}{% endfor %}
LOAD_FILAMENT BEEPS="{10}" LENGTH={
params.L|default(printer["gcode_macro _km_globals"].load_length)|float}
[gcode_macro m702]
description: Pauses/parks the toolhead then unloads filament from the extruder.
Usage: M702 [U<distance>] [Z<pos>] [T<extruder>]
gcode:
{% if 'L' in params %}
{% if not 'U' in params %}
RESPOND TYPE=error MSG="Argument \"L\" substituted for missing \"U\"."
{% set dummy = params.__setitem__("U", params.L) %}
{% else %}
RESPOND TYPE=error MSG="Invalid argument \"L\" ignored."
{% endif %}
{% endif %}
_PAUSE_INNER_M700 {% for k in params %}{' '~k~'="'~params[k]~'"'}{% endfor %}
UNLOAD_FILAMENT BEEPS="{10}" LENGTH={
params.U|default(printer["gcode_macro _km_globals"].load_length)|float}

466
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/globals.cfg Normal file
View File

@@ -0,0 +1,466 @@
# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
################################################################################
#
# Declare any of the below variables in your own [gcode_macro _km_options] to
# to override the values here.
#
# DO NOT CHANGE ANYTHING IN THIS FILE!!!
#
# This file handles the initialization for all the macros, and difficult to
# diagnose errors will result from unexpected values or code changes.
#
################################################################################
[gcode_macro _km_globals]
# Available bed surfaces for offset adjustments.
variable_bed_surface_max_name_length: 10
# Available bed surfaces for offset adjustments.
variable_bed_surfaces: ['default']
# Total length (in mm) of filament to load (bowden tubes will be much longer).
variable_load_length: 90.0
# Global minimum extruder temp for loading (default: min_extrude_temp + 5).
variable_load_min_temp: 0
# Length (in mm) of the extruder meltzone (feeds at priming speed).
variable_load_priming_length: 20.0
# Filament priming speed (in mm/m).
variable_load_priming_speed: 200
# Filament loading speed (in mm/m).
variable_load_speed: 1200
# Set to False to hide the Octoprint LCD menus.
variable_menu_show_octoprint: True
# Set to False to hide the SD Card LCD menus.
variable_menu_show_sdcard: True
# List up to 10 pre-heat settings in order for the LCD "Temperature" menu
variable_menu_temperature: [
{'name' : 'PLA', 'extruder' : 200, 'bed' : 60},
{'name' : 'PETG', 'extruder' : 230, 'bed' : 85},
{'name' : 'ABS', 'extruder' : 245, 'bed' : 110}]
# X position to park toolhead (set "max" or "min" to infer from stepper config).
variable_park_x: 0.0
# Y position to park toolhead (set "max" or "min" to infer from stepper config).
variable_park_y: 0.0
# Z position to park toolhead (set "max" or "min" to infer from stepper config).
variable_park_z: 20.0
# Minimum printable XY coordinate. Defaults to X and Y position_min.
variable_print_min: () # example: (0, 0)
# Maximum printable XY coordinate. Defaults to X and Y position_max.
variable_print_max: () # example: (220, 220)
# Scaling factor for M900 command (negative values make M900 a no-op).
variable_pressure_advance_scale: -1.0
# Additional padding around the specified print area for a bed mesh.
variable_probe_mesh_padding : 5.0
# Minimum number of probes per axis for partial probing of a bed mesh.
variable_probe_min_count: 3
# Scaling factor to increase probe count for partial bed probes.
variable_probe_count_scale: 1.0
# Additional delay (in ms) during bed heating, to allow the bed to stabilize.
variable_start_bed_heat_delay: 2000
# Amount (in degrees C) to overshoot bed target temp before stabilizing.
variable_start_bed_heat_overshoot: 2.0
# Set to clear adjustments (e.g. feedrate, extrusion, heater) at end of print.
variable_start_clear_adjustments_at_end: True
# PRINT_END Y park position (set "max" or "min" to infer from stepper config).
variable_start_end_park_y: 0.0 # Defaults to print_max Y.
# Extruder scale factor during pre-warmup in PRINT_START.
variable_start_extruder_preheat_scale: 0.5
# If non-zero the extruder will stabilize at this temp before probing the bed.
variable_start_extruder_probing_temp: 0
# Set to rehome Z in PRINT_START after bed temp stabilizes; False to disable.
variable_start_home_z_at_temp: True
# Set to level bed in PRINT_START after bed temp stabilizes; False to disable.
variable_start_level_bed_at_temp: True
# Distance (in millimeters) between the purge lines and the print area.
variable_start_purge_clearance: 2.0
# Length of filament (in millimeters) to purge at print start.
variable_start_purge_length: 0.0 # 30 is a good starting point.
# Length of filament (in millimeters) to prime before drawing purge lines.
variable_start_purge_prime_length: 12.0
# Level gantry in PRINT_START after bed temp stabilizes; False to disable.
variable_start_quad_gantry_level_at_temp: True
# Maximum distance to relocate print in random XY location to reduce bed wear.
variable_start_random_placement_max: 0
# The relocation will be at least this far from the printable edge of the bed.
variable_start_random_placement_padding: 10.0
# Skip level and load saved mesh for current sheet (if found); False to disable.
variable_start_try_saved_surface_mesh: False
# Adjust Z tilt in PRINT_START after bed temp stabilizes; False to disable.
variable_start_z_tilt_adjust_at_temp: True
# X and Y travel speed (in mm/m) for movement macros.
variable_travel_speed_xy: 3000
# Z travel speed in (mm/m) for movement macros.
variable_travel_speed_z: 600
################################################################################
description: Initializes our globals, including any _km_options overrides.
gcode:
# Doing a shutdown here is a bit aggressive, but if we're missing required
# sections then a lot of things could go very bad later.
# To minimize the annoyance we try to identify all the fatal errors at once.
# format is:
# key = required config section
# value[0] = required field in section
# value[1] = required string in field
# A "None" value means there's no required field
{% set required_sections = {"heater_bed" : None,
"extruder" : None,
"gcode_macro _km_options" : None,
"idle_timeout" : ("gcode", "_KM_IDLE_TIMEOUT"),
"pause_resume" : None,
"respond" : None,
"save_variables" : None,
"virtual_sdcard" :
("on_error_gcode", "CANCEL_PRINT")
} %}
{% set warn_removed = {
"start_extruder_set_target_before_level" :
"The start_extruder_set_target_before_level option has been removed. "
"Use the start_extruder_probing_temp option instead to set a fixed "
"probing temperature.",
"start_gcode_before_print" :
"The start_gcode_before_print option has been removed. The same effect "
"can now be achieved by inserting custom gcode before the "
"_PRINT_START_PHASE_PURGE line in your slicer's start gcode, or by "
"wrapping the _PRINT_START_PHASE_PURGE macro. See the Slicer "
"Configuration section in the readme for more information.",
"velocity_decel_scale" :
"The velocity_decel_scale option has been removed. Klipper's input "
"shaping provides a superior mechanism for improving print quality "
"at higher speeds.",
} %}
{% set output = [] %}
{% for s in required_sections %}
{% set f = required_sections[s][0] if required_sections[s] else None %}
{% set v = required_sections[s][1] if required_sections[s] else None %}
{% if s not in printer.configfile.config %}
{% set dummy = output.append("Missing [%s] section.\n" | format(s)) %}
{% elif f and
(v not in printer.configfile.config[s][f]|default("")|upper) %}
{% set dummy = output.append("Missing %s in %s for [%s] section.\n"
| format(v, f, s)) %}
{% endif %}
{% endfor %}
{% if output %}
{ action_emergency_stop((
"required printer.cfg section(s) missing:\n"
~ output | join("\n")) ~
"See readme: https://github.com/jschuh/klipper-macros\x23klipper-setup")
}
{% endif %}
# These are all set to their defaults based on config options:
SET_GCODE_VARIABLE MACRO=_km_globals VARIABLE=start_level_bed_at_temp VALUE="{
1 if printer.bed_mesh is defined else 0}"
SET_GCODE_VARIABLE MACRO=_km_globals VARIABLE=start_quad_gantry_level_at_temp VALUE="{
1 if printer.quad_gantry_level is defined else 0}"
SET_GCODE_VARIABLE MACRO=_km_globals VARIABLE=start_z_tilt_adjust_at_temp VALUE="{
1 if printer.z_tilt is defined else 0}"
{% set toolhead = printer.toolhead %}
SET_GCODE_VARIABLE MACRO=_km_globals VARIABLE=print_min VALUE="{
(toolhead.axis_minimum.x, toolhead.axis_minimum.y)}"
SET_GCODE_VARIABLE MACRO=_km_globals VARIABLE=print_max VALUE="{
(toolhead.axis_maximum.x, toolhead.axis_maximum.y)}"
SET_GCODE_VARIABLE MACRO=_km_globals VARIABLE=start_end_park_y VALUE="{
toolhead.axis_maximum.y}"
{% set settings = printer.configfile.settings %}
SET_GCODE_VARIABLE MACRO=_km_globals VARIABLE=start_home_z_at_temp VALUE="{
1 if ("stepper_z" in settings and
settings.stepper_z.endstop_pin.split()|join("")|lower ==
"probe:z_virtual_endstop") else 0}"
{% set options = printer["gcode_macro _km_options"] %}
{% set km = printer["gcode_macro _km_globals"] %}
# Allow placeholders for parking positions.
{% if options.park_x|default("")|string|lower == "min" %}
{% set dummy = options.__setitem__("park_x",
printer.configfile.settings.stepper_x.position_min) %}
{% elif options.park_x|default("")|string|lower == "max" %}
{% set dummy = options.__setitem__("park_x",
printer.configfile.settings.stepper_x.position_max) %}
{% endif %}
{% if options.park_y|default("")|string|lower == "min" %}
{% set dummy = options.__setitem__("park_y",
printer.configfile.settings.stepper_y.position_min) %}
{% elif options.park_y|default("")|string|lower == "max" %}
{% set dummy = options.__setitem__("park_y",
printer.configfile.settings.stepper_y.position_max) %}
{% endif %}
{% if options.start_end_park_y|default("")|string|lower == "min" %}
{% set dummy = options.__setitem__("start_end_park_y",
printer.configfile.settings.stepper_y.position_min) %}
{% elif options.start_end_park_y|default("")|string|lower == "max" %}
{% set dummy = options.__setitem__("start_end_park_y",
printer.configfile.settings.stepper_y.position_max) %}
{% endif %}
{% if options.park_z|default("")|string|lower == "min" %}
{% set dummy = options.__setitem__("park_z",
printer.configfile.settings.stepper_z.position_min) %}
{% elif options.park_z|default("")|string|lower == "max" %}
{% set dummy = options.__setitem__("park_z",
printer.configfile.settings.stepper_z.position_max) %}
{% endif %}
# Force overrides to use the original types in _KM_GLOBALS.
{% for k in options %}
{% if k not in km %}
{% if k in warn_removed %}
{action_respond_info(warn_removed[k])}
{% else %}
{% set dummy = output.append("%s is not valid for _KM_OPTIONS." |
format(k)) %}
{% endif %}
{% elif km[k] is string %}
SET_GCODE_VARIABLE MACRO=_km_globals VARIABLE={k
} VALUE="'{options[k]|replace('\\','\\\\')|replace('\'','\\\'')
|replace('\"','\\\"')}'"
{% elif km[k] is float %}
SET_GCODE_VARIABLE MACRO=_km_globals VARIABLE={k
} VALUE="{options[k]|float}"
{% elif km[k] is integer or km[k] is boolean %}
SET_GCODE_VARIABLE MACRO=_km_globals VARIABLE={k} VALUE="{options[k]|int}"
{% elif km[k] is mapping %}
{% if options[k] is not mapping %}
{% set dummy = output.append("%s requires a mapping type." |
format(k)) %}
{% endif %}
SET_GCODE_VARIABLE MACRO=_km_globals VARIABLE={k
} VALUE="{options[k]|replace('\"','\\\"')}"
{% elif km[k] is sequence %}
{% if options[k] is not sequence %}
{% set dummy = output.append("%s requires a sequence type." |
format(k)) %}
{% endif %}
SET_GCODE_VARIABLE MACRO=_km_globals VARIABLE={k
} VALUE="{options[k]|replace('\"','\\\"')}"
{% else %}
{% set dummy = output.append("%s is not a valid type for _KM_OPTIONS." |
format(k)) %}
{% endif %}
{% endfor %}
{% if "homing_override" in printer.configfile.config %}
{% for l in printer.configfile.config.homing_override.gcode.split("\n") %}
{% if " g28 " in (" " ~ l.split("\x23")[0].split(";")[0]|lower ~ " ") %}
{% set dummy = output.append(
"G28 in [homing_override] gcode. Replace with G28.6245197 to "
"fix recursive macro call.\n"
"See readme: https://github.com/jschuh/klipper-macros\x23g28") %}
{% endif %}
{% endfor %}
{% endif %}
SET_GCODE_VARIABLE MACRO=check_km_config VARIABLE=load_errors VALUE="{
output|replace('\"','\\\"')}"
M400
[delayed_gcode INIT_GLOBALS]
# This runs once at startup and initializes all macros.
initial_duration: 1
gcode:
LIST_MACROS SILENT=1 # Build the macro cache.
_KM_GLOBALS
# This needs to be its own macro so it gets evaluated after _KM_GLOBALS runs.
CHECK_KM_CONFIG
_INIT_SURFACES
BED_MESH_CHECK
# Sets the default drawing parameters.
SET_DRAW_PARAMS WIDTH="{printer.configfile.settings.extruder.nozzle_diameter}"
# This is any end-user gcode that need to run after macro initialization.
_KM_OPTIONS
_KM_PRINT_STATUS ACTION=CHANGE STATUS=ready
[gcode_macro check_km_config]
variable_load_errors: []
description: Checks global variables and throws an error on any invalid values.
Does nothing if the config has no errors.
gcode:
{% set km = printer["gcode_macro _km_globals"] %}
{% set toolhead = printer.toolhead %}
{% set output = load_errors %}
{% if km.park_x > toolhead.axis_maximum.x or
km.park_x < toolhead.axis_minimum.x %}
{% set dummy = output.append("park_x is invalid.") %}
{% endif %}
{% if km.park_y > toolhead.axis_maximum.y or
km.park_y < toolhead.axis_minimum.y %}
{% set dummy = output.append("park_y is invalid.") %}
{% endif %}
{% if km.park_z > toolhead.axis_maximum.z or
km.park_z < toolhead.axis_minimum.z %}
{% set dummy = output.append("park_z is invalid.") %}
{% endif %}
{% if km.print_max[0] > toolhead.axis_maximum.x or
km.print_max[1] > toolhead.axis_maximum.y %}
{% set dummy = output.append("print_max is invalid.") %}
{% endif %}
{% if km.print_min[0] < toolhead.axis_minimum.x or
km.print_min[1] < toolhead.axis_minimum.y %}
{% set dummy = output.append("print_min is invalid.") %}
{% endif %}
{% if km.start_extruder_preheat_scale > 1.0 or
km.start_extruder_preheat_scale < 0.0 %}
{% set dummy = output.append("extruder_preheat_scale is invalid.") %}
{% endif %}
{% if km.load_length >
printer.configfile.settings["extruder"].max_extrude_only_distance %}
{% set dummy = output.append(
"load_length exceeds max_extrude_only_distance.") %}
{% endif %}
{% if km.load_length < km.load_priming_length %}
{% set dummy = output.append(
"load_length is shorter than load_priming_length.") %}
{% endif %}
{% if km.load_length < 0.0 %}
{% set dummy = output.append("load_length is negative.") %}
{% endif %}
{% if km.load_priming_length < 0.0 %}
{% set dummy = output.append("load_priming_length is negative.") %}
{% endif %}
# Emit all the config errors.
{% if output %}
{ action_raise_error(output|sort|join('\nError: ')) }
{% endif %}
M400
[gcode_macro kmvars]
description: Lists global variables used by klipper-macros.
Usage: KMVARS [SEARCH=<search_string>]
gcode:
{% set SEARCH = params.SEARCH|default(params.S|default(""))|lower %}
{% set km = printer["gcode_macro _km_globals"] %}
{% set output = [] %}
{% for k in km %}
{% if SEARCH in k %}
{% set dummy = output.append(k ~ ": " ~ km[k]) %}
{% endif %}
{% endfor %}
{ action_respond_info(output|sort|join('\n')) }
[gcode_macro check_macro_docs]
description: Lists macros lacking proper documentation.
Usage: CHECK_MACRO_DOCS [USAGE=<0|1>] [HIDDEN=<1|0>] [RENAMED=<1|0>]
gcode:
{% set USAGE = params.USAGE|default(0)|int %}
{% set HIDDEN = params.HIDDEN|default(0)|int %}
{% set RENAMED = params.RENAMED|default(0)|int %}
{% set output = [] %}
{%set config = printer.configfile.config %}
{% for k in config|sort %}
{% if k.startswith("gcode_macro") %}
{% set name = k.split()[1] %}
{% set desc = config[k].description|default("") %}
{% set is_renamed = config[k].rename_existing|default("") %}
{% if (not desc or (USAGE and not "Usage: "~name.upper() in desc)) and
(HIDDEN or not name.startswith('_')) and (RENAMED or is_renamed) %}
{% set dummy = output.append("%s&nbsp;%s: missing %s."
| format("*" if is_renamed else "&nbsp;", name,
"description" if not desc else "usage")) %}
{% endif %}
{% endif %}
{% endfor %}
{action_respond_info(output|join("\n"))}
# The below macro is a lightly edited version of the one found here:
# https://klipper.discourse.group/t/example-search-printer-objects/164
[gcode_macro listvars]
description: Lists per-macro variables with a name containing SEARCH. This is
useful for debugging macros by allowing you to probe printer state. Be very
careful, however, as an overly broad SEARCH parameter can take a long time
to process and potentially hang or crash klipper.
Usage: LISTVARS SEARCH=<search_string>
gcode:
{% if 'SEARCH' not in params and 'S' not in params %}
{ action_raise_error("Must provide a SEARCH parameter.") }
{% endif %}
{% set SEARCH = params.SEARCH|default(params.S)|lower %}
{% set ns = namespace() %}
{% set output = [] %}
{% for item in printer %}
{% if item is not string %}
{% set ns.path = ['printer', "[%s]" % (item|string), ''] %}
{% elif ' ' in item %}
{% set ns.path = ['printer', "['%s']" % (item), ''] %}
{% else %}
{% set ns.path = ['printer.', item, ''] %}
{% endif %}
{% if SEARCH in ns.path|lower %}
{% set dummy = output.append(ns.path|join) %}
{% endif %}
{% if printer[item].items() %}
{% for childkey, child in printer[item].items() recursive %}
{% set ns.path = ns.path[:loop.depth|int + 1] %}
{% if childkey is not string %}
{% set null = ns.path.append("[%s]" % (childkey|string)) %}
{% elif ' ' in childkey %}
{% set null = ns.path.append("['%s']" % (childkey)) %}
{% else %}
{% set null = ns.path.append(".%s" % (childkey)) %}
{% endif %}
{% if child is mapping %}
{loop(child.items())}
{% else %}
{% if SEARCH in ns.path|lower %}
{% set dummy = output.append("%s : %s" % (ns.path|join, child)) %}
{% endif %}
{% endif %}
{% endfor %}
{% endif %}
{% endfor %}
{ action_respond_info(output|join("\n")) }
[gcode_macro list_macros]
description: Lists registered macros (and optionally show variable state).
Usage: LISTVARS SEARCH=<search_string> VARS=<0|1> SILENT=<0|1>
variable_macros: {}
gcode:
# Load the config state once and save it.
{% if not macros %}
{% set renames = {} %}
{% for k in printer.configfile.config %}
{% if k.lower().startswith("gcode_macro") and
printer.configfile.config[k].rename_existing %}
{% set name = k.split(None, 1)[1] | lower %}
{% set dummy = renames.__setitem__(name,
[printer.configfile.config[k].rename_existing|lower] +
renames[name]|default([])) %}
{% endif %}
{% endfor %}
{% for k in printer %}
{% if k.lower().startswith("gcode_macro") %}
{% set name = k.split(None, 1)[1] | lower %}
{% set dummy = macros.__setitem__(name, renames[name]|default([])) %}
{% endif %}
{% endfor %}
{% endif %}
{% if params.SILENT|default(0)|int == 0 %}
_LIST_MACROS_DISPLAY {rawparams}
{% endif %}
[gcode_macro _list_macros_display]
gcode:
{% set SEARCH = params.SEARCH | default(params.S) | default("") | lower %}
{% set VARS = params.VARS | default(params.V) | default(0) | int != 0 %}
{% set macros = printer["gcode_macro list_macros"].macros %}
{% set output = [] %}
{% for k in macros %}
{% if SEARCH in k | lower %}
{% set line = k ~ ((" (renames: %s)" % (macros[k]|join(","))) if macros[k]
else "") %}
{% set outvars = [] %}
{% if VARS %}
{% for v in printer["gcode_macro " ~ k] | sort %}
{% set dummy = outvars.append("\n* %s: %s" %
(v, printer["gcode_macro " ~ k][v]|string)) %}
{% endfor %}
{% endif %}
{% set dummy = output.append(line + outvars | join("")) %}
{% endif %}
{% endfor %}
{ action_respond_info(output | sort | join("\n")) }

245
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/heaters.cfg Normal file
View File

@@ -0,0 +1,245 @@
# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
[gcode_macro set_heater_temperature_scaled]
gcode:
{% set HEATER = params.HEATER.lower() %}
{% set TARGET = params.TARGET|default(0.0)|float %}
{% set scaled_heaters =
printer["gcode_macro set_heater_scaling"].scaled_heaters %}
{% if HEATER in scaled_heaters %}
{% set scales = scaled_heaters[HEATER] %}
{% set dummy = scales.__setitem__("real_target", TARGET) %}
{%if TARGET > 0.0 %}
{% set TARGET = (((TARGET + scales.bump) * scales.scale, scales.minimum)
| max, scales.maximum)|min %}
{% endif %}
{% endif %}
SET_HEATER_TEMPERATURE HEATER="{HEATER}" TARGET={TARGET}
[gcode_macro temperature_wait_scaled]
gcode:
{% set SENSOR = params.SENSOR.lower() %}
{% set heater = SENSOR if not SENSOR.startswith("heater_generic") else
SENSOR.split()[1] %}
{% set scaled_heaters =
printer["gcode_macro set_heater_scaling"].scaled_heaters %}
{% if heater in scaled_heaters %}
{% set scales = scaled_heaters[heater] %}
{% if "MINIMUM" in params and MINIMUM > 0.0 %}
{% set MINIMUM = (((MINIMUM + scales.bump) * scales.scale, scales.minimum)
| max, scales.maximum)|min %}
{% endif %}
{% if "MAXIMUM" in params and MAXIMUM > 0.0 %}
{% set MAXIMUM = (((MAXIMUM + scales.bump) * scales.scale, scales.minimum)
| max, scales.maximum)|min %}
{% endif %}
{% else %}
{% set settings = printer.configfile.settings[SENSOR] %}
{% set MINIMUM = params.MINIMUM|default(settings.min_temp) %}
{% set MAXIMUM = params.MAXIMUM|default(settings.max_temp) %}
{% endif %}
{% if printer[sensor].temperature < MINIMUM or
printer[sensor].temperature > MAXIMUM %}
TEMPERATURE_WAIT SENSOR="{SENSOR}" MINIMUM={MINIMUM} MAXIMUM={MAXIMUM}
{% endif %}
[gcode_macro _gcode_wait_wrapper_inner]
gcode:
# Macro variables are evaluated at instantiation, so this inner macro is what
# gets us a scaled target value.
{% set sensor = params.HEATER if params.HEATER in
printer.heaters.available_heaters
else ("heater_generic " ~ params.HEATER) %}
{% set target = printer[sensor].target %}
{% if 'R' in params and target > 0.0 %}
{% set T = params.T|default("") %}
M{params.M}.6245197 S{target} { (" T"~T) if T else "" }
{% elif printer[sensor].temperature < target %}
TEMPERATURE_WAIT SENSOR="{sensor}" MINIMUM={target}
{% endif %}
[gcode_macro _gcode_wait_wrapper]
gcode:
{% set target = params.S | default(params.R | default(0))| float %}
SET_HEATER_TEMPERATURE_SCALED HEATER="{params.HEATER}" TARGET={target}
_GCODE_WAIT_WRAPPER_INNER{%
for k in params %}{' '~k~'="'~params[k]~'"'}{% endfor %}
[gcode_macro m109]
rename_existing: M109.6245197
gcode:
{% set extruder = "extruder" ~ params.T|replace('0', '')
if "T" in params else printer.toolhead.extruder %}
_KM_PRINT_STATUS ACTION=PUSH_STATUS
_KM_PRINT_STATUS ACTION=CHANGE STATUS=extruder_heating
_GCODE_WAIT_WRAPPER HEATER={extruder}{%
for k in params %}{' '~k~'="'~params[k]~'"'}{% endfor %}
_KM_PRINT_STATUS ACTION=CHANGE STATUS=pop_status
[gcode_macro m190]
rename_existing: M190.6245197
gcode:
_KM_PRINT_STATUS ACTION=PUSH_STATUS
_KM_PRINT_STATUS ACTION=CHANGE STATUS=bed_heating
_GCODE_WAIT_WRAPPER HEATER=heater_bed {%
for k in params %}{' '~k~'="'~params[k]~'"'}{% endfor %}
_KM_PRINT_STATUS ACTION=CHANGE STATUS=pop_status
[gcode_macro m191]
description: Sets chamber temperature (with wait for heating).
Usage: M191 [S<temp>]
gcode:
# Just fake the R parameter for the chamber.
{% if "R" in params %}
{% set dummy = params.__setitem__("S", params.R) %}
{% endif %}
_KM_PRINT_STATUS ACTION=PUSH_STATUS
_KM_PRINT_STATUS ACTION=CHANGE STATUS=chamber_heating
_GCODE_WAIT_WRAPPER HEATER=chamber {%
for k in params %}{' '~k~'="'~params[k]~'"'}{% endfor %}
_KM_PRINT_STATUS ACTION=CHANGE STATUS=pop_status
[gcode_macro m104]
rename_existing: M104.6245197
gcode:
{% set extruder = "extruder" ~ params.T|replace('0', '')
if "T" in params else printer.toolhead.extruder %}
SET_HEATER_TEMPERATURE_SCALED HEATER={extruder} TARGET={params.S|default(0)}
[gcode_macro m140]
rename_existing: M140.6245197
gcode:
SET_HEATER_TEMPERATURE_SCALED HEATER=heater_bed TARGET={params.S|default(0)}
[gcode_macro m141]
description: Sets chamber temperature.
Usage: M141 [S<temp>]
gcode:
SET_HEATER_TEMPERATURE_SCALED HEATER=chamber TARGET={params.S|default(0)}
[gcode_macro _check_heater_params]
gcode:
{% set HEATER = params.HEATER|lower %}
{% set sensor = params.HEATER %}
{% if HEATER not in printer.heaters.available_heaters %}
{% set sensor = "heater_generic " ~ HEATER %}
{% if sensor not in printer.heaters.available_heaters %}
{ action_raise_error("The value '%s' is not valid for HEATER"
| format(HEATER)) }
{% endif %}
{% endif %}
{% set settings = printer.configfile.settings[sensor] %}
{% set scaled_heaters =
printer["gcode_macro set_heater_scaling"].scaled_heaters %}
{% if HEATER is in scaled_heaters %}
{% set scales = scaled_heaters[HEATER] %}
{% else %}
{% set scales = { "scale": 1.0, "bump": 0.0, "minimum": settings.min_temp,
"maximum": settings.max_temp,
"real_target": printer[sensor].target} %}
{% endif %}
{% set SCALE = params.SCALE|default(scales.scale)|float %}
{% set BUMP = params.BUMP|default(scales.bump)|float %}
{% set MINIMUM = params.MINIMUM|default(scales.minimum)|float %}
{% set MAXIMUM = params.MAXIMUM|default(scales.maximum)|float %}
{% if SCALE <= 0 %}
{ action_raise_error("SCALE must be a positive value.") }
{% elif MINIMUM < settings.min_temp or MINIMUM > settings.max_temp %}
{ action_raise_error("MINIMUM must be between %.1f and %.1f" |
format(settings.min_temp, settings.max_temp)) }
{% elif MAXIMUM < settings.min_temp or MAXIMUM > settings.max_temp %}
{ action_raise_error("MAXIMUM must be between %.1f and %.1f" |
format(settings.min_temp, settings.max_temp)) }
{% elif MINIMUM >= MAXIMUM %}
{ action_raise_error("MINIMUM must be less than MAXIMUM.") }
{% elif "TARGET" in params and (params.TARGET|float < MINIMUM or
params.TARGET|float > MAXIMUM) %}
{ action_raise_error("TARGET must be between %.1f and %.1f" |
format(settings.min_temp, settings.max_temp)) }
{% endif %}
[gcode_macro set_heater_scaling]
description: Sets scaling parameters for heater. If a new target temperature is
passed it will be adjusted to the scaling parameters.
Usage: SET_HEATER_SCALING [HEATER=<heater>] [SCALE=<scale_factor>]
[BUMP=<degrees>] [MAXIMUM=<degrees>]
[MINIMUM=<degrees>] [TARGET=<temp>]
variable_scaled_heaters: {}
gcode:
# If no heater is supplied just list out all the scaled heaters.
{% if "HEATER" is not in params %}
{% set output = [] %}
{% for h in scaled_heaters %}
{% set dummy = output.append(
"%s: Scale: %.2f Bump: %.1f Minimum:%.1f Maximum: %.1f"
| format(h, scaled_heaters[h].scale, scaled_heaters[h].bump,
scaled_heaters[h].minimum, scaled_heaters[h].maximum)) %}
{% endfor %}
{% if output %}}{action_respond_info(output|join('\n'))}{% endif %}
{% else %}
# See if we need a new scaling entry for this heater.
{% set HEATER = params.HEATER.lower() %}
{% set settings = printer.configfile.settings[HEATER] %}
{% if HEATER is not in scaled_heaters %}
{% set dummy = scaled_heaters.__setitem__(HEATER, {"scale": 1.0,
"bump": 0.0, "minimum": settings.min_temp,
"maximum": settings.max_temp,
"real_target": printer[HEATER].target}) %}
{% endif %}
_CHECK_HEATER_PARAMS{% for k in params %}{' '~k~'='~params[k]}{% endfor %}
{% set scales = scaled_heaters[HEATER] %}
{% set SCALE = params.SCALE|default(scales.scale)|float %}
{% set BUMP = params.BUMP|default(scales.bump)|float %}
{% set MAXIMUM = params.MAXIMUM|default(scales.maximum)|float %}
{% set MINIMUM = params.MINIMUM|default(scales.minimum)|float %}
{% set TARGET = params.TARGET|default(scales.real_target)|float %}
{% set dummy = scales.__setitem__("scale", SCALE) %}
{% set dummy = scales.__setitem__("bump", BUMP) %}
{% set dummy = scales.__setitem__("maximum", MAXIMUM) %}
{% set dummy = scales.__setitem__("minimum", MINIMUM) %}
{% set dummy = scales.__setitem__("real_target", TARGET) %}
{% set settings = printer.configfile.settings[HEATER] %}
{% if SCALE != 1.0 or BUMP != 0.0 or MINIMUM != settings.min_temp or
MAXIMUM != settings.max_temp %}
{% set dummy = scaled_heaters.__setitem__(HEATER, scales) %}
{% else %} # Remove a redundant scaling entry.
{% set dummy = scaled_heaters.__delitem__(HEATER) %}
{% endif %}
SET_HEATER_TEMPERATURE_SCALED HEATER={HEATER} TARGET={TARGET}
{action_respond_info(
"%s: Scale: %.2f Bump: %.1f Minimum:%.1f Maximum: %.1f Target: %.1f"
| format(HEATER, SCALE, BUMP, MINIMUM, MAXIMUM, TARGET))}
{% endif %}
# Dummy argument block for Mainsail
{% set dummy = None if True else "
{% set dummy = params.HEATER|default(e.g. extruder) %}
{% set dummy = params.SCALE|default(1.0)|float %}
{% set dummy = params.BUMP|default(0.0)|float %}
{% set dummy = params.MAXIMUM|default(max_temp)|float %}
{% set dummy = params.MINIMUM|default(min_temp)|float %}
{% set dummy = params.TARGET|default(current target)|float %}
" %} # End argument block for Mainsail
[gcode_macro reset_heater_scaling]
description: Clears scaling for heater (or all heaters if none specified).
Usage: RESET_HEATER_SCALING [HEATER=<heater>]
gcode:
{% if "HEATER" in params %}
{% set HEATER = params.HEATER.lower() %}
{% if HEATER not in printer.heaters.available_heaters %}
{ action_raise_error("The value '%s' is not valid for HEATER"
| format(HEATER)) }
{% endif %}
{% set settings = printer.configfile.settings[HEATER] %}
SET_HEATER_SCALING HEATER={HEATER
} SCALE=1.0 BUMP=0.0 MINIMUM={settings.min_temp
} MAXIMUM={settings.max_temp}
{% else %}
# Clear everything if no heater was provided.
SET_GCODE_VARIABLE MACRO=set_heater_scaling VARIABLE=scaled_heaters VALUE={
"{}"}
{% endif %}

17
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/idle.cfg Normal file
View File

@@ -0,0 +1,17 @@
# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
[gcode_macro _km_idle_timeout]
gcode:
{% if printer.pause_resume.is_paused %}
{action_respond_info("Extruder powered down on idle timeout.")}
SET_GCODE_VARIABLE MACRO=resume VARIABLE=saved_extruder_temp VALUE="{
printer[printer.toolhead.extruder].target}"
M104; Turn off extruder but leave the bed on.
{% else %}
TURN_OFF_HEATERS
M107; turn off fan
M84
_KM_PRINT_STATUS ACTION=CHANGE STATUS=ready
{% endif %}

67
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/kinematics.cfg Normal file
View File

@@ -0,0 +1,67 @@
# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
[gcode_macro _check_kinematic_limits]
gcode:
{% set toolhead = printer.toolhead %}
{% if params.X and (params.X|float < toolhead.axis_minimum.x or
params.X|float > toolhead.axis_maximum.x) %}
{action_raise_error("X[%.3f] must be between %.3f and %.3f."
| format(params.X|float, toolhead.axis_minimum.x,
toolhead.axis_maximum.x))}
{% elif params.Y and (params.Y|float < toolhead.axis_minimum.y or
params.Y|float > toolhead.axis_maximum.y) %}
{action_raise_error("Y[%.3f] must be between %.3f and %.3f."
| format(params.Y|float, toolhead.axis_minimum.y,
toolhead.axis_maximum.y))}
{% elif params.Z and (params.Z|float < toolhead.axis_minimum.z or
params.Z|float > toolhead.axis_maximum.z) %}
{action_raise_error("Z[%.3f] must be between %.3f and %.3f."
| format(params.Z|float, toolhead.axis_minimum.z,
toolhead.axis_maximum.z))}
{% elif params.E and (params.E|float|abs > printer.configfile.settings[
"extruder"].max_extrude_only_distance) %}
{action_raise_error("E[%.4f] exceeds max_extrude_only_distance[%.4f]."
| format(params.E|float|abs, printer.configfile.settings[
"extruder"].max_extrude_only_distance))}
{% endif %}
[gcode_macro lazy_home]
description: Homes the specified axes. If lazy is true, already homed axes
are skipped.
Usage: LAZY_HOME [LAZY=<1|0>] [AXES=<axes_string>]
gcode:
# This is split apart so we can force the macro rename cache to be ready.
LIST_MACROS SILENT=1
_LAZY_HOME_INNER {rawparams}
[gcode_macro _lazy_home_inner]
gcode:
# Find the real g28 command.
{% set G28 = (printer["gcode_macro list_macros"].macros.g28|
default(["g28"],True))[-1] %}
{% set axes = 'XYZ'|select('in', params.AXES|default("XYZ")|upper|list) %}
{% if not axes %} # No axes means home everything.
{% set axes = 'XYZ' %}
{% endif %}
{% if params.LAZY|default(1)|int %} # Prune out the already homed axes.
{% set axes = axes|reject('in', printer.toolhead.homed_axes|upper)|join() %}
{% endif %}
{% if axes %}
_KM_PRINT_STATUS ACTION=PUSH_STATUS
_KM_PRINT_STATUS ACTION=CHANGE STATUS=homing
{G28}{% for k in axes %}{' ' ~ k}{% endfor %}
_KM_PRINT_STATUS ACTION=CHANGE STATUS=pop_status
{% endif %}
[gcode_macro g28]
description: Wraps the G28 command to add the Marlin "O" parameter so that
already homed axes will not be homed again. See the Klipper documentation on
G28 for the behavior of the other parameters.
Usage: G28 [O] ...
rename_existing: G28.6245197
gcode:
{% set axes = 'XYZ'|select('in', params)|join() %}
LAZY_HOME LAZY={('O' in params)|int}{%if axes%} AXES={axes}{%endif%}

411
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/layers.cfg Normal file
View File

@@ -0,0 +1,411 @@
# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
[gcode_macro before_layer_change]
description: Add this to the "before layer change" input box in the slicer.
Usage: BEFORE_LAYER_CHANGE HEIGHT=<current_height> LAYER=<current_layer>
gcode:
{% set height = params.HEIGHT|default(printer.toolhead.position.z)|float %}
{% set layer = params.LAYER|default(-1)|int + 1 %}
{% if height >= 0.0 and layer >= 0 %}
SET_PRINT_STATS_INFO CURRENT_LAYER="{layer}"
SET_GCODE_VARIABLE MACRO=_km_layer_run VARIABLE=cur_height VALUE="{height}"
{% if printer["gcode_macro _km_layer_run"].clearance_z < height %}
SET_GCODE_VARIABLE MACRO=_km_layer_run VARIABLE=clearance_z VALUE="{
height}"
{% endif %}
{% endif %}
[gcode_macro after_layer_change]
description: Add this to the "after layer change" input box in the slicer.
Usage: AFTER_LAYER_CHANGE
gcode:
_KM_LAYER_RUN
[gcode_macro gcode_at_layer]
description: Schedules the specified g-code command to be run at the specified
layer. LAYER=next will cause the command to run at the next layer change.
Usage: GCODE_AT_LAYER { HEIGHT=<pos> | LAYER=<layer> } COMMAND=<gcode>
[CANCEL=<0|1>]
gcode:
{% set tot_layers = printer.print_stats.info.total_layer %}
{% if params|length > 0 %}
_KM_CHECK_IS_PRINTING
{% set CANCEL = params.CANCEL|default(0)|int != 0 %}
{% set COMMAND = params.COMMAND|default(None) %}
{% if COMMAND %} # This makes it easier to match commands for cancellation.
{% set COMMAND = COMMAND.lstrip().split(None, 1) %}
{% set COMMAND = " ".join([COMMAND[0]|upper] + COMMAND[1:]) %}
{% endif %}
{% if "LAYER" in params %}
{% set cmd_container = "commands_layer" %}
{% set cur_layer = printer.print_stats.info.current_layer|int %}
{% if "HEIGHT" in params %}
{action_raise_error("Conflicting HEIGHT and LAYER arguments provided.")}
{% elif params.LAYER|string|lower == "next" %}
{% set LAYER = cur_layer + 1 %}
{% else %}
{% set LAYER = params.LAYER|int %}
{% endif %}
{% if LAYER <= cur_layer %}
{action_raise_error("LAYER[%i] must be above current print layer[%i]."
| format(LAYER, cur_layer))}
{% elif tot_layers and LAYER > tot_layers %}
{action_raise_error("LAYER[%i] must not be above top layer[%i]."
| format(LAYER, tot_layers))}
{% endif %}
{% set key = LAYER %}
{% elif "HEIGHT" in params %}
{% set cmd_container = "commands_height" %}
{% set HEIGHT = params.HEIGHT|float %}
{% set cur_height = printer["gcode_macro _km_layer_run"].cur_height %}
{% if HEIGHT <= cur_height %}
{action_raise_error(
"HEIGHT[%.3f] must be above current print height[%.3f].")
| format(HEIGHT, cur_height)}
{% elif HEIGHT >= printer.toolhead.axis_maximum.z %}
{action_raise_error(
"HEIGHT[%.3f] must be below maximum Z height[%.3f].")
| format(HEIGHT, printer.toolhead.axis_maximum.z)}
{% endif %}
{% set key = HEIGHT %}
{% else %}
{action_raise_error("No HEIGHT or LAYER argument provided.")}
{% endif %}
{% set commands = printer["gcode_macro _km_layer_run"][cmd_container] %}
{% if key not in commands and not CANCEL %}
{% set dummy = commands.__setitem__(key, []) %}
{% endif %}
{% if CANCEL %}
{% if key in commands %}
{% set pos = ("%i"|format(key)) if key is integer else
("%.3fmm"|format(key)) %}
{% if COMMAND %}
{% set dummy = commands[key].remove(COMMAND) %}
{% if commands[key]|length == 0 %}
{% set dummy = commands.__delitem__(key) %}
{% endif %}
{action_respond_info("Cancelled %s %s:\n* %s" |
format("layer" if k is integer else "height",
pos, COMMAND))}
{% else %}
{% set dummy = commands.__delitem__(key) %}
{action_respond_info("Cancelled all commands at %s %s." |
format("layer" if k is integer else "height",
pos))}
{% endif %}
{% endif %}
{% elif not COMMAND %}
{action_raise_error("No COMMAND argument provided.")}
{% elif COMMAND in commands[key] %}
{action_raise_error("Duplicate command previously scheduled.")}
{% else %}
{% set dummy = commands[key].append(COMMAND) %}
{% set pos = ("%i"|format(key)) if key is integer else
("%.3fmm"|format(key)) %}
{action_respond_info("%s %s:\n* %s" |
format("layer" if key is integer else "height",
pos, COMMAND))}
{% endif %}
SET_GCODE_VARIABLE MACRO=_km_layer_run VARIABLE={cmd_container} VALUE="{
commands|replace('\"','\\\"')}"
_UPDATE_LAYER_COMPAT
# No arguments means just list all the triggers.
{% else %}
{% set output = [] %}
{% set commands = printer["gcode_macro _km_layer_run"].commands_layer %}
{% for key in commands|list|sort %}
{% set dummy = output.append("layer %i:" | format(key)) %}
{% for c in commands[key] %}
{% set dummy = output.append("* %s" | format(c)) %}
{% endfor %}
{% endfor %}
{% set commands = printer["gcode_macro _km_layer_run"].commands_height %}
{% for key in commands|list|sort %}
{% set dummy = output.append("height %.3fmm:" | format(key)) %}
{% for c in commands[key] %}
{% set dummy = output.append("* %s" | format(c)) %}
{% endfor %}
{% endfor %}
{action_respond_info(output|join('\n'))}
{% endif %}
[gcode_macro _km_layer_run]
description: Runs pending commands for the current layer change.
Usage: _KM_LAYER_RUN
variable_cur_height: 0.0
variable_clearance_z: 0.0
variable_commands_layer: {}
variable_commands_height: {}
gcode:
{% set cur_layer = printer.print_stats.info.current_layer %}
{% for key in commands_layer | select("<=", cur_layer) | sort %}
{action_respond_info("Executing scheduled commands at layer %d:\n%s" |
format(key, commands_layer[key]|join('\n')))}
{% for c in commands_layer[key] %}
{c}
{% endfor %}
{% set dummy = commands_layer.__delitem__(key) %}
{% endfor %}
SET_GCODE_VARIABLE MACRO=_km_layer_run VARIABLE=commands_layer VALUE="{
commands_layer|replace('\"','\\\"')}"
{% for key in commands_height | select("<=", cur_height) | sort %}
{action_respond_info("Executing scheduled commands at height %.3f:\n%s" |
format(key, commands_height[key]|join('\n')))}
{% for c in commands_height[key] %}
{c}
{% endfor %}
{% set dummy = commands_height.__delitem__(key) %}
{% endfor %}
SET_GCODE_VARIABLE MACRO=_km_layer_run VARIABLE=commands_height VALUE="{
commands_height|replace('\"','\\\"')}"
_UPDATE_LAYER_COMPAT
[gcode_macro init_layer_gcode]
description: Clears scheduled gcode commands and state for all layers.
Usage: INIT_LAYER_GCODE LAYERS=<num>
gcode:
SET_PRINT_STATS_INFO TOTAL_LAYER="{params.LAYERS|int + 1}" CURRENT_LAYER="{0}"
SET_GCODE_VARIABLE MACRO=_km_layer_run VARIABLE=cur_height VALUE="{0.0}"
SET_GCODE_VARIABLE MACRO=_km_layer_run VARIABLE=clearance_z VALUE="{0.0}"
SET_GCODE_VARIABLE MACRO=_km_layer_run VARIABLE=commands_layer VALUE="{{}}"
SET_GCODE_VARIABLE MACRO=_km_layer_run VARIABLE=commands_height VALUE="{{}}"
_UPDATE_LAYER_COMPAT
[gcode_macro _reset_layer_gcode]
description: Clears scheduled gcode commands and state for all layers.
Usage: _RESET_LAYER_GCODE
gcode:
SET_PRINT_STATS_INFO TOTAL_LAYER="{0}" CURRENT_LAYER="{0}"
SET_GCODE_VARIABLE MACRO=_km_layer_run VARIABLE=cur_height VALUE="{0.0}"
SET_GCODE_VARIABLE MACRO=_km_layer_run VARIABLE=clearance_z VALUE="{0.0}"
SET_GCODE_VARIABLE MACRO=_km_layer_run VARIABLE=commands_layer VALUE="{{}}"
SET_GCODE_VARIABLE MACRO=_km_layer_run VARIABLE=commands_height VALUE="{{}}"
_UPDATE_LAYER_COMPAT
[gcode_macro cancel_all_layer_gcode]
description: Clears all scheduled gcode commands.
Usage: CANCEL_ALL_LAYER_GCODE
gcode:
SET_GCODE_VARIABLE MACRO=_km_layer_run VARIABLE=commands_layer VALUE="{{}}"
SET_GCODE_VARIABLE MACRO=_km_layer_run VARIABLE=commands_height VALUE="{{}}"
_UPDATE_LAYER_COMPAT
#
# Begin Mainsail/Fluidd compat
#
[gcode_macro SET_PAUSE_NEXT_LAYER]
description: Enable a pause if the next layer is reached
gcode:
_KM_CHECK_IS_PRINTING
{% set pause_next_layer =
printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VALUE="{
{ 'enable': False, 'call': MACRO }}" VARIABLE=pause_next_layer
GCODE_AT_LAYER COMMAND="{MACRO|replace('\"','\\\"')
}" CANCEL="{0 if ENABLE else 1}" LAYER="next"
[gcode_macro SET_PAUSE_AT_LAYER]
description: Enable/disable a pause if a given layer number is reached
gcode:
_KM_CHECK_IS_PRINTING
{% set pause_at_layer =
printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
# This enable logic is copied directly from Fluidd/Mainsail.
{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined else
params.LAYER is defined %}
{% set LAYER = params.LAYER |
default((pause_at_layer.layer|int,
printer.print_stats.info.current_layer|int + 1)|max)%}
{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{
{ 'enable': False, 'layer': 0, 'call': MACRO }}"
{% if ENABLE and pause_at_layer.enable %}
# Remove the previously scheduled command if we're replacing it.
GCODE_AT_LAYER COMMAND="{pause_at_layer.call|replace('\"','\\\"')
}" CANCEL="{1}" LAYER="{pause_at_layer.layer}"
{% endif %}
# Add the new command.
GCODE_AT_LAYER COMMAND="{MACRO|replace('\"','\\\"')
}" CANCEL="{0 if ENABLE else 1}" LAYER="{LAYER}"
[gcode_macro SET_PRINT_STATS_INFO]
rename_existing: _KM_SET_PRINT_STATS_INFO
description: Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer: { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer : { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode:
_KM_SET_PRINT_STATS_INFO {rawparams}
[gcode_macro _update_layer_compat]
gcode:
{% set next_layer = printer.print_stats.info.current_layer|int + 1 %}
{% set commands_layer = printer["gcode_macro _km_layer_run"].commands_layer %}
{% set keys = commands_layer | sort(reverse=True) %}
{% set pause_next_layer = {'enable': False, 'call':
printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer.call} %}
{% if pause_next_layer.call in commands_layer[next_layer] | default([]) %}
{% set dummy = pause_next_layer.__setitem__('enable', True) %}
{% endif %}
SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{
pause_next_layer|replace('\"','\\\"') }"
# Don't just make pause_at_layer a copy of pause_next_layer.
{% set pause_at_layer = {'enable': False, 'layer': 0, 'call':
printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer.call} %}
{% if pause_next_layer.enable and
pause_next_layer.call == pause_at_layer.call %}
{% set keys = keys | reject("==", next_layer) %}
{% endif %}
# We iterate through the entire reverse sorted key list because Jinja2 doesn't
# have a filter for dict values. It's ugly, but there should be only a few
# items in the dict.
{% for key in keys %}
{% if pause_at_layer.call in commands_layer[key] %}
{% set dummy = pause_at_layer.__setitem__('enable', True) %}
{% set dummy = pause_at_layer.__setitem__('layer', key) %}
{% endif %}
{% endfor %}
SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{
pause_at_layer|replace('\"','\\\"') }"
#
# End Mainsail/Fluidd compat
#
[gcode_macro pause_next_layer]
description: Convenience macro to schedule the current print to pause at the
next layer change. See PAUSE for additional arguments.
Usage: PAUSE_NEXT_LAYER ...
gcode:
_CHECK_KINEMATIC_LIMITS{% for k in params%}{' ' ~k~ '=' ~ params[k]
}{% endfor %}
GCODE_AT_LAYER LAYER=NEXT COMMAND="PAUSE{% for k in params %}{
' ' ~ k ~ '=' ~ params[k]}{% endfor %}"
[gcode_macro pause_at_layer]
description: Convenience macro to schedule the current print to pause at the
specified layer change. LAYER=next will cause the command to run at the next
layer change. See PAUSE for additional arguments.
Usage: PAUSE_AT_LAYER { HEIGHT=<pos> | LAYER=<layer> } ...
gcode:
# Dummy argument block for Mainsail
{% set dummy = None if True else "
{% set dummy = params.LAYER|default(layer number)|float %}
{% set dummy = params.HEIGHT|default(Z height)|int %}
" %} # End argument block for Mainsail
{% set filtered_params = params|reject('in',['HEIGHT','LAYER'])|list|sort %}
_CHECK_KINEMATIC_LIMITS{% for k in filtered_params%}{' ' ~k~ '=' ~ params[k]
}{% endfor %}
GCODE_AT_LAYER {% for k in params|select('in',['HEIGHT','LAYER'])|list %}{
' ' ~ k ~ '=' ~ params[k] }{% endfor
%} COMMAND="PAUSE{% for k in filtered_params %}{
' ' ~ k ~ '=' ~ params[k]}{% endfor %}"
[gcode_macro speed_at_layer]
description: Convenience macro to schedule a feedrate adjustment at the
specified layer change. LAYER=next will cause the command to run at the next
layer change. (SPEED parameter behaves the same as the M220 S parameter.)
Usage: SPEED_AT_LAYER { HEIGHT=<pos> | LAYER=<layer> } SPEED=<percentage>
gcode:
{% set SPEED = params.SPEED|default(0)|int %}
{% if SPEED < 1 or SPEED > 500 %}
{action_raise_error("SPEED[%i] parameter between 1 and 500 is required."
% SPEED)}
{% endif %}
GCODE_AT_LAYER {% for k in params|select('in',['HEIGHT','LAYER'])|list %}{
' ' ~ k ~ '=' ~ params[k] }{% endfor %} COMMAND="M220 S{SPEED|int}"
# Dummy argument block for Mainsail
{% set dummy = None if True else "
{% set dummy = params.LAYER|default(layer number)|float %}
{% set dummy = params.HEIGHT|default(Z height)|int %}
{% set dummy = params.SPEED|default(percentage)|int %}
" %} # End argument block for Mainsail
[gcode_macro flow_at_layer]
description: Convenience macro to schedule a flow percentage adjustment at the
specified layer change. LAYER=next will cause the command to run at the next
layer change. (FLOW parameter behaves the same as the M221 S parameter.)
Usage: FLOW_AT_LAYER { HEIGHT=<pos> | LAYER=<layer> } FLOW=<percentage>
gcode:
{% set FLOW = params.FLOW|default(0)|int %}
{% if FLOW < 1 or FLOW > 500 %}
{action_raise_error("FLOW[%i] parameter between 1 and 500 is required."
% FLOW)}
{% endif %}
GCODE_AT_LAYER {% for k in params|select('in',['HEIGHT','LAYER'])|list %}{
' ' ~ k ~ '=' ~ params[k] }{% endfor %} COMMAND="M221 S{FLOW|int}"
# Dummy argument block for Mainsail
{% set dummy = None if True else "
{% set dummy = params.LAYER|default(layer number)|float %}
{% set dummy = params.HEIGHT|default(Z height)|int %}
{% set dummy = params.FLOW|default(percentage)|int %}
" %} # End argument block for Mainsail
[gcode_macro fan_at_layer]
description: Convenience macro to schedule a fan adjustment at the specified
layer change. LAYER=next will cause the command to run at the next layer
change. See SET_FAN_SCALING for additional arguments.
Usage: FAN_AT_LAYER { HEIGHT=<pos> | LAYER=<layer> } ...
gcode:
# Dummy argument block for Mainsail
{% set dummy = None if True else "
{% set dummy = params.LAYER|default(layer number)|float %}
{% set dummy = params.HEIGHT|default(Z height)|int %}
{% set dummy = params.SCALE|default(1.0)|float %}
{% set dummy = params.BUMP|default(0)|int %}
{% set dummy = params.MAXIMUM|default(0)|int %}
{% set dummy = params.MINIMUM|default(255)|int %}
{% set dummy = params.SPEED|default(current speed)|int %}
" %} # End argument block for Mainsail
{% set filtered_params = params|reject('in',['HEIGHT','LAYER'])|list|sort %}
{% if filtered_params|length == 0 %}
{action_raise_error("No fan parameters provided.")}
{% endif %}
_CHECK_FAN_PARAMS{% for k in filtered_params %}{' '~k~'='~params[k]
}{% endfor %}
GCODE_AT_LAYER {% for k in params|select('in',['HEIGHT','LAYER'])|list %}{
' ' ~ k ~ '=' ~ params[k] }{% endfor
%} COMMAND="SET_FAN_SCALING{% for k in filtered_params %}{
' ' ~ k ~ '=' ~ params[k]}{% endfor %}"
[gcode_macro heater_at_layer]
description: Convenience macro to schedule a heater adjustment at the specified
layer change. LAYER=next will cause the command to run at the next layer
change. See SET_HEATER_SCALING for additional arguments.
Usage: HEATER_AT_LAYER { HEIGHT=<pos> | LAYER=<layer> } ...
gcode:
# Dummy argument block for Mainsail
{% set dummy = None if True else "
{% set dummy = params.LAYER|default(layer number)|float %}
{% set dummy = params.HEIGHT|default(Z height)|int %}
{% set dummy = params.HEATER|default(e.g. extruder) %}
{% set dummy = params.SCALE|default(1.0)|float %}
{% set dummy = params.BUMP|default(0.0)|float %}
{% set dummy = params.MAXIMUM|default(max_temp)|float %}
{% set dummy = params.MINIMUM|default(min_temp)|float %}
{% set dummy = params.TARGET|default(current target)|float %}
" %} # End argument block for Mainsail
{% set filtered_params = params|reject('in',['HEIGHT','LAYER'])|list|sort %}
_CHECK_HEATER_PARAMS{% for k in filtered_params%}{' ' ~ k ~ '=' ~ params[k]
}{% endfor %}
GCODE_AT_LAYER{% for k in params|select('in',['HEIGHT','LAYER'])|list %}{
' ' ~ k ~ '=' ~ params[k] }{% endfor
%} COMMAND="SET_HEATER_SCALING{% for k in filtered_params %}{
' ' ~ k ~ '=\\\"' ~ params[k]|replace('\\','\\\\')|replace('\'','\\\'')
|replace('\"','\\\"') ~ '\\\"'
}{% endfor %}"

14
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/optional/bed_mesh.cfg Normal file
View File

@@ -0,0 +1,14 @@
# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
[gcode_macro bed_mesh_calibrate]
rename_existing: _KM_BED_MESH_CALIBRATE_BASE
description: Wraps BED_MESH_CALIBRATE, scaling probe count to specified area.
Usage: See Klipper documentation.
gcode:
BED_MESH_CALIBRATE_FAST{%for k in params%}{' '~k~'="'~params[k]~'"'}{%endfor%}
[gcode_macro g29]
gcode:
BED_MESH_CALIBRATE

976
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/optional/lcd_menus.cfg Normal file
View File

@@ -0,0 +1,976 @@
# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
################################################################################
# Existing menu refinements.
################################################################################
# Hide unused menus
[menu __main __octoprint]
type: list
name: OctoPrint
enable: {printer["gcode_macro _km_globals"].menu_show_octoprint}
# Get the file list out of the SD card menu while printing.
[menu __main __sdcard]
type: list
enable: {'virtual_sdcard' in printer and
printer["gcode_macro _km_globals"].menu_show_sdcard}
name: SD Card
[menu __main __sdcard __start]
type: command
enable: {printer.virtual_sdcard.file_path and
not printer.virtual_sdcard.is_active and
printer.print_stats.state != "printing" and
printer.print_stats.state != "paused"}
name: Print: {printer.virtual_sdcard.file_path.split('/')|last}
gcode:
M24
{menu.back()}
[menu __main __sdcard __select]
type: vsdlist
enable: {not printer.virtual_sdcard.is_active and
printer.print_stats.state != "printing" and
printer.print_stats.state != "paused"}
name: Select file
index: 1
[menu __main __sdcard __select __start]
type: command
enable: {printer.virtual_sdcard.file_path and
not printer.virtual_sdcard.is_active}
name: Print: {printer.virtual_sdcard.file_path.split('/')|last}
gcode:
M24
{menu.back()}
[menu __main __setup __calib __delta_calib_auto]
type: command
enable: {'delta_calibrate' in printer.configfile.settings and
not printer.idle_timeout.state == "Printing"}
name: Delta cal. auto
gcode:
G28
DELTA_CALIBRATE
[menu __main __setup __calib __delta_calib_man]
type: list
enable: {'delta_calibrate' in printer.configfile.settings and
not printer.idle_timeout.state == "Printing"}
name: Delta cal. man
# Require confirmation for anything that would abort an in-progress print.
# Steppers off
[menu __main __control __disable]
type: command
name: Steppers off
enable: {printer.idle_timeout.state != "Printing"}
gcode:
M84
M18
[menu __main __control __disable_printing]
type: list
index: 3
enable: {printer.idle_timeout.state == "Printing"}
name: Steppers off
[menu __main __control __disable_printing __confirm]
type: command
name: Confirm steppers off
gcode:
M84
M18
{menu.back()}
# Add a park menu item.
[menu __main __control __park]
type: command
name: Park toolhead
enable: {printer.idle_timeout.state != "Printing" or
printer.pause_resume.is_paused}
index: 1
gcode:
PARK LAZY=1
# Octoprint abort
[menu __main __octoprint __abort]
type: list
enable: {printer.idle_timeout.state == "Printing"}
name: Abort printing
[menu __main __octoprint __abort __confirm]
type: command
name: Confirm abort printing
gcode:
{action_respond_info('action:cancel')}
{menu.back()}
# SD card cancel
[menu __main __sdcard __cancel]
type: list
enable: {('virtual_sdcard' in printer) and
(printer.print_stats.state == "printing" or
printer.print_stats.state == "paused")}
name: Cancel printing
[menu __main __sdcard __cancel __confirm]
type: command
name: Confirm cancel printing
gcode:
{% if 'pause_resume' in printer %}
CANCEL_PRINT
{% else %}
M25
M27
M26 S0
TURN_OFF_HEATERS
G91
G0 Z{(printer.toolhead.position.z, printer.toolhead.axis_maximum.z - 5)|min
} F1000
G90
{% endif %}
{menu.back()}
# Extra setup menu options
# Shutdown and reboot
[menu __main __setup __restart]
type: list
name: Host Control
[menu __main __setup __restart __reboot]
type: command
name: Reboot host
gcode:
M117 Rebooting host
M118 Rebooting host
{menu.exit()}
G4 S2 ; Let the user see the console message.
{action_call_remote_method("reboot_machine")} ; Try Moonraker.
G4 S1 ; give Moonraker a chance to finish.
{action_respond_info('action:poweroff')} ; Try Octoprint.
[menu __main __setup __restart __shutdown]
type: command
name: Shutdown host
gcode:
M117 Shutting down
M118 Shutting down
{menu.exit()}
G4 S2 ; Let the user see the console message.
{action_call_remote_method("shutdown_machine")} ; Try Moonraker.
G4 S1 ; give Moonraker a chance to finish.
{action_respond_info('action:poweroff')} ; Try Octoprint.
# Speed and flow
[menu __main __setup __speed]
type: input
name: Speed: {'%3d' % (menu.input*100)}%
input: {printer.gcode_move.speed_factor}
input_min: 0.01
input_max: 5
input_step: 0.01
realtime: True
index: 4
gcode:
M220 S{'%d' % (menu.input*100)}
[menu __main __setup __flow]
type: input
name: Flow: {'%3d' % (menu.input*100)}%
input: {printer.gcode_move.extrude_factor}
input_min: 0.01
input_max: 2
input_step: 0.01
realtime: True
index: 5
gcode:
M221 S{'%d' % (menu.input*100)}
################################################################################
# Replace filament loading with our own macros.
################################################################################
[menu __main __filament]
type: list
name: Filament
enable: {printer.idle_timeout.state != "Printing" or
printer.pause_resume.is_paused}
# Hide the old load/unload commands.
[menu __main __filament __loadf]
type: command
name: Load Fil. fast
enable: False
[menu __main __filament __loads]
type: command
name: Load Fil. slow
enable: False
[menu __main __filament __unloadf]
type: command
name: Unload Fil.fast
enable: False
[menu __main __filament __unloads]
type: command
name: Unload Fil.slow
enable: False
# Add new load/unload using our macros.
[menu __main __filament __load]
type: command
index: 1
name: Load Filament
gcode:
LOAD_FILAMENT
[menu __main __filament __unload]
type: command
index: 2
name: Unload Filament
gcode:
UNLOAD_FILAMENT
[menu __main __filament __feed]
type: input
name: Feed: {'%.1f' % menu.input}
input: 0.0
input_min: -50.0
input_max: 50.0
input_step: 1.0
gcode:
SAVE_GCODE_STATE NAME=_KM_FILAMENT_LOAD
M83
G1 E{'%.1f' % menu.input
} F{printer["gcode_macro _km_globals"].load_priming_speed}
RESTORE_GCODE_STATE NAME=_KM_FILAMENT_LOAD
################################################################################
# Layer triggers.
################################################################################
[menu __main __sdcard __pause_layer]
type: input
index: 4
enable: {('virtual_sdcard' in printer) and
printer.print_stats.state == "printing"}
name: Pause {% set layer = printer.print_stats.info.current_layer %}{%
if layer >= menu.input|int %}layer{%
elif layer + 1 == menu.input|int %}at: next{%
else %}at: {menu.input|int}{% endif %}
input: {printer.print_stats.info.current_layer}
input_min: {printer.print_stats.info.current_layer}
input_max: {printer.print_stats.info.total_layer}
input_step: 1
gcode:
{% if menu.input|int > printer.print_stats.info.current_layer %}
PAUSE_AT_LAYER LAYER={menu.input}
{% endif %}
[menu __main __octoprint __pause_layer]
type: input
index: 1
enable: {printer.idle_timeout.state == "Printing"}
name: Pause {% set layer = printer.print_stats.info.current_layer %}{%
if layer >= menu.input|int %}layer{%
elif layer + 1 == menu.input|int + 1 %}at: next{%
else %}at: {menu.input|int}{% endif %}
input: {printer.print_stats.info.current_layer}
input_min: {printer.print_stats.info.current_layer}
input_max: {printer.print_stats.info.total_layer}
input_step: 1
gcode:
{% if menu.input|int > printer.print_stats.info.current_layer %}
GCODE_AT_LAYER LAYER={menu.input|int
} COMMAND="RESPOND TYPE=command MSG=action:pause"
{% endif %}
################################################################################
# Bed surface.
################################################################################
[menu __main __setup __bed_surface]
type: input
name: Bed: {(printer.save_variables.variables.bed_surfaces.available
| list | sort)[menu.input|int]}
input: {% set surfaces = printer.save_variables.variables.bed_surfaces
%}{(surfaces.available | list | sort).index(surfaces.active) | int}
input_min: 0
input_max: {((printer.save_variables.variables.bed_surfaces.available
| length) - 1)}
input_step: 1
index: 4
gcode:
SET_SURFACE_ACTIVE SURFACE={
(printer.save_variables.variables.bed_surfaces.available
| list | sort)[menu.input|int]}
[menu __main __setup __offsetz]
type: input
name: Offset Z:{ '%05.3f' % menu.input }
input: {% set surfaces = printer.save_variables.variables.bed_surfaces
%}{ surfaces.available[surfaces.active].offset | float }
input_min: -5
input_max: 5
input_step: 0.005
index: 5
realtime: True
gcode:
SET_SURFACE_OFFSET OFFSET={menu.input}
[menu __main __tune __offsetz]
type: input
name: Offset Z:{ '%05.3f' % menu.input }
input: { printer.gcode_move.homing_origin.z }
input_min: -5
input_max: 5
input_step: 0.005
realtime: True
gcode:
SET_SURFACE_OFFSET OFFSET={menu.input}
################################################################################
# Heater overrides.
################################################################################
### menu temperature ###
# Hide the original menu
[menu __main __temp]
type: list
name: Temperature
enable: False
[menu __main __temp_km]
type: list
name: Temperature
index: 4
[menu __main __temp_km __hotend0_target]
type: input
enable: {'extruder' in printer}
name: {"Ex0:%3.0f (%4.0f)" % (menu.input, printer.extruder.temperature)}
input: {printer.extruder.target}
input_min: 0
input_max: {printer.configfile.config.extruder.max_temp}
input_step: 1
gcode: SET_HEATER_TEMPERATURE HEATER=extruder TARGET={'%.0f' % menu.input}
[menu __main __temp_km __hotend1_target]
type: input
enable: {'extruder1' in printer}
name: {"Ex1:%3.0f (%4.0f)" % (menu.input, printer.extruder1.temperature)}
input: {printer.extruder1.target}
input_min: 0
input_max: {printer.configfile.config.extruder1.max_temp}
input_step: 1
gcode: SET_HEATER_TEMPERATURE HEATER=extruder1 TARGET={'%.0f' % menu.input}
[menu __main __temp_km __hotbed_target]
type: input
enable: {'heater_bed' in printer}
name: {"Bed:%3.0f (%4.0f)" % (menu.input, printer.heater_bed.temperature)}
input: {printer.heater_bed.target}
input_min: 0
input_max: {printer.configfile.config.heater_bed.max_temp}
input_step: 1
gcode: SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={'%.0f' % menu.input}
# We just create 10 preheat placeholders below, and dynamically enable and fill
# them in from the dictionary in variable_menu_temperature.
## Pre-heat [0] ##
[menu __main __temp_km __preheat_0]
type: list
name: Preheat {printer["gcode_macro _km_globals"].menu_temperature[0].name}
enable: {printer.idle_timeout.state != "Printing" and
printer["gcode_macro _km_globals"].menu_temperature|length > 0}
[menu __main __temp_km __preheat_0 __all]
type: command
enable: {printer["gcode_macro _km_globals"].menu_temperature[0] | list |
select('in', ['extruder', 'bed', 'chamber']) | list | length > 1 and
(('extruder' in printer) + ('heater_bed' in printer) +
('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
name: Preheat all
gcode:
{% set targets = printer["gcode_macro _km_globals"].menu_temperature[0] %}
{% if 'chamber' in targets and
'heater_generic chamber' in printer.heaters.available_heaters %}
SET_HEATER_TEMPERATURE HEATER=chamber TARGET={targets.chamber}
{% endif %}
{% if 'bed' in targets and 'heater_bed' in printer %}
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={targets.bed}
{% endif %}
{% if 'extruder' in targets and 'extruder' in printer %}
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
targets.extruder}
{% endif %}
[menu __main __temp_km __preheat_0 __hotend]
type: command
enable: {'extruder' in printer and
'extruder' in printer["gcode_macro _km_globals"].menu_temperature[0]}
name: Preheat hotend
gcode:
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
printer["gcode_macro _km_globals"].menu_temperature[0].extruder}
[menu __main __temp_km __preheat_0 __hotbed]
type: command
enable: {'heater_bed' in printer and
'bed' in printer["gcode_macro _km_globals"].menu_temperature[0]}
name: Preheat bed
gcode:
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={
printer["gcode_macro _km_globals"].menu_temperature[0].bed}
[menu __main __temp_km __preheat_0 __chamber]
type: command
enable: {'heater_generic chamber' in printer.heaters.available_heaters and
'chamber' in printer["gcode_macro _km_globals"].menu_temperature[0]}
name: Preheat chamber
gcode:
SET_HEATER_TEMPERATURE HEATER=chamber TARGET={
printer["gcode_macro _km_globals"].menu_temperature[0].chamber}
## Pre-heat [1] ##
[menu __main __temp_km __preheat_1]
type: list
name: Preheat {printer["gcode_macro _km_globals"].menu_temperature[1].name}
enable: {printer.idle_timeout.state != "Printing" and
printer["gcode_macro _km_globals"].menu_temperature|length > 1}
[menu __main __temp_km __preheat_1 __all]
type: command
enable: {printer["gcode_macro _km_globals"].menu_temperature[1] | list |
select('in', ['extruder', 'bed', 'chamber']) | list | length > 1 and
(('extruder' in printer) + ('heater_bed' in printer) +
('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
name: Preheat all
gcode:
{% set targets = printer["gcode_macro _km_globals"].menu_temperature[1] %}
{% if 'chamber' in targets and
'heater_generic chamber' in printer.heaters.available_heaters %}
SET_HEATER_TEMPERATURE HEATER=chamber TARGET={targets.chamber}
{% endif %}
{% if 'bed' in targets and 'heater_bed' in printer %}
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={targets.bed}
{% endif %}
{% if 'extruder' in targets and 'extruder' in printer %}
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
targets.extruder}
{% endif %}
[menu __main __temp_km __preheat_1 __hotend]
type: command
enable: {'extruder' in printer and
'extruder' in printer["gcode_macro _km_globals"].menu_temperature[1]}
name: Preheat hotend
gcode:
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
printer["gcode_macro _km_globals"].menu_temperature[1].extruder}
[menu __main __temp_km __preheat_1 __hotbed]
type: command
enable: {'heater_bed' in printer and
'bed' in printer["gcode_macro _km_globals"].menu_temperature[1]}
name: Preheat bed
gcode:
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={
printer["gcode_macro _km_globals"].menu_temperature[1].bed}
[menu __main __temp_km __preheat_1 __chamber]
type: command
enable: {'heater_generic chamber' in printer.heaters.available_heaters and
'chamber' in printer["gcode_macro _km_globals"].menu_temperature[1]}
name: Preheat chamber
gcode:
SET_HEATER_TEMPERATURE HEATER=chamber TARGET={
printer["gcode_macro _km_globals"].menu_temperature[1].chamber}
## Pre-heat [2] ##
[menu __main __temp_km __preheat_2]
type: list
name: Preheat {printer["gcode_macro _km_globals"].menu_temperature[2].name}
enable: {printer.idle_timeout.state != "Printing" and
printer["gcode_macro _km_globals"].menu_temperature|length > 2}
[menu __main __temp_km __preheat_2 __all]
type: command
enable: {printer["gcode_macro _km_globals"].menu_temperature[2] | list |
select('in', ['extruder', 'bed', 'chamber']) | list | length > 1 and
(('extruder' in printer) + ('heater_bed' in printer) +
('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
name: Preheat all
gcode:
{% set targets = printer["gcode_macro _km_globals"].menu_temperature[2] %}
{% if 'chamber' in targets and
'heater_generic chamber' in printer.heaters.available_heaters %}
SET_HEATER_TEMPERATURE HEATER=chamber TARGET={targets.chamber}
{% endif %}
{% if 'bed' in targets and 'heater_bed' in printer %}
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={targets.bed}
{% endif %}
{% if 'extruder' in targets and 'extruder' in printer %}
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
targets.extruder}
{% endif %}
[menu __main __temp_km __preheat_2 __hotend]
type: command
enable: {'extruder' in printer and
'extruder' in printer["gcode_macro _km_globals"].menu_temperature[2]}
name: Preheat hotend
gcode:
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
printer["gcode_macro _km_globals"].menu_temperature[2].extruder}
[menu __main __temp_km __preheat_2 __hotbed]
type: command
enable: {'heater_bed' in printer and
'bed' in printer["gcode_macro _km_globals"].menu_temperature[2]}
name: Preheat bed
gcode:
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={
printer["gcode_macro _km_globals"].menu_temperature[2].bed}
[menu __main __temp_km __preheat_2 __chamber]
type: command
enable: {'heater_generic chamber' in printer.heaters.available_heaters and
'chamber' in printer["gcode_macro _km_globals"].menu_temperature[2]}
name: Preheat chamber
gcode:
SET_HEATER_TEMPERATURE HEATER=chamber TARGET={
printer["gcode_macro _km_globals"].menu_temperature[2].chamber}
## Pre-heat [3] ##
[menu __main __temp_km __preheat_3]
type: list
name: Preheat {printer["gcode_macro _km_globals"].menu_temperature[3].name}
enable: {printer.idle_timeout.state != "Printing" and
printer["gcode_macro _km_globals"].menu_temperature|length > 3}
[menu __main __temp_km __preheat_3 __all]
type: command
enable: {printer["gcode_macro _km_globals"].menu_temperature[3] | list |
select('in', ['extruder', 'bed', 'chamber']) | list | length > 1 and
(('extruder' in printer) + ('heater_bed' in printer) +
('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
name: Preheat all
gcode:
{% set targets = printer["gcode_macro _km_globals"].menu_temperature[3] %}
{% if 'chamber' in targets and
'heater_generic chamber' in printer.heaters.available_heaters %}
SET_HEATER_TEMPERATURE HEATER=chamber TARGET={targets.chamber}
{% endif %}
{% if 'bed' in targets and 'heater_bed' in printer %}
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={targets.bed}
{% endif %}
{% if 'extruder' in targets and 'extruder' in printer %}
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
targets.extruder}
{% endif %}
[menu __main __temp_km __preheat_3 __hotend]
type: command
enable: {'extruder' in printer and
'extruder' in printer["gcode_macro _km_globals"].menu_temperature[3]}
name: Preheat hotend
gcode:
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
printer["gcode_macro _km_globals"].menu_temperature[3].extruder}
[menu __main __temp_km __preheat_3 __hotbed]
type: command
enable: {'heater_bed' in printer and
'bed' in printer["gcode_macro _km_globals"].menu_temperature[3]}
name: Preheat bed
gcode:
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={
printer["gcode_macro _km_globals"].menu_temperature[3].bed}
[menu __main __temp_km __preheat_3 __chamber]
type: command
enable: {'heater_generic chamber' in printer.heaters.available_heaters and
'chamber' in printer["gcode_macro _km_globals"].menu_temperature[3]}
name: Preheat chamber
gcode:
SET_HEATER_TEMPERATURE HEATER=chamber TARGET={
printer["gcode_macro _km_globals"].menu_temperature[3].chamber}
## Pre-heat [4] ##
[menu __main __temp_km __preheat_4]
type: list
name: Preheat {printer["gcode_macro _km_globals"].menu_temperature[4].name}
enable: {printer.idle_timeout.state != "Printing" and
printer["gcode_macro _km_globals"].menu_temperature|length > 4}
[menu __main __temp_km __preheat_4 __all]
type: command
enable: {printer["gcode_macro _km_globals"].menu_temperature[4] | list |
select('in', ['extruder', 'bed', 'chamber']) | list | length > 1 and
(('extruder' in printer) + ('heater_bed' in printer) +
('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
name: Preheat all
gcode:
{% set targets = printer["gcode_macro _km_globals"].menu_temperature[4] %}
{% if 'chamber' in targets and
'heater_generic chamber' in printer.heaters.available_heaters %}
SET_HEATER_TEMPERATURE HEATER=chamber TARGET={targets.chamber}
{% endif %}
{% if 'bed' in targets and 'heater_bed' in printer %}
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={targets.bed}
{% endif %}
{% if 'extruder' in targets and 'extruder' in printer %}
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
targets.extruder}
{% endif %}
[menu __main __temp_km __preheat_4 __hotend]
type: command
enable: {'extruder' in printer and
'extruder' in printer["gcode_macro _km_globals"].menu_temperature[4]}
name: Preheat hotend
gcode:
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
printer["gcode_macro _km_globals"].menu_temperature[4].extruder}
[menu __main __temp_km __preheat_4 __hotbed]
type: command
enable: {'heater_bed' in printer and
'bed' in printer["gcode_macro _km_globals"].menu_temperature[4]}
name: Preheat bed
gcode:
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={
printer["gcode_macro _km_globals"].menu_temperature[4].bed}
[menu __main __temp_km __preheat_4 __chamber]
type: command
enable: {'heater_generic chamber' in printer.heaters.available_heaters and
'chamber' in printer["gcode_macro _km_globals"].menu_temperature[4]}
name: Preheat chamber
gcode:
SET_HEATER_TEMPERATURE HEATER=chamber TARGET={
printer["gcode_macro _km_globals"].menu_temperature[4].chamber}
## Pre-heat [5] ##
[menu __main __temp_km __preheat_5]
type: list
name: Preheat {printer["gcode_macro _km_globals"].menu_temperature[5].name}
enable: {printer.idle_timeout.state != "Printing" and
printer["gcode_macro _km_globals"].menu_temperature|length > 5}
[menu __main __temp_km __preheat_5 __all]
type: command
enable: {printer["gcode_macro _km_globals"].menu_temperature[5] | list |
select('in', ['extruder', 'bed', 'chamber']) | list | length > 1 and
(('extruder' in printer) + ('heater_bed' in printer) +
('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
name: Preheat all
gcode:
{% set targets = printer["gcode_macro _km_globals"].menu_temperature[5] %}
{% if 'chamber' in targets and
'heater_generic chamber' in printer.heaters.available_heaters %}
SET_HEATER_TEMPERATURE HEATER=chamber TARGET={targets.chamber}
{% endif %}
{% if 'bed' in targets and 'heater_bed' in printer %}
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={targets.bed}
{% endif %}
{% if 'extruder' in targets and 'extruder' in printer %}
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
targets.extruder}
{% endif %}
[menu __main __temp_km __preheat_5 __hotend]
type: command
enable: {'extruder' in printer and
'extruder' in printer["gcode_macro _km_globals"].menu_temperature[5]}
name: Preheat hotend
gcode:
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
printer["gcode_macro _km_globals"].menu_temperature[5].extruder}
[menu __main __temp_km __preheat_5 __hotbed]
type: command
enable: {'heater_bed' in printer and
'bed' in printer["gcode_macro _km_globals"].menu_temperature[5]}
name: Preheat bed
gcode:
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={
printer["gcode_macro _km_globals"].menu_temperature[5].bed}
[menu __main __temp_km __preheat_5 __chamber]
type: command
enable: {'heater_generic chamber' in printer.heaters.available_heaters and
'chamber' in printer["gcode_macro _km_globals"].menu_temperature[5]}
name: Preheat chamber
gcode:
SET_HEATER_TEMPERATURE HEATER=chamber TARGET={
printer["gcode_macro _km_globals"].menu_temperature[5].chamber}
## Pre-heat [6] ##
[menu __main __temp_km __preheat_6]
type: list
name: Preheat {printer["gcode_macro _km_globals"].menu_temperature[6].name}
enable: {printer.idle_timeout.state != "Printing" and
printer["gcode_macro _km_globals"].menu_temperature|length > 6}
[menu __main __temp_km __preheat_6 __all]
type: command
enable: {printer["gcode_macro _km_globals"].menu_temperature[6] | list |
select('in', ['extruder', 'bed', 'chamber']) | list | length > 1 and
(('extruder' in printer) + ('heater_bed' in printer) +
('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
name: Preheat all
gcode:
{% set targets = printer["gcode_macro _km_globals"].menu_temperature[6] %}
{% if 'chamber' in targets and
'heater_generic chamber' in printer.heaters.available_heaters %}
SET_HEATER_TEMPERATURE HEATER=chamber TARGET={targets.chamber}
{% endif %}
{% if 'bed' in targets and 'heater_bed' in printer %}
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={targets.bed}
{% endif %}
{% if 'extruder' in targets and 'extruder' in printer %}
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
targets.extruder}
{% endif %}
[menu __main __temp_km __preheat_6 __hotend]
type: command
enable: {'extruder' in printer and
'extruder' in printer["gcode_macro _km_globals"].menu_temperature[6]}
name: Preheat hotend
gcode:
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
printer["gcode_macro _km_globals"].menu_temperature[6].extruder}
[menu __main __temp_km __preheat_6 __hotbed]
type: command
enable: {'heater_bed' in printer and
'bed' in printer["gcode_macro _km_globals"].menu_temperature[6]}
name: Preheat bed
gcode:
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={
printer["gcode_macro _km_globals"].menu_temperature[6].bed}
[menu __main __temp_km __preheat_6 __chamber]
type: command
enable: {'heater_generic chamber' in printer.heaters.available_heaters and
'chamber' in printer["gcode_macro _km_globals"].menu_temperature[6]}
name: Preheat chamber
gcode:
SET_HEATER_TEMPERATURE HEATER=chamber TARGET={
printer["gcode_macro _km_globals"].menu_temperature[6].chamber}
## Pre-heat [7] ##
[menu __main __temp_km __preheat_7]
type: list
name: Preheat {printer["gcode_macro _km_globals"].menu_temperature[7].name}
enable: {printer.idle_timeout.state != "Printing" and
printer["gcode_macro _km_globals"].menu_temperature|length > 7}
[menu __main __temp_km __preheat_7 __all]
type: command
enable: {printer["gcode_macro _km_globals"].menu_temperature[7] | list |
select('in', ['extruder', 'bed', 'chamber']) | list | length > 1 and
(('extruder' in printer) + ('heater_bed' in printer) +
('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
name: Preheat all
gcode:
{% set targets = printer["gcode_macro _km_globals"].menu_temperature[7] %}
{% if 'chamber' in targets and
'heater_generic chamber' in printer.heaters.available_heaters %}
SET_HEATER_TEMPERATURE HEATER=chamber TARGET={targets.chamber}
{% endif %}
{% if 'bed' in targets and 'heater_bed' in printer %}
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={targets.bed}
{% endif %}
{% if 'extruder' in targets and 'extruder' in printer %}
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
targets.extruder}
{% endif %}
[menu __main __temp_km __preheat_7 __hotend]
type: command
enable: {'extruder' in printer and
'extruder' in printer["gcode_macro _km_globals"].menu_temperature[7]}
name: Preheat hotend
gcode:
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
printer["gcode_macro _km_globals"].menu_temperature[7].extruder}
[menu __main __temp_km __preheat_7 __hotbed]
type: command
enable: {'heater_bed' in printer and
'bed' in printer["gcode_macro _km_globals"].menu_temperature[7]}
name: Preheat bed
gcode:
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={
printer["gcode_macro _km_globals"].menu_temperature[7].bed}
[menu __main __temp_km __preheat_7 __chamber]
type: command
enable: {'heater_generic chamber' in printer.heaters.available_heaters and
'chamber' in printer["gcode_macro _km_globals"].menu_temperature[7]}
name: Preheat chamber
gcode:
SET_HEATER_TEMPERATURE HEATER=chamber TARGET={
printer["gcode_macro _km_globals"].menu_temperature[7].chamber}
## Pre-heat [8] ##
[menu __main __temp_km __preheat_8]
type: list
name: Preheat {printer["gcode_macro _km_globals"].menu_temperature[8].name}
enable: {printer.idle_timeout.state != "Printing" and
printer["gcode_macro _km_globals"].menu_temperature|length > 8}
[menu __main __temp_km __preheat_8 __all]
type: command
enable: {printer["gcode_macro _km_globals"].menu_temperature[8] | list |
select('in', ['extruder', 'bed', 'chamber']) | list | length > 1 and
(('extruder' in printer) + ('heater_bed' in printer) +
('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
name: Preheat all
gcode:
{% set targets = printer["gcode_macro _km_globals"].menu_temperature[8] %}
{% if 'chamber' in targets and
'heater_generic chamber' in printer.heaters.available_heaters %}
SET_HEATER_TEMPERATURE HEATER=chamber TARGET={targets.chamber}
{% endif %}
{% if 'bed' in targets and 'heater_bed' in printer %}
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={targets.bed}
{% endif %}
{% if 'extruder' in targets and 'extruder' in printer %}
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
targets.extruder}
{% endif %}
[menu __main __temp_km __preheat_8 __hotend]
type: command
enable: {'extruder' in printer and
'extruder' in printer["gcode_macro _km_globals"].menu_temperature[8]}
name: Preheat hotend
gcode:
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
printer["gcode_macro _km_globals"].menu_temperature[8].extruder}
[menu __main __temp_km __preheat_8 __hotbed]
type: command
enable: {'heater_bed' in printer and
'bed' in printer["gcode_macro _km_globals"].menu_temperature[8]}
name: Preheat bed
gcode:
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={
printer["gcode_macro _km_globals"].menu_temperature[8].bed}
[menu __main __temp_km __preheat_8 __chamber]
type: command
enable: {'heater_generic chamber' in printer.heaters.available_heaters and
'chamber' in printer["gcode_macro _km_globals"].menu_temperature[8]}
name: Preheat chamber
gcode:
SET_HEATER_TEMPERATURE HEATER=chamber TARGET={
printer["gcode_macro _km_globals"].menu_temperature[8].chamber}
## Pre-heat [9] ##
[menu __main __temp_km __preheat_9]
type: list
name: Preheat {printer["gcode_macro _km_globals"].menu_temperature[9].name}
enable: {printer.idle_timeout.state != "Printing" and
printer["gcode_macro _km_globals"].menu_temperature|length > 9}
[menu __main __temp_km __preheat_9 __all]
type: command
enable: {printer["gcode_macro _km_globals"].menu_temperature[9] | list |
select('in', ['extruder', 'bed', 'chamber']) | list | length > 1 and
(('extruder' in printer) + ('heater_bed' in printer) +
('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
name: Preheat all
gcode:
{% set targets = printer["gcode_macro _km_globals"].menu_temperature[9] %}
{% if 'chamber' in targets and
'heater_generic chamber' in printer.heaters.available_heaters %}
SET_HEATER_TEMPERATURE HEATER=chamber TARGET={targets.chamber}
{% endif %}
{% if 'bed' in targets and 'heater_bed' in printer %}
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={targets.bed}
{% endif %}
{% if 'extruder' in targets and 'extruder' in printer %}
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
targets.extruder}
{% endif %}
[menu __main __temp_km __preheat_9 __hotend]
type: command
enable: {'extruder' in printer and
'extruder' in printer["gcode_macro _km_globals"].menu_temperature[9]}
name: Preheat hotend
gcode:
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
printer["gcode_macro _km_globals"].menu_temperature[9].extruder}
[menu __main __temp_km __preheat_9 __hotbed]
type: command
enable: {'heater_bed' in printer and
'bed' in printer["gcode_macro _km_globals"].menu_temperature[9]}
name: Preheat bed
gcode:
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={
printer["gcode_macro _km_globals"].menu_temperature[9].bed}
[menu __main __temp_km __preheat_9 __chamber]
type: command
enable: {'heater_generic chamber' in printer.heaters.available_heaters and
'chamber' in printer["gcode_macro _km_globals"].menu_temperature[9]}
name: Preheat chamber
gcode:
SET_HEATER_TEMPERATURE HEATER=chamber TARGET={
printer["gcode_macro _km_globals"].menu_temperature[9].chamber}
## Cooldown ##
[menu __main __temp_km __cooldown_all]
type: command
enable: {printer.idle_timeout.state != "Printing" and
(('extruder' in printer) + ('heater_bed' in printer) +
('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
name: Cooldown all
gcode:
{% if 'heater_generic chamber' in printer.heaters.available_heaters %}
SET_HEATER_TEMPERATURE HEATER=chamber TARGET=0
{% endif %}
{% if 'heater_bed' in printer %}
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=0
{% endif %}
{% if 'extruder' in printer%}
SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET=0
{% endif %}
[menu __main __temp_km __cooldown_hotend]
type: command
enable: {printer.idle_timeout.state != "Printing" and 'extruder' in printer}
name: Cooldown hotend
gcode: M104 S0
[menu __main __temp_km __cooldown_hotbed]
type: command
enable: {printer.idle_timeout.state != "Printing" and 'heater_bed' in printer}
name: Cooldown bed
gcode: M140 S0
[menu __main __temp_km __cooldown_chamber]
type: command
enable: {printer.idle_timeout.state != "Printing" and
'heater_generic chamber' in printer.heaters.available_heaters}
name: Cooldown chamber
gcode: M141 S0

91
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/park.cfg Normal file
View File

@@ -0,0 +1,91 @@
# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
[gcode_macro park]
description: Park the toolhead
Usage: PARK [P=<0|1|2>] [X=<pos>] [Y=<pos>] [Z=<pos>] [LAZY=<1|0>]
gcode:
{% set km = printer["gcode_macro _km_globals"] %}
{% set LAZY = params.LAZY|default(1)|int %}
{% if printer.toolhead.homed_axes != "xyz" %}
{% if LAZY %}
LAZY_HOME
{% else %}
{action_raise_error("Must home axes first.")}
{% endif %}
{% endif %}
# Z position type from G27 (if below, absolute, relative)
{% set P = (params.P|default(2))|int %} # Default to 2 because it's sanest.
{% set X = params.X|default(km.park_x)|float %}
{% set Y = params.Y|default(km.park_y)|float %}
{% set Z = params.Z|default(km.park_z)|float %}
M400
_CHECK_KINEMATIC_LIMITS X="{X}" Y="{Y}" Z="{Z}"
_PARK_INNER X="{X}" Y="{Y}" Z="{Z}" P="{P}" LAZY="{LAZY}"
# Dummy argument block for Mainsail
{% set dummy = None if True else "
{% set dummy = params.P|default(mode=<0|1|2>)|int %}
{% set dummy = params.X|default(X position)|int %}
{% set dummy = params.Y|default(Y position)|int %}
{% set dummy = params.Z|default(Z position)|int %}
" %} # End argument block for Mainsail
[gcode_macro _park_inner]
gcode:
{% set km = printer["gcode_macro _km_globals"] %}
{% set travel_speed_xy = km.travel_speed_xy %}
{% set travel_speed_z = km.travel_speed_z %}
{% set position = printer.gcode_move.gcode_position %}
{% set origin = printer.gcode_move.homing_origin%}
# Use the taller of the highest printed layer or the current Z height, which
# should help avoid crashes (e.g. when a sequential print in progress).
{% set clearance_z = (printer["gcode_macro _km_layer_run"].clearance_z,
position.z) | max %}
{% set P = params.P|int %}
{% set X = params.X|float - origin.x %}
{% set Y = params.Y|float - origin.y %}
{% set Z = params.Z|float %}
{% set LAZY = params.LAZY|int %}
# Convert everything to absolute coordinates.
{% if P == 0 %} # Move absolute to Z if below current Z
{% if clearance_z > Z %}
{% set Z = clearance_z %}
{% endif %}
{% elif P == 1 %} # Move Z absolute.
{% set Z = Z - origin.z %}
{% elif P == 2 %} # Move Z relative
{% set Z = Z + clearance_z %}
{% else %}
{action_raise_error("Invalid parameter P=%i. Value must be 0, 1, or 2." |
format(P)) }
{% endif %}
# Clamp to the printer limits.
{% set Z = ((Z, printer.toolhead.axis_maximum.z - origin.z)|min,
printer.toolhead.axis_minimum.z - origin.z)|max %}
# Don't move if it's a lazy park and we're already in position.
{% if (not LAZY) or P != 2 or X != position.x or Y != position.y
or Z < clearance_z %}
SAVE_GCODE_STATE NAME=_KM_PARK
G90
G0 Z{Z} F{travel_speed_z}
G0 X{X} Y{Y} F{travel_speed_xy}
RESTORE_GCODE_STATE NAME=_KM_PARK MOVE=0
{% endif %}
[gcode_macro g27]
description: Parks the toolhead.
Usage: G27 [P=<0|1|2>]
gcode:
# Wraps any arguments for the PARK macro and defaults P=0 for Marlin compat.
PARK P={params.P|default(0)} {% for k in params|reject("in", "GP") %}{
' '~k~'="'~params[k]~'"'
}{% endfor %}

144
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/pause_resume_cancel.cfg Normal file
View File

@@ -0,0 +1,144 @@
# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
# Enables pause/resume functionality
[gcode_macro pause]
description: Pauses the current print.
Usage: PAUSE [X=<pos>] [Y=<pos>] [Z=<pos>] [E=<retract_length>] [B=<beeps>]
rename_existing: _KM_PAUSE_BASE
gcode:
{% set km = printer["gcode_macro _km_globals"] %}
# Retract length (negative)
{% set E = (params.E|default(5))|float %}
{% if printer.pause_resume.is_paused %}
{ action_respond_info("Print already paused") }
{% elif printer.idle_timeout.state | string == "Printing" or
(printer.virtual_sdcard|default({})).is_active|default(False) %}
_KM_PRINT_STATUS ACTION=CHANGE STATUS=pausing RESET_STACK=1
{% set position = printer.gcode_move.gcode_position %}
SET_GCODE_VARIABLE MACRO=resume VARIABLE=saved_x VALUE="{position.x}"
SET_GCODE_VARIABLE MACRO=resume VARIABLE=saved_y VALUE="{position.y}"
SET_GCODE_VARIABLE MACRO=resume VARIABLE=saved_z VALUE="{position.z}"
SET_GCODE_VARIABLE MACRO=resume VARIABLE=saved_e VALUE="{E}"
SAVE_GCODE_STATE NAME=_KM_PAUSE_OVERRIDE_STATE
_KM_PAUSE_BASE
M83
{% if printer.extruder.can_extrude %}
G1 E{'%.4f' % -E} F{km.load_speed}
{% endif %}
PARK P=2{% for k in params|select("in", "XYZ") %}{
' '~k~'="'~params[k]~'"'}{% endfor %}
_KM_BEEP_IF_AVAILABLE BEEPS={params.B|default(10)}
{% else %}
{ action_respond_info("Print not in progress") }
{% endif %}
[gcode_macro m600]
description: Pauses the current print.
Usage: M600 [B<beeps>] [E<pos>] [L<pos>] [R<temp>] [U<pos>] [X<pos>] [Y<pos>]
[Z<pos>]
gcode:
PAUSE B="{0}" P=2{% for k in params|select("in", "EXYZ") %}{
' '~k~'="'~params[k]~'"'}{% endfor %}
UNLOAD_FILAMENT{% if 'U' in params %} LENGTH={params.U}{% endif
%} BEEPS="{params.B|default(10)|int}"
{% if 'R' in params %}M109 S{params.R}{% endif %}
[gcode_macro m601]
description: Pauses the current print.
Usage: M601
gcode:
PAUSE
[gcode_macro m602]
description: Resumes the currently paused print.
Usage: M602
gcode:
RESUME
[gcode_macro m24]
rename_existing: M24.6245197
gcode:
{% if printer.pause_resume.is_paused %}
RESUME
{% else %}
M24.6245197
{% endif %}
[gcode_macro m25]
rename_existing: M25.6245197
gcode:
PAUSE
[gcode_macro resume]
description: Resumes the currently paused print.
Usage: RESUME [E<pos>]
rename_existing: _KM_RESUME_BASE
variable_saved_extruder_temp: 0
variable_saved_x: 0.0
variable_saved_y: 0.0
variable_saved_z: 0.0
variable_saved_e: 0.0
gcode:
{% if printer.pause_resume.is_paused %}
{% set km = printer["gcode_macro _km_globals"] %}
# Warm the extruder back up if needed.
{% set extruder = printer[printer.toolhead.extruder] %}
{% if extruder.target <= printer.configfile.settings[
printer.toolhead.extruder].min_temp
| float + 0.5 %}
M109 S{saved_extruder_temp}
{% endif %}
# If there's no saved_e assume we're completing a filament change and
# retract enough to avoid drooling on the model.
{% if 'E' not in params and not saved_e %}
{% set saved_e = 5.0 %}
G1 E{'%.4f' % -saved_e } F{km.load_speed}
{% endif %}
SET_GCODE_VARIABLE MACRO=resume VARIABLE=saved_extruder_temp VALUE="{0}"
G90
# Move back to last position before unretracting.
G0 X{saved_x} Y{saved_y} F{km.travel_speed_xy}
G0 Z{saved_z} F{km.travel_speed_z}
G91
# Unretract
G1 E{'%.4f' % (params.E|default(saved_e))} F{km.load_speed}
RESTORE_GCODE_STATE NAME=_KM_PAUSE_OVERRIDE_STATE MOVE=1
_KM_RESUME_BASE
{% else %}
{ action_respond_info("Printer is not paused.") }
{% endif %}
_KM_PRINT_STATUS ACTION=CHANGE STATUS=printing RESET_STACK=1
# TODO: Fix casing after front-ends get fixed
[gcode_macro CANCEL_PRINT]
description: Cancels the current print.
Usage: CANCEL_PRINT
rename_existing: _KM_CANCEL_PRINT_BASE
gcode:
_KM_CHECK_IS_PRINTING
_KM_PRINT_STATUS ACTION=CHANGE STATUS=cancelling RESET_STACK=1
SET_GCODE_VARIABLE MACRO=_print_end_inner VARIABLE=cancelled VALUE="{True}"
PRINT_END
_KM_CANCEL_PRINT_BASE
{% if printer.pause_resume.is_paused %}
RESTORE_GCODE_STATE NAME=_KM_PAUSE_OVERRIDE_STATE MOVE=0
{% endif %}
CLEAR_PAUSE
_KM_APPLY_PRINT_OFFSET RESET=1
{% if 'virtual_sdcard' in printer and not printer.virtual_sdcard.is_active %}
SDCARD_RESET_FILE
{% endif %}
[gcode_macro clear_pause]
description: Clears the current pause state.
Usage: CLEAR_PAUSE
rename_existing: _KM_CLEAR_PAUSE
gcode:
SET_GCODE_VARIABLE MACRO=resume VARIABLE=saved_e VALUE="{0.0}"
SET_GCODE_VARIABLE MACRO=resume VARIABLE=saved_extruder_temp VALUE="{0}"
_KM_CLEAR_PAUSE

484
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/start_end.cfg Normal file
View File

@@ -0,0 +1,484 @@
# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
[gcode_macro print_start]
description: Inserted by slicer at start of print. Rather than using this macro
directly you should configure your slicer as instructed in the readme.
Usage: PRINT_START BED=<temp> EXTRUDER=<temp> [CHAMBER=<temp>]
[MESH_MIN=<x,y>] [MESH_MAX=<x,y>] [LAYERS=<num>]
[NOZZLE_SIZE=<mm>]
gcode:
{action_respond_info(
"This file is using an old The PRINT_START format. This print will run "
"fine, but you should update your slicer config to take advantage of the "
"phased PRINT_START macros. The slicer documentation is here:\n"
"https://github.com/jschuh/klipper-macros\x23slicer-configuration"
)}
_PRINT_START_PHASE_INIT {rawparams}
_PRINT_START_PHASE_PREHEAT
_PRINT_START_PHASE_PROBING
_PRINT_START_PHASE_EXTRUDER
_PRINT_START_PHASE_PURGE
[gcode_macro _print_start_phase_init]
description: Inserted by slicer at start of print. Initializes PRINT_START
phases.
Usage: See PRINT_START.
gcode:
CHECK_KM_CONFIG # Need this in case startup errors were missed.
SET_GCODE_VARIABLE MACRO=_print_end_inner VARIABLE=cancelled VALUE="{False}"
_KM_APPLY_PRINT_OFFSET RESET=1
_PRINT_START_PHASE_CHECK PHASE=none
{% set km = printer["gcode_macro _km_globals"] %}
{% if not params.BED %}
{% set dummy = params.__setitem__('BED', params.BED_TEMP|int) %}
{% endif %}
{% if not params.EXTRUDER %}
{% set dummy = params.__setitem__('EXTRUDER', params.EXTRUDER_TEMP|int) %}
{% endif %}
# Stash all the params for use by the other phases.
PRINT_START_SET PRINT_START_PHASE="init" {% for k in params %}{' %s=\"%s\"' %
(k,params[k]|replace('\\','\\\\')|replace('\'','\\\'')|replace('\"','\\\"'))
}{% endfor %}
# Check and propogate the printable bounds.'
_km_check_and_set_print_bounds
M107 # Turn off part cooling fan in case it was on.
CLEAR_PAUSE
# Kick off the longest preheats in the init.
M140 S{params.BED}
{% if params.CHAMBER %}M141 S{params.CHAMBER|int}{% endif %}
{% if printer.bed_mesh %}BED_MESH_CLEAR{% endif %}
# Load a saved mesh if configured.
{% if km.start_try_saved_surface_mesh and printer.bed_mesh %}
LOAD_SURFACE_MESH
{% endif %}
PRINT_START_SET PRINT_START_PHASE="preheat"
[gcode_macro _print_start_phase_preheat]
description: Inserted by slicer at start of print. Handles the bed and chamber
heating phases and ends when both are stabilized at their target temperatures.
Usage: See PRINT_START.
gcode:
_PRINT_START_PHASE_CHECK PHASE=preheat
{% set print = printer["gcode_macro print_start_set"].print %}
{% set BED = print.BED|int %}
{% set EXTRUDER = print.EXTRUDER|int %}
{% set CHAMBER = print.CHAMBER|default(0)|int %}
{% set LAYERS = print.LAYERS|default(0)|int %}
{% set km = printer["gcode_macro _km_globals"] %}
# The bed started at no more than 0.2C below and 1.0C above the target temp.
{% set bed_at_target = (BED + 0.4 - printer.heater_bed.temperature) |
abs <= 0.6 %}
PRINT_START_SET BED_AT_TARGET={1 if bed_at_target else 0}
{% set start_level_bed_at_temp = km.start_level_bed_at_temp and
not printer.bed_mesh.profile_name %}
{% set actions_at_temp = start_level_bed_at_temp or
km.start_quad_gantry_level_at_temp or
km.start_z_tilt_adjust_at_temp or
(km.start_home_z_at_temp and not bed_at_target) %}
{% set bed_overshoot = (BED + (km.start_bed_heat_overshoot if
(BED and not bed_at_target) else 0.0),
printer.configfile.settings.heater_bed.max_temp ) | min %}
INIT_LAYER_GCODE LAYERS="{LAYERS}"
{% if CHAMBER > 0.0 %}
M141 S{CHAMBER}
{% endif %}
# Start bed heating
M140 S{bed_overshoot}
{% if actions_at_temp %}
# If we're going to run a bed level we either have a probing temp specified
# or we heat the extruder part way to avoid oozing while probing.
M104 S{km.start_extruder_probing_temp if km.start_extruder_probing_temp > 0
else (km.start_extruder_preheat_scale * EXTRUDER)|round(0,'ceil')|int}
{% else %}
# Honor the extruder probing temp, in case we just want to delay extruder
# heating until after the bed is ready.
M104 S{km.start_extruder_probing_temp if km.start_extruder_probing_temp > 0
else EXTRUDER}
{% endif %}
# home all axes
_KM_PRINT_STATUS ACTION=CHANGE STATUS=homing RESET_STACK=1
G28
G90
{% if BED > 0.0 %}
_KM_PRINT_STATUS ACTION=CHANGE STATUS=bed_heating RESET_STACK=1
# Skip this if the bed was already at target when START_PRINT was called.
{% if not bed_at_target %}
PARK
# Overshoot the target a bit.
M190 S{bed_overshoot}
G4 P{km.start_bed_heat_delay / 2}
M190 R{BED} # Settle down after the overshoot.
G4 P{km.start_bed_heat_delay / 2}
{% endif %}
{% endif %}
{% if CHAMBER > 0.0 %}
_KM_PRINT_STATUS ACTION=CHANGE STATUS=chamber_heating RESET_STACK=1
_KM_PARK_IF_NEEDED HEATER="chamber" RANGE=ABOVE
M191 S{CHAMBER}
{% endif %}
{% if BED > 0.0 and bed_at_target%}
M190 R{BED} # Extra bed stabilization if we skipped it earlier.
{% endif %}
PRINT_START_SET PRINT_START_PHASE="probing"
[gcode_macro _print_start_phase_probing]
description: Inserted by slicer at start of print. Performs probing (including
mesh bed level) and other operations that should be run when the bed and
chamber are stabilized at their target temps.
Usage: See PRINT_START.
gcode:
_PRINT_START_PHASE_CHECK PHASE=probing
{% set print = printer["gcode_macro print_start_set"].print %}
{% set km = printer["gcode_macro _km_globals"] %}
{% set MESH_MIN = print.MESH_MIN|default(None) %}
{% set MESH_MAX = print.MESH_MAX|default(None) %}
# Randomize the placement of the print on the bed.
{% if km.start_random_placement_max > 0 and print.PRINT_MIN and MESH_MIN %}
{% set PRINT_MIN = print.PRINT_MIN.split(",")|map('float')|list %}
{% set PRINT_MAX = print.PRINT_MAX.split(",")|map('float')|list %}
{% set x_offset = (((km.print_max[0] - km.print_min[0] - PRINT_MAX[0] +
PRINT_MIN[0] - 2 * km.start_random_placement_padding)|int,
km.start_random_placement_max * 2)|min, 0)|max %}
{% set y_offset = (((km.print_max[1] - km.print_min[1] - PRINT_MAX[1] +
PRINT_MIN[1] - 2 * km.start_random_placement_padding)|int,
km.start_random_placement_max * 2)|min, 0)|max %}
{% if x_offset > 0 %}
{% set x_offset = range(x_offset)|random + km.print_min[0] -
PRINT_MIN[0] + km.start_random_placement_padding %}
{% endif %}
{% if y_offset > 0 %}
{% set y_offset = range(y_offset)|random + km.print_min[1] -
PRINT_MIN[1] + km.start_random_placement_padding %}
{% endif %}
# This MESH_MIN/MESH_MAX gets passed to BED_MESH_CALIBRATE below, but the
# rest of the macros rely on SET_GCODE_OFFSET performing the adjustment.
{% set MESH_MIN = MESH_MIN.split(",")|map('float')|list %}
{% set MESH_MAX = MESH_MAX.split(",")|map('float')|list %}
{% set MESH_MIN_NEW = (MESH_MIN[0] + x_offset, MESH_MIN[1] + y_offset) %}
{% set MESH_MAX_NEW = (MESH_MAX[0] + x_offset, MESH_MAX[1] + y_offset) %}
{action_respond_info(
"Relocating print origin from (%.3f,%.3f) "|format(*MESH_MIN) +
"to (%.3f,%.3f)"|format(*MESH_MIN_NEW))}
{% set MESH_MIN = (MESH_MIN_NEW[0], MESH_MIN_NEW[1])|join(',') %}
{% set MESH_MAX = (MESH_MAX_NEW[0], MESH_MAX_NEW[1])|join(',') %}
PRINT_START_SET PRINT_OFFSET={"%d,%d" % (x_offset,y_offset)}
{% endif %}
{% set EXTRUDER = print.EXTRUDER|int %}
{% set km = printer["gcode_macro _km_globals"] %}
{% set start_level_bed_at_temp = km.start_level_bed_at_temp and
not printer.bed_mesh.profile_name %}
{% set start_home_z_at_temp = km.start_home_z_at_temp and
not print.BED_AT_TARGET|int %}
{% set actions_at_temp = start_level_bed_at_temp or
km.start_quad_gantry_level_at_temp or
km.start_z_tilt_adjust_at_temp or
start_home_z_at_temp %}
{% if actions_at_temp %}
{% if km.start_extruder_probing_temp > 0 %}
_KM_PRINT_STATUS ACTION=CHANGE STATUS=extruder_heating RESET_STACK=1
_KM_PARK_IF_NEEDED HEATER={printer.toolhead.extruder} RANGE=2
M109 R{km.start_extruder_probing_temp}
{% else %}
M104 S{EXTRUDER} # set the final extruder target temperature
{% endif %}
{% if km.start_z_tilt_adjust_at_temp %}
_KM_PRINT_STATUS ACTION=CHANGE STATUS=calibrating_z RESET_STACK=1
Z_TILT_ADJUST
{% endif %}
{% if km.start_quad_gantry_level_at_temp %}
_KM_PRINT_STATUS ACTION=CHANGE STATUS=leveling_gantry RESET_STACK=1
QUAD_GANTRY_LEVEL
{% endif %}
{% if start_home_z_at_temp %}
_KM_PRINT_STATUS ACTION=CHANGE STATUS=homing RESET_STACK=1
G28 Z # Re-home only the Z axis now that the bed has stabilized.
{% endif %}
{% if start_level_bed_at_temp %}
_KM_PRINT_STATUS ACTION=CHANGE STATUS=meshing RESET_STACK=1
_km_mesh_if_needed {% if MESH_MIN %} MESH_MIN={MESH_MIN}{% endif
%}{% if MESH_MAX %} MESH_MAX={MESH_MAX}{% endif %}
{% endif %}
{% if km.start_extruder_probing_temp > 0 %}
M104 S{EXTRUDER} # set the final extruder target temperature
{% endif %}
G4
{% endif %}
PRINT_START_SET PRINT_START_PHASE="extruder"
[gcode_macro _print_start_phase_extruder]
description: Inserted by slicer at start of print. Preheats the extruder.
Usage: See PRINT_START.
gcode:
_PRINT_START_PHASE_CHECK PHASE=extruder
{% set print = printer["gcode_macro print_start_set"].print %}
{% set EXTRUDER = print.EXTRUDER|default(print.EXTRUDER_TEMP)|float %}
{% set km = printer["gcode_macro _km_globals"] %}
# Wait for extruder to reach temperature
{% if EXTRUDER > 0 %}
_KM_PRINT_STATUS ACTION=CHANGE STATUS=extruder_heating RESET_STACK=1
_KM_PARK_IF_NEEDED HEATER={printer.toolhead.extruder} RANGE=ABOVE
M109 S{EXTRUDER}
{% endif %}
PRINT_START_SET PRINT_START_PHASE="purge"
[gcode_macro _print_start_phase_purge]
description: Inserted by slicer at start of print. Generates purge lines.
Usage: See PRINT_START.
gcode:
_PRINT_START_PHASE_CHECK PHASE=purge
# Apply the offset for bed placement randomization.
_KM_APPLY_PRINT_OFFSET
# apply Z offset for bed surface (just in case it was reset).
_APPLY_BED_SURFACE_OFFSET
{% set print = printer["gcode_macro print_start_set"].print %}
{% set MESH_MIN = print.MESH_MIN|default(None) %}
{% set MESH_MAX = print.MESH_MAX|default(None) %}
{% set NOZZLE_SIZE = print.NOZZLE_SIZE|default(print.NOZZLE_SIZE)|
default(printer.configfile.settings.extruder.nozzle_diameter)|float %}
{% set km = printer["gcode_macro _km_globals"] %}
{% if km.start_purge_length > 0.0 and printer.extruder.can_extrude %}
_KM_PRINT_STATUS ACTION=CHANGE STATUS=purging RESET_STACK=1
DRAW_PURGE_LINE WIDTH="{NOZZLE_SIZE * 1.25}" HEIGHT="{NOZZLE_SIZE * 0.625
}"{% if MESH_MIN %} PRINT_MIN={MESH_MIN}{% endif
%}{% if MESH_MAX %} PRINT_MAX={MESH_MAX}{% endif %}
{% endif %}
PRINT_START_SET PRINT_START_PHASE="printing"
_KM_PRINT_STATUS ACTION=CHANGE STATUS=printing RESET_STACK=1
[gcode_macro _km_park_if_needed]
description: Parks the extruder if the current temperature of the supplied
heater is not within the specified target range.
Usage: _KM_PARK_IF_NEEDED HEATER=<heater> RANGE=[<percentage>|ABOVE|BELOW]
gcode:
# This needs to get called as its own macro to get the current temp evaluated.
{% set HEATER = params.HEATER if params.HEATER in
printer.heaters.available_heaters else
("heater_generic " ~ params.HEATER) %}
{% set RANGE = (params.RANGE|default(1))|string|upper %}
{% if printer[HEATER].target %}
{% if RANGE == "ABOVE" %}
{% if printer[HEATER].temperature < printer[HEATER].target %}
PARK
{% endif %}
{% elif RANGE == "BELOW" %}
{% if printer[HEATER].temperature > printer[HEATER].target %}
PARK
{% endif %}
{% elif (printer[HEATER].temperature - printer[HEATER].target)|abs >
(printer[HEATER].target * RANGE|float * 0.01)|abs %}
PARK
{% endif %}
{% endif %}
[gcode_macro _km_apply_print_offset]
variable_offset: []
gcode:
{% set print = printer["gcode_macro print_start_set"].print %}
{% if params.RESET|default(0)|int and offset and
not printer["gcode_macro _km_save_state"].is_ephemeral%}
{% set PRINT_OFFSET = [offset.pop(0) * -1, offset.pop() * -1] %}
{% elif print.PRINT_OFFSET and not offset and
not printer["gcode_macro _km_save_state"].is_ephemeral %}
{% set PRINT_OFFSET = print.PRINT_OFFSET.split(",")|map('float')|list %}
{% set dummy = offset.extend(PRINT_OFFSET) %}
{% endif %}
{% if PRINT_OFFSET %}
_KM_SET_GCODE_OFFSET_BASE {"X_ADJUST=%.2f Y_ADJUST=%.2f"|
format(*PRINT_OFFSET)}
{% endif %}
[gcode_macro _km_mesh_if_needed]
gcode:
# TODO: Instead of blindly using the loaded mesh we could probe a few key
# points on the saved grid. If those probes show that the saved grid is no
# longer in tolerance we could just run BED_MESH_CALIBRATE_FAST anyway.
{% if not printer.bed_mesh.profile_name %}
BED_MESH_CALIBRATE_FAST {rawparams}
{% endif %}
[gcode_macro print_start_set]
description: Inserted by slicer to set values used by PRINT_START.
Usage: PRINT_START_SET <VARIABLE>=<value>
variable_print: {}
gcode:
{%for k in params %}
{% set dummy = print.__setitem__(k|upper, params[k]) %}
{% endfor %}
[gcode_macro _print_start_phase_check]
gcode:
{% set print = printer["gcode_macro print_start_set"].print %}
{% set PRINT_START_PHASE = print.PRINT_START_PHASE|default("none") %}
{% if PRINT_START_PHASE != params.PHASE %}
# Reset the phases manually just to be sure.
SET_GCODE_VARIABLE MACRO=print_start_set VARIABLE=print VALUE="{{}}"
{% if params.PHASE != 'none' %}
{% set error = "PRINT_START phase error. Expected '%s' but found '%s'" %
(params.PHASE, PRINT_START_PHASE) %}
# Do the cancel manually if we're not confident it will fire.
{% if not 'virtual_sdcard' in printer or
not printer.virtual_sdcard.is_active or 'CANCEL_PRINT' not in
printer.configfile.settings.virtual_sdcard.on_error_gcode|
default("")|upper %}
{action_respond_info(error)}
CANCEL_PRINT
{% else %}
{action_raise_error(error)}
{% endif %}
{% else %}
{ action_respond_info("Expected phase '%s' but found '%s'. Resetting."
% (params.PHASE, PRINT_START_PHASE)) }
{% endif %}
{% endif %}
[gcode_macro print_end]
description: Inserted by slicer at end of print.
Usage: PRINT_END
gcode:
_KM_CHECK_IS_PRINTING
M400
_PRINT_END_INNER
{% set km = printer["gcode_macro _km_globals"] %}
{% if km.start_clear_adjustments_at_end != 0 %}
RESET_HEATER_SCALING
RESET_FAN_SCALING
M220 S100
M221 S100
{% endif %}
_RESET_LAYER_GCODE
_RESET_VELOCITY_LIMITS
TURN_OFF_HEATERS
M107; turn off fan
{% if printer.bed_mesh %}BED_MESH_CLEAR{% endif %}
# Park the toolhead and present the bed
{% if printer.toolhead.homed_axes|lower == "xyz" %}
PARK Y="{km.start_end_park_y}"
{% endif %}
M84 ; disable steppers
CLEAR_PAUSE
SET_GCODE_VARIABLE MACRO=print_start_set VARIABLE=print VALUE="{{}}"
_KM_PRINT_STATUS ACTION=CHANGE STATUS=ready RESET_STACK=1
[gcode_macro _print_end_inner]
variable_cancelled: False
gcode:
SET_GCODE_VARIABLE MACRO=_print_end_inner VARIABLE=cancelled VALUE="{False}"
{% set km = printer["gcode_macro _km_globals"] %}
{% set toolhead = printer.toolhead %}
{% set origin = printer.gcode_move.homing_origin%}
{% set max_x = km.print_max[0] - origin.x %}
{% set max_y = km.print_max[1] - origin.y %}
{% set max_z = toolhead.axis_maximum.z - origin.z %}
{% if not cancelled %}
_KM_PRINT_STATUS ACTION=CHANGE STATUS=completing
{% endif %}
{% if printer.extruder.can_extrude %}
# Wipe if we're not cancelling a paused print.
{% if not printer.pause_resume.is_paused and not cancelled and
toolhead.homed_axes|lower == "xyz" %}
{% set x_safe = (max_x - toolhead.position.x, 2.0)|min %}
{% set y_safe = (max_y - toolhead.position.y, 2.0)|min %}
{% set z_safe = (max_z - toolhead.position.z, 2.0)|min %}
G91
G0 Z{z_safe} E-1.0 F{km.travel_speed_z * 2} ; move nozzle up
G0 X{x_safe} Y{y_safe} E-1.0 F{km.travel_speed_xy} ; remove stringing
# Remove the offset now that we're done.
_KM_APPLY_PRINT_OFFSET RESET=1
{% endif %}
# Small retract to prevent ooze
G92 E0
G1 E{"%.2f" % ((0, 2 - km.load_priming_length / 4)|min)} F1200
M400
{% endif %}
[gcode_macro _km_check_is_printing]
variable_debug_state: False # Disables print state check for debugging.
description: Throws an error if print is not currently in progress.
gcode:
{% if not debug_state and
printer.idle_timeout.state|string != "Printing" and
not (printer.virtual_sdcard|default({})).is_active|default(False) and
not printer.pause_resume.is_paused %}
{ action_raise_error("No active print.") }
{% endif %}
[gcode_macro _km_check_and_set_print_bounds]
description: Validates all print bounds and caches their values.
gcode:
{% set km = printer["gcode_macro _km_globals"] %}
{% set print = printer["gcode_macro print_start_set"].print %}
# Check the mesh bounds.
{% if print.MESH_MIN %}
{% set MESH_MIN = print.MESH_MIN.split(",")|map('float')|list %}
{% set MESH_MAX = print.MESH_MAX.split(",")|map('float')|list %}
{%if MESH_MIN[0] < km.print_min[0] or MESH_MIN[1] < km.print_min[1] %}
{action_raise_error("MESH_MIN %s is outside the printable bounds %s" %
(MESH_MIN|string, km.print_min|string))}
{%elif MESH_MAX[0] > km.print_max[0] or MESH_MAX[1] > km.print_max[1] %}
{action_raise_error("MESH_MAX %s is outside the printable bounds %s" %
(MESH_MAX|string, km.print_max|string))}
{% endif %}
{% endif %}
# Find all the model bounds (including any bounds passed in).
{% set points = [] %}
{% if print.MODEL_MIN or print.MODEL_MAX %}
{% set MODEL_MIN = print.MODEL_MIN.split(",")|map('float')|list %}
{% set MODEL_MAX = print.MODEL_MAX.split(",")|map('float')|list %}
{% set points = [MODEL_MIN, MODEL_MAX] %}
{% endif %}
{% if (printer.exclude_object|default({})).objects %}
{% set points = printer.exclude_object.objects|selectattr('polygon')|
map(attribute='polygon')|sum(start=points) %}
{% set points_len = points|length %}
{% if points_len >= 2 %}
{% set x_coords = (points|map(attribute=0)|sort|list)[0::points_len-1] %}
{% set y_coords = (points|map(attribute=1)|sort|list)[0::points_len-1] %}
{% set MODEL_MIN = (x_coords[0],y_coords[0])|map('float')|list %}
{% set MODEL_MAX = (x_coords[1],y_coords[1])|map('float')|list %}
PRINT_START_SET MODEL_MIN="{MODEL_MIN|join(',')
}" MODEL_MAX="{MODEL_MAX|join(',')}"
{% endif %}
{% endif %}
{% if MODEL_MIN %}
# Check the model bounds.
{% if MODEL_MIN[0] < km.print_min[0] or MODEL_MIN[1] < km.print_min[1] %}
{action_raise_error("MODEL_MIN %s is outside the printable bounds %s" %
(MODEL_MIN|string, km.print_min|string))}
{% elif MODEL_MAX[0] > km.print_max[0] or MODEL_MAX[1] > km.print_max[1] %}
{action_raise_error("MODEL_MAX %s is outside the printable bounds %s" %
(MODEL_MAX|string, km.print_max|string))}
{% endif %}
{% endif %}
# Set the PRINT_LIMITS
{% if MESH_MIN and MODEL_MIN %}
PRINT_START_SET PRINT_MIN="{((MODEL_MIN[0],MESH_MIN[0])|min,
(MODEL_MIN[1],MESH_MIN[1])|min)|join(',')
}" PRINT_MAX="{((MODEL_MAX[0],MESH_MAX[0])|max,
(MODEL_MAX[1],MESH_MAX[1])|max)|join(',')}"
{% else %}
PRINT_START_SET PRINT_MIN="{km.print_min|join(',')
}" PRINT_MAX="{km.print_max|join(',')}"
{% endif %}

42
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/state.cfg Normal file
View File

@@ -0,0 +1,42 @@
# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
[gcode_macro _km_save_state]
description: Tracks gcode state.
variable_state_set: {}
variable_is_ephemeral: 0
gcode:
{% if params.SAVE|int %}
{% set dummy = state_set.__setitem__(params.NAME, None) %}
{% else %}
{% set dummy = state_set.__delitem__(params.NAME) %}
{% endif %}
SET_GCODE_VARIABLE MACRO=_km_save_state VARIABLE=is_ephemeral VALUE="{
1 if state_set|length > 0 else 0 }"
[gcode_macro save_gcode_state]
description: Wraps SAVE_GCODE_STATE to track persistence state.
Usage: See Klipper documentation
rename_existing: _KM_SAVE_GCODE_STATE
gcode:
_KM_SAVE_GCODE_STATE {rawparams}
{% set NAME = params.NAME|default("default") %}
_km_save_state NAME={NAME} SAVE=1
[gcode_macro restore_gcode_state]
description: Wraps RESTORE_GCODE_STATE to track persistence state.
Usage: See Klipper documentation
rename_existing: _KM_RESTORE_GCODE_STATE
gcode:
_KM_RESTORE_GCODE_STATE {rawparams}
{% set NAME = params.NAME|default("default") %}
_km_save_state NAME={NAME} SAVE=0
[gcode_macro _abort_on_gcode_state]
gcode:
{% set save_state = printer["gcode_macro _km_save_state"] %}
{% if save_state.is_ephemeral %}
{action_raise_error("Encountered unexpected save state " +
save_state.state_set|list|sort|string)}
{% endif %}

152
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/status_events.cfg Normal file
View File

@@ -0,0 +1,152 @@
# Copyright (C) 2023 Justin Schuh <code@justinschuh.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
[gcode_macro _km_print_status]
variable_last_status: 'none'
variable_status_stack: []
variable_command_list: {}
variable_status_list: [
'ready', # Printer is ready to receive a job
'filament_load', # Loading filament
'filament_unload', # Unloading filament
'bed_heating', # Waiting for the bed to reach target
'chamber_heating', # Waiting for the chamber to reach target
'homing', # Homing any axis
'leveling_gantry', # Performing quad gantry-leveling
'calibrating_z', # Performing z-tilt adjustment
'meshing', # Calibrating a bed mesh
'extruder_heating', # Waiting for the extruder to reach target
'purging', # Printing purge line
'printing', # Actively printing
'pausing', # Print is paused
'cancelling', # Print is being cancelled
'completing', # Print completed
]
gcode:
{% set ACTION = params.ACTION|trim|upper %}
{% set STATUS = params.STATUS|default("")|trim|lower %}
# Add a status handler.
{% if ACTION == "ADD_EVENT" %}
{% set COMMAND = params.COMMAND %}
{% set ARGS = params.ARGS|default(0)|int != 0 %}
{% set TYPE = params.TYPE|default('ENTER')|trim|upper %}
{% set WHEN = params.WHEN|default('PRINTING')|trim|upper %}
{% set FILTER_ENTER =
(params.FILTER_ENTER|default("")|trim|lower).split(',')|
select()|unique|list %}
{% set FILTER_LEAVE =
(params.FILTER_LEAVE|default("")|trim|lower).split(',')|
select()|unique|list %}
{% set STATUSES = STATUS.split(',')|map('trim')|list %}
{% for s in (STATUSES if STATUSES[0] != 'all' else status_list) %}
{% if not s in command_list %}
{% set dummy = command_list.__setitem__(s,[]) %}
{% endif %}
{% set dummy = command_list[s].append({'cmd':COMMAND, 'args':ARGS,
'type':TYPE, 'when':WHEN,
'filt_e':FILTER_ENTER,
'filt_l':FILTER_LEAVE}) %}
{% endfor %}
# Change the current status.
{% elif ACTION == "CHANGE" %}
{% if params.RESET_STACK|default(0)|int %}
{% for dummy in range(status_stack|length) %}
{% set dummy = status_stack.pop() %}
{% endfor %}
# TODO: Once python 3 is required, switch the for loop above to this:
#{% set dummy = status_stack.clear() %}
{% elif STATUS == "pop_status" %}
{% set STATUS = (status_stack|default(['ready'], True)).pop() %}
{% endif %}
{% if STATUS not in status_list %}
{action_raise_error("Status '%s' not valid."|format(STATUS))}
{% endif %}
{% if STATUS != last_status %}
{% set is_printing =
printer["gcode_macro print_start_set"].print.PRINT_START_PHASE|
default("")|length != 0 %}
{% set print_states = ('ALWAYS', 'PRINTING' if is_printing else 'IDLE') %}
# Process commands for the state we're leaving first.
{% for c in command_list[last_status]|default([]) %}
{% if c.type in ('BOTH','LEAVE') and c.when in print_states and
(not c.filt_l or STATUS in c.filt_l) %}
M400
{c.cmd}{% if c.args %} TYPE=LEAVE WHEN={print_states[1]
} LAST_STATUS={last_status} NEXT_STATUS={STATUS}{% endif %}
{% endif %}
{% endfor %}
# Process commands for the state we're entering last.
{% for c in command_list[STATUS]|default([]) %}
{% if c.type in ('BOTH','ENTER') and c.when in print_states and
(not c.filt_e or STATUS in c.filt_e) %}
M400
{c.cmd}{% if c.args %} TYPE=ENTER WHEN={print_states[1]
} LAST_STATUS={last_status} NEXT_STATUS={STATUS}{% endif %}
{% endif %}
{% endfor %}
SET_GCODE_VARIABLE MACRO=_km_print_status VARIABLE=last_status VALUE="'{
STATUS}'"
{% endif %}
# Push the current status onto the stack.
{% elif ACTION == "PUSH_STATUS" %}
{% set dummy = status_stack.append(last_status) %}
# Illegal operation.
{% else %}
{action_raise_error("Action '%s' not valid."|format(ACTION))}
{% endif %}
[gcode_macro gcode_on_print_status]
description: Adds a gcode command for a status event.
Usage: GCODE_ON_PRINT_STATUS STATUS=<status> COMMAND=<gcode> [ARGS=<1|0>]
[WHEN=<PRINTING|IDLE|ALWAYS>]
[TYPE=<ENTER|LEAVE|BOTH>]
[FILTER_ENTER=<status list>]
[FILTER_LEAVE=<status list>]
gcode:
{% set STATUS = (params.STATUS|lower).split(',')|map('trim')|list %}
{% set TYPE = params.TYPE|default('ENTER')|trim|upper %}
{% set WHEN = params.WHEN|default('PRINTING')|trim|upper %}
{% set FILTER_ENTER =
(params.FILTER_ENTER|default("")|trim|lower).split(',')|select()|list %}
{% set FILTER_LEAVE =
(params.FILTER_LEAVE|default("")|trim|lower).split(',')|select()|list %}
# Error checking
{% set status_list = printer["gcode_macro _km_print_status"].status_list %}
{% for s in STATUS %}
{% if not (s in status_list or s == 'all' and STATUS|length == 1) %}
{action_raise_error("STATUS parameter '%s' not valid."|format(s))}
{% endif %}
{% endfor %}
{% if TYPE not in ('ENTER', 'LEAVE', 'BOTH') %}
{action_raise_error("TYPE paramater '%s' not valid."|format(TYPE))}
{% elif WHEN not in ('PRINTING', 'IDLE', 'ALWAYS') %}
{action_raise_error("WHEN parameter '%s' not valid."|format(WHEN))}
{% elif TYPE == 'ENTER' and FILTER_LEAVE %}
{action_raise_error("FILTER_LEAVE not valid with TYPE=ENTER.")}
{% elif TYPE == 'LEAVE' and FILTER_ENTER %}
{action_raise_error("FILTER_ENTER not valid with TYPE=LEAVE.")}
{% endif %}
{% for f in FILTER_ENTER %}
{% if f not in status_list %}
{action_raise_error("FILTER_ENTER parameter '%s' not valid."|format(f))}
{% endif %}
{% endfor %}
{% for f in FILTER_LEAVE %}
{% if f not in status_list %}
{action_raise_error("FILTER_LEAVE parameter '%s' not valid."|format(f))}
{% endif %}
{% endfor %}
# Run the command.
_KM_PRINT_STATUS ACTION=ADD_EVENT {rawparams}

61
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/velocity.cfg Normal file
View File

@@ -0,0 +1,61 @@
# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
[gcode_macro m201]
description: Sets maximum accelleration.
Usage: M201 [X<accel>] [Y<accel>]
variable_max_accel: 1.7976931348623157e+308
gcode:
{% set km = printer["gcode_macro _km_globals"] %}
{% if 'X' in params or 'Y' in params %}
{% set accel = (params.X|default(params.Y)|float,
params.Y|default(params.X)|float)|min %}
SET_GCODE_VARIABLE MACRO=m201 VARIABLE=max_accel VALUE="{accel}"
{% else %}
SET_VELOCITY_LIMIT
{% endif %}
[gcode_macro m203]
description: Sets maximum velocity.
Usage: M203 [X<velocity>] [Y<velocity>]
gcode:
{% if 'X' in params or 'Y' in params %}
{% set velocity = (params.X|default(params.Y)|float,
params.Y|default(params.X)|float)|min %}
SET_VELOCITY_LIMIT VELOCITY="{velocity}"
{% else %}
SET_VELOCITY_LIMIT
{% endif %}
[gcode_macro m205]
description: Sets square corner velocity.
Usage: M203 [X<velocity>] [Y<velocity>]
gcode:
{% if 'X' in params or 'Y' in params %}
SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY="{
(params.X|default(0)|float, params.Y|default(0)|float)|min}"
{% else %}
SET_VELOCITY_LIMIT
{% endif %}
[gcode_macro m900]
description: Sets pressure advance.
Usage: M900 [K<advance>] [T<extruder_index>]
gcode:
{% set km = printer["gcode_macro _km_globals"] %}
{% if km.pressure_advance_scale > 0.0 %}
{% set extruder = "extruder" ~ params.T|replace('0', '')
if "T" in params else printer.toolhead.extruder %}
{% if 'K' in params %}
SET_PRESSURE_ADVANCE EXTRUDER="{extruder}" ADVANCE="{
params.K|float * km.pressure_advance_scale}"
{% endif %}
{% endif %}
[gcode_macro _reset_velocity_limits]
description: Sets maximum accelleration.
Usage: M204 [S<accel>] [P<accel> T<accel>]
gcode:
SET_GCODE_VARIABLE MACRO=m201 VARIABLE=max_accel VALUE="{1.7976931348623157e+308}"

674
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-oud/LICENSE Normal file
View File

@@ -0,0 +1,674 @@
GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The GNU General Public License is a free, copyleft license for
software and other kinds of works.
The licenses for most software and other practical works are designed
to take away your freedom to share and change the works. By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users. We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors. You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.
To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights. Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received. You must make sure that they, too, receive
or can get the source code. And you must show them these terms so they
know their rights.
Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.
For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software. For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.
Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so. This is fundamentally incompatible with the aim of
protecting users' freedom to change the software. The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable. Therefore, we
have designed this version of the GPL to prohibit the practice for those
products. If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.
Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary. To prevent this, the GPL assures that
patents cannot be used to render the program non-free.
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS
0. Definitions.
"This License" refers to version 3 of the GNU General Public License.
"Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.
"The Program" refers to any copyrightable work licensed under this
License. Each licensee is addressed as "you". "Licensees" and
"recipients" may be individuals or organizations.
To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy. The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.
A "covered work" means either the unmodified Program or a work based
on the Program.
To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy. Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.
To "convey" a work means any kind of propagation that enables other
parties to make or receive copies. Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.
An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License. If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.
1. Source Code.
The "source code" for a work means the preferred form of the work
for making modifications to it. "Object code" means any non-source
form of a work.
A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.
The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form. A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.
The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities. However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work. For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.
The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.
The Corresponding Source for a work in source code form is that
same work.
2. Basic Permissions.
All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met. This License explicitly affirms your unlimited
permission to run the unmodified Program. The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work. This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.
You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force. You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright. Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.
Conveying under any other circumstances is permitted solely under
the conditions stated below. Sublicensing is not allowed; section 10
makes it unnecessary.
3. Protecting Users' Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.
When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.
You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:
a) The work must carry prominent notices stating that you modified
it, and giving a relevant date.
b) The work must carry prominent notices stating that it is
released under this License and any conditions added under section
7. This requirement modifies the requirement in section 4 to
"keep intact all notices".
c) You must license the entire work, as a whole, under this
License to anyone who comes into possession of a copy. This
License will therefore apply, along with any applicable section 7
additional terms, to the whole of the work, and all its parts,
regardless of how they are packaged. This License gives no
permission to license the work in any other way, but it does not
invalidate such permission if you have separately received it.
d) If the work has interactive user interfaces, each must display
Appropriate Legal Notices; however, if the Program has interactive
interfaces that do not display Appropriate Legal Notices, your
work need not make them do so.
A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit. Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:
a) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by the
Corresponding Source fixed on a durable physical medium
customarily used for software interchange.
b) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by a
written offer, valid for at least three years and valid for as
long as you offer spare parts or customer support for that product
model, to give anyone who possesses the object code either (1) a
copy of the Corresponding Source for all the software in the
product that is covered by this License, on a durable physical
medium customarily used for software interchange, for a price no
more than your reasonable cost of physically performing this
conveying of source, or (2) access to copy the
Corresponding Source from a network server at no charge.
c) Convey individual copies of the object code with a copy of the
written offer to provide the Corresponding Source. This
alternative is allowed only occasionally and noncommercially, and
only if you received the object code with such an offer, in accord
with subsection 6b.
d) Convey the object code by offering access from a designated
place (gratis or for a charge), and offer equivalent access to the
Corresponding Source in the same way through the same place at no
further charge. You need not require recipients to copy the
Corresponding Source along with the object code. If the place to
copy the object code is a network server, the Corresponding Source
may be on a different server (operated by you or a third party)
that supports equivalent copying facilities, provided you maintain
clear directions next to the object code saying where to find the
Corresponding Source. Regardless of what server hosts the
Corresponding Source, you remain obligated to ensure that it is
available for as long as needed to satisfy these requirements.
e) Convey the object code using peer-to-peer transmission, provided
you inform other peers where the object code and Corresponding
Source of the work are being offered to the general public at no
charge under subsection 6d.
A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.
A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling. In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage. For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product. A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.
"Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source. The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.
If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information. But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).
The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed. Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.
Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.
7. Additional Terms.
"Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law. If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.
When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it. (Additional permissions may be written to require their own
removal in certain cases when you modify the work.) You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.
Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:
a) Disclaiming warranty or limiting liability differently from the
terms of sections 15 and 16 of this License; or
b) Requiring preservation of specified reasonable legal notices or
author attributions in that material or in the Appropriate Legal
Notices displayed by works containing it; or
c) Prohibiting misrepresentation of the origin of that material, or
requiring that modified versions of such material be marked in
reasonable ways as different from the original version; or
d) Limiting the use for publicity purposes of names of licensors or
authors of the material; or
e) Declining to grant rights under trademark law for use of some
trade names, trademarks, or service marks; or
f) Requiring indemnification of licensors and authors of that
material by anyone who conveys the material (or modified versions of
it) with contractual assumptions of liability to the recipient, for
any liability that these contractual assumptions directly impose on
those licensors and authors.
All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10. If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term. If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.
If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.
8. Termination.
You may not propagate or modify a covered work except as expressly
provided under this License. Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).
However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.
Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License. If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or
run a copy of the Program. Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance. However,
nothing other than this License grants you permission to propagate or
modify any covered work. These actions infringe copyright if you do
not accept this License. Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License. You are not responsible
for enforcing compliance by third parties with this License.
An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations. If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.
You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License. For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.
11. Patents.
A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based. The
work thus licensed is called the contributor's "contributor version".
A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version. For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.
In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement). To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.
If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients. "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.
If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.
A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License. You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all. For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.
13. Use with the GNU Affero General Public License.
Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work. The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation. If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.
If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.
Later license versions may give you additional or different
permissions. However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.
Also add information on how to contact you by electronic and paper mail.
If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:
<program> Copyright (C) <year> <name of author>
This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, your program's commands
might be different; for a GUI interface, you would use an "about box".
You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
<https://www.gnu.org/licenses/>.
The GNU General Public License does not permit incorporating your program
into proprietary programs. If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications with
the library. If this is what you want to do, use the GNU Lesser General
Public License instead of this License. But first, please read
<https://www.gnu.org/licenses/why-not-lgpl.html>.

0
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/README.md → klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-oud/README.md
View File

0
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/bed_mesh_fast.cfg → klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-oud/bed_mesh_fast.cfg
View File

0
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/bed_surface.cfg → klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-oud/bed_surface.cfg
View File

0
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/beep.cfg → klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-oud/beep.cfg
View File

0
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/draw.cfg → klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-oud/draw.cfg
View File

0
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/fans.cfg → klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-oud/fans.cfg
View File

0
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/filament.cfg → klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-oud/filament.cfg
View File

0
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/globals.cfg → klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-oud/globals.cfg
View File

0
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/heaters.cfg → klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-oud/heaters.cfg
View File

0
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/idle.cfg → klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-oud/idle.cfg
View File

0
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/kinematics.cfg → klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-oud/kinematics.cfg
View File

0
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/layers.cfg → klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-oud/layers.cfg
View File

0
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/optional/bed_mesh.cfg → klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-oud/optional/bed_mesh.cfg
View File

0
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/optional/lcd_menus.cfg → klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-oud/optional/lcd_menus.cfg
View File

0
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/park.cfg → klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-oud/park.cfg
View File

0
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/pause_resume_cancel.cfg → klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-oud/pause_resume_cancel.cfg
View File

0
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/start_end.cfg → klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-oud/start_end.cfg
View File

0
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/state.cfg → klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-oud/state.cfg
View File

0
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/velocity.cfg → klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-oud/velocity.cfg
View File

BIN
klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/.kinematics.cfg.swp
View File

Binary file not shown.

16
klipper/DNV-TPU-Ender3/klipper_config/macros/jschuh_macros.cfg
View File

@@ -5,14 +5,14 @@
# These are examples of some likely customizations: # These are examples of some likely customizations:
# Any sheets in the below list will be available with a configurable offset. # Any sheets in the below list will be available with a configurable offset.
#variable_bed_surfaces: ['smooth_1','texture_1'] #variable_bed_surfaces: ['smooth_1','texture_1']
variable_print_min: (12, 30) # example: (0, 0) variable_print_min: (12, 51) # example: (0, 0)
variable_start_bed_heat_overshoot: 0.0 variable_start_bed_heat_overshoot: 0.0
variable_park_x: 5.0 variable_park_x: 5.0
variable_park_y: 5.0 variable_park_y: 5.0
# Length (in mm) of filament to load (bowden tubes will be longer). # Length (in mm) of filament to load (bowden tubes will be longer).
variable_load_length: 50.0 variable_load_length: 50.0
# Hide the Octoprint LCD menu since I don't use it. # Hide the Octoprint LCD menu since I don't use it.
#variable_menu_show_octoprint: False variable_menu_show_octoprint: False
# Customize the filament menus (up to 10 entries). # Customize the filament menus (up to 10 entries).
variable_menu_temperature: [ variable_menu_temperature: [
{'name' : 'TPU', 'extruder' : 220.0, 'bed' : 45.0}, {'name' : 'TPU', 'extruder' : 220.0, 'bed' : 45.0},
@@ -20,22 +20,22 @@ variable_menu_temperature: [
{'name' : 'PETG', 'extruder' : 230.0, 'bed' : 85.0}, {'name' : 'PETG', 'extruder' : 230.0, 'bed' : 85.0},
{'name' : 'ABS', 'extruder' : 245.0, 'bed' : 110.0, 'chamber' : 60}] {'name' : 'ABS', 'extruder' : 245.0, 'bed' : 110.0, 'chamber' : 60}]
# Length of filament (in millimeters) to purge at print start. # Length of filament (in millimeters) to purge at print start.
#variable_start_purge_length: 30 # This value works for most setups. variable_start_purge_length: 30 # This value works for most setups.
gcode: # This line is required by Klipper. gcode: # This line is required by Klipper.
# Any code you put here will run at klipper startup, after the initialization # Any code you put here will run at klipper startup, after the initialization
# for these macros. For example, you could uncomment the following line to # for these macros. For example, you could uncomment the following line to
# automatically adjust your bed surface offsets to account for any changes made # automatically adjust your bed surface offsets to account for any changes made
# to your Z endstop or probe offset. # to your Z endstop or probe offset.
# ADJUST_SURFACE_OFFSETS # ADJUST_SURFACE_OFFSETS
M118 Einde gcode_macro _km_options M118 Einde gcode_macro _km_options
# This line includes all the standard macros. # This line includes all the standard macros.
[include ../klipper-macros/*.cfg] [include ../klipper-macros-main/*.cfg]
# Uncomment to include features that require specific hardware support. # Uncomment to include features that require specific hardware support.
# LCD menu support for features like bed surface selection and pause next layer. # LCD menu support for features like bed surface selection and pause next layer.
[include ../klipper-macros/optional/lcd_menus.cfg] [include ../klipper-macros-main/optional/lcd_menus.cfg]
# Optimized bed leveling # Optimized bed leveling
[include ../klipper-macros/optional/bed_mesh.cfg] [include ../klipper-macros-main/optional/bed_mesh.cfg]
# The sections below here are required for the macros to work. If your config # The sections below here are required for the macros to work. If your config
# already has some of these sections you should merge the duplicates into one # already has some of these sections you should merge the duplicates into one
@@ -55,7 +55,7 @@ filename: ~/printer_data/variables.cfg # UPDATE THIS FOR YOUR PATH!!!
#[virtual_sdcard] #[virtual_sdcard]
#path: ~/gcode_files # UPDATE THIS FOR YOUR PATH!!! #path: ~/gcode_files # UPDATE THIS FOR YOUR PATH!!!
[display_status] #[display_status]
# Uncomment the sections below if Fluidd complains (because it's confused). # Uncomment the sections below if Fluidd complains (because it's confused).
[gcode_macro CANCEL_PRINT] [gcode_macro CANCEL_PRINT]

907
klipper/DNV-TPU-Ender3/klipper_config/printer-20220104_172505.cfg
View File

@@ -1,907 +0,0 @@
# This file contains common pin mappings for the BIGTREETECH SKR mini
# E3 v1.2. To use this config, the firmware should be compiled for the
# STM32F103 with a "28KiB bootloader" and USB communication. Also,
# select "Enable extra low-level configuration options" and configure
# "GPIO pins to set at micro-controller startup" to "!PC13".
# The "make flash" command does not work on the SKR mini E3. Instead,
# after running "make", copy the generated "out/klipper.bin" file to a
# file named "firmware.bin" on an SD card and then restart the SKR
# mini E3 with that SD card.
# See docs/Config_Reference.md for a description of parameters.
# Note: This board has a design flaw in its thermistor circuits that
# cause inaccurate temperatures (most noticeable at low temperatures).
[stepper_x]
step_pin: PB13
dir_pin: !PB12
enable_pin: !PB14
microsteps: 16
rotation_distance: 40
endstop_pin: ^PC0
position_endstop: 0
position_max: 235
homing_speed: 50
[tmc2209 stepper_x]
uart_pin: PB15
run_current: 0.580
stealthchop_threshold: 999999
[stepper_y]
step_pin: PB10
dir_pin: !PB2
enable_pin: !PB11
microsteps: 16
rotation_distance: 40
endstop_pin: ^PC1
position_endstop: 0
position_max: 235
homing_speed: 50
[tmc2209 stepper_y]
uart_pin: PC6
run_current: 0.580
stealthchop_threshold: 999999
[stepper_z]
step_pin: PB0
dir_pin: PC5
enable_pin: !PB1
microsteps: 16
rotation_distance: 8
endstop_pin: ^PC2
position_endstop: 0.0
position_max: 250
[tmc2209 stepper_z]
uart_pin: PC10
run_current: 0.580
stealthchop_threshold: 999999
[bltouch]
sensor_pin: ^PC14 ;mine uses the Z pin for sensor
control_pin: PA1
pin_up_reports_not_triggered: False
pin_up_touch_mode_reports_triggered: False
x_offset: 32.4
y_offset: -34.9
z_offset: 1.6
pin_move_time: 1.5
[extruder]
# DropEffect OmniaDrop V2.1
step_pin: PB3
dir_pin: !PB4
enable_pin: !PD2
microsteps: 16
gear_ratio: 5:1
rotation_distance: 33.500
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PC8
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PA0
control: pid
pid_Kp: 21.527
pid_Ki: 1.063
pid_Kd: 108.982
min_temp: 0
max_temp: 285
[tmc2209 extruder]
uart_pin: PC11
run_current: 0.500
stealthchop_threshold: 999999
[heater_bed]
heater_pin: PC9
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC3
control: pid
pid_Kp: 54.027
pid_Ki: 0.770
pid_Kd: 948.182
min_temp: 0
max_temp: 130
[fan]
pin: PA8
[mcu]
serial: /dev/serial/by-id/usb-Klipper_stm32f103xe_32FFDA054158323011792557-if00
[printer]
kinematics: cartesian
max_velocity: 300
max_accel: 3000
max_z_velocity: 5
max_z_accel: 100
[static_digital_output usb_pullup_enable]
pins: !PC13
[board_pins]
aliases:
# EXP1 header
EXP1_1=PB5, EXP1_3=PA9, EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9, EXP1_8=PB7, EXP1_10=<5V>
# See the sample-lcd.cfg file for definitions of common LCD displays.
[display]
lcd_type: st7920
cs_pin: EXP1_7
sclk_pin: EXP1_6
sid_pin: EXP1_8
encoder_pins: ^EXP1_5, ^EXP1_3
click_pin: ^!EXP1_2
[output_pin beeper]
pin: EXP1_1
[virtual_sdcard]
path: ~/gcode_files
[display_status]
[pause_resume]
[gcode_macro PAUSE]
description: Pause the actual running print
rename_existing: PAUSE_BASE
# change this if you need more or less extrusion
variable_extrude: 1.0
gcode:
##### read E from pause macro #####
{% set E = printer["gcode_macro PAUSE"].extrude|float %}
##### set park positon for x and y #####
# default is your max posion from your printer.cfg
{% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
{% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
##### calculate save lift position #####
{% set max_z = printer.toolhead.axis_maximum.z|float %}
{% set act_z = printer.toolhead.position.z|float %}
{% if act_z < (max_z - 2.0) %}
{% set z_safe = 2.0 %}
{% else %}
{% set z_safe = max_z - act_z %}
{% endif %}
##### end of definitions #####
PAUSE_BASE
G91
{% if printer.extruder.can_extrude|lower == 'true' %}
G1 E-{E} F2100
{% else %}
{action_respond_info("Extruder not hot enough")}
{% endif %}
{% if "xyz" in printer.toolhead.homed_axes %}
G1 Z{z_safe} F900
G90
G1 X{x_park} Y{y_park} F6000
{% else %}
{action_respond_info("Printer not homed")}
{% endif %}
[gcode_macro RESUME]
description: Resume the actual running print
rename_existing: RESUME_BASE
gcode:
##### read E from pause macro #####
{% set E = printer["gcode_macro PAUSE"].extrude|float %}
#### get VELOCITY parameter if specified ####
{% if 'VELOCITY' in params|upper %}
{% set get_params = ('VELOCITY=' + params.VELOCITY) %}
{%else %}
{% set get_params = "" %}
{% endif %}
##### end of definitions #####
{% if printer.extruder.can_extrude|lower == 'true' %}
G91
G1 E{E} F2100
{% else %}
{action_respond_info("Extruder not hot enough")}
{% endif %}
RESUME_BASE {get_params}
[gcode_macro CANCEL_PRINT]
description: Cancel the actual running print
rename_existing: CANCEL_PRINT_BASE
gcode:
TURN_OFF_HEATERS
CANCEL_PRINT_BASE
# The print bed can move so far to the front, that the nozzle can reach the
# plastic cover of the print bed heater cable (only when the bed is moved by
# hand). By homing the Y axis before the X axis, it is ensured the nozzle will
# not melt through the plastic part.
# BEWARE: You will lose the ability to home axes individually. The printer will
# always home all axes for every G28 command.
#[homing_override]
#gcode:
# G28 Y0
# G28 X0
# G28 Z0
[bed_screws]
screw1: 32,32
screw2: 203,32
screw3: 203,203
screw4: 32,203
screw5: 117,117
### menu main ###
[menu __main]
type: list
name: Main
### menu tune ###
[menu __main __tune]
type: list
enable: {printer.idle_timeout.state == "Printing"}
name: Tune
[menu __main __tune __speed]
type: input
name: Speed: {'%3d' % (menu.input*100)}%
input: {printer.gcode_move.speed_factor}
input_min: 0.01
input_max: 5
input_step: 0.01
realtime: True
gcode:
M220 S{'%d' % (menu.input*100)}
[menu __main __tune __flow]
type: input
name: Flow: {'%3d' % (menu.input*100)}%
input: {printer.gcode_move.extrude_factor}
input_min: 0.01
input_max: 2
input_step: 0.01
realtime: True
gcode:
M221 S{'%d' % (menu.input*100)}
[menu __main __tune __offsetz]
type: input
name: Offset Z:{'%05.3f' % menu.input}
input: {printer.gcode_move.homing_origin.z}
input_min: -5
input_max: 5
input_step: 0.005
realtime: True
gcode:
SET_GCODE_OFFSET Z={'%.3f' % menu.input} MOVE=1
### menu octoprint ###
[menu __main __octoprint]
type: list
name: OctoPrint
[menu __main __octoprint __pause]
type: command
enable: {printer.idle_timeout.state == "Printing"}
name: Pause printing
gcode:
{action_respond_info('action:pause')}
[menu __main __octoprint __resume]
type: command
enable: {not printer.idle_timeout.state == "Printing"}
name: Resume printing
gcode:
{action_respond_info('action:resume')}
[menu __main __octoprint __abort]
type: command
enable: {printer.idle_timeout.state == "Printing"}
name: Abort printing
gcode:
{action_respond_info('action:cancel')}
### menu virtual sdcard ###
[menu __main __sdcard]
type: vsdlist
enable: {('virtual_sdcard' in printer)}
name: SD Card
[menu __main __sdcard __start]
type: command
enable: {('virtual_sdcard' in printer) and printer.virtual_sdcard.file_path and not printer.virtual_sdcard.is_active}
name: Start printing
gcode: M24
[menu __main __sdcard __resume]
type: command
enable: {('virtual_sdcard' in printer) and printer.print_stats.state == "paused"}
name: Resume printing
gcode:
{% if "pause_resume" in printer %}
RESUME
{% else %}
M24
{% endif %}
[menu __main __sdcard __pause]
type: command
enable: {('virtual_sdcard' in printer) and printer.print_stats.state == "printing"}
name: Pause printing
gcode:
{% if "pause_resume" in printer %}
PAUSE
{% else %}
M25
{% endif %}
[menu __main __sdcard __cancel]
type: command
enable: {('virtual_sdcard' in printer) and (printer.print_stats.state == "printing" or printer.print_stats.state == "paused")}
name: Cancel printing
gcode:
{% if 'pause_resume' in printer %}
CANCEL_PRINT
{% else %}
M25
M27
M26 S0
TURN_OFF_HEATERS
{% if printer.toolhead.position.z <= printer.toolhead.axis_maximum.z - 5 %}
G91
G0 Z5 F1000
G90
{% endif %}
{% endif %}
### menu control ###
[menu __main __control]
type: list
name: Control
[menu __main __control __home]
type: command
enable: {not printer.idle_timeout.state == "Printing"}
name: Home All
gcode: G28
[menu __main __control __homez]
type: command
enable: {not printer.idle_timeout.state == "Printing"}
name: Home Z
gcode: G28 Z
[menu __main __control __homexy]
type: command
enable: {not printer.idle_timeout.state == "Printing"}
name: Home X/Y
gcode: G28 X Y
[menu __main __control __disable]
type: command
name: Steppers off
gcode:
M84
M18
[menu __main __control __fanonoff]
type: input
enable: {'fan' in printer}
name: Fan: {'ON ' if menu.input else 'OFF'}
input: {printer.fan.speed}
input_min: 0
input_max: 1
input_step: 1
gcode:
M106 S{255 if menu.input else 0}
[menu __main __control __fanspeed]
type: input
enable: {'fan' in printer}
name: Fan speed: {'%3d' % (menu.input*100)}%
input: {printer.fan.speed}
input_min: 0
input_max: 1
input_step: 0.01
gcode:
M106 S{'%d' % (menu.input*255)}
[menu __main __control __caselightonoff]
type: input
enable: {'output_pin caselight' in printer}
name: Lights: {'ON ' if menu.input else 'OFF'}
input: {printer['output_pin caselight'].value}
input_min: 0
input_max: 1
input_step: 1
gcode:
SET_PIN PIN=caselight VALUE={1 if menu.input else 0}
[menu __main __control __caselightpwm]
type: input
enable: {'output_pin caselight' in printer}
name: Lights: {'%3d' % (menu.input*100)}%
input: {printer['output_pin caselight'].value}
input_min: 0.0
input_max: 1.0
input_step: 0.01
gcode:
SET_PIN PIN=caselight VALUE={menu.input}
### menu move 10mm ###
[menu __main __control __move_10mm]
type: list
enable: {not printer.idle_timeout.state == "Printing"}
name: Move 10mm
[menu __main __control __move_10mm __axis_x]
type: input
name: Move X:{'%05.1f' % menu.input}
input: {printer.gcode_move.gcode_position.x}
input_min: {printer.toolhead.axis_minimum.x}
input_max: {printer.toolhead.axis_maximum.x}
input_step: 10.0
gcode:
SAVE_GCODE_STATE NAME=__move__axis
G90
G1 X{menu.input}
RESTORE_GCODE_STATE NAME=__move__axis
[menu __main __control __move_10mm __axis_y]
type: input
name: Move Y:{'%05.1f' % menu.input}
input: {printer.gcode_move.gcode_position.y}
input_min: {printer.toolhead.axis_minimum.y}
input_max: {printer.toolhead.axis_maximum.y}
input_step: 10.0
gcode:
SAVE_GCODE_STATE NAME=__move__axis
G90
G1 Y{menu.input}
RESTORE_GCODE_STATE NAME=__move__axis
[menu __main __control __move_10mm __axis_z]
type: input
enable: {not printer.idle_timeout.state == "Printing"}
name: Move Z:{'%05.1f' % menu.input}
input: {printer.gcode_move.gcode_position.z}
input_min: 0
input_max: {printer.toolhead.axis_maximum.z}
input_step: 10.0
gcode:
SAVE_GCODE_STATE NAME=__move__axis
G90
G1 Z{menu.input}
RESTORE_GCODE_STATE NAME=__move__axis
[menu __main __control __move_10mm __axis_e]
type: input
enable: {not printer.idle_timeout.state == "Printing"}
name: Move E:{'%+06.1f' % menu.input}
input: 0
input_min: -{printer.configfile.config.extruder.max_extrude_only_distance|default(50)}
input_max: {printer.configfile.config.extruder.max_extrude_only_distance|default(50)}
input_step: 10.0
gcode:
SAVE_GCODE_STATE NAME=__move__axis
M83
G1 E{menu.input} F240
RESTORE_GCODE_STATE NAME=__move__axis
### menu move 1mm ###
[menu __main __control __move_1mm]
type: list
enable: {not printer.idle_timeout.state == "Printing"}
name: Move 1mm
[menu __main __control __move_1mm __axis_x]
type: input
name: Move X:{'%05.1f' % menu.input}
input: {printer.gcode_move.gcode_position.x}
input_min: {printer.toolhead.axis_minimum.x}
input_max: {printer.toolhead.axis_maximum.x}
input_step: 1.0
gcode:
SAVE_GCODE_STATE NAME=__move__axis
G90
G1 X{menu.input}
RESTORE_GCODE_STATE NAME=__move__axis
[menu __main __control __move_1mm __axis_y]
type: input
name: Move Y:{'%05.1f' % menu.input}
input: {printer.gcode_move.gcode_position.y}
input_min: {printer.toolhead.axis_minimum.y}
input_max: {printer.toolhead.axis_maximum.y}
input_step: 1.0
gcode:
SAVE_GCODE_STATE NAME=__move__axis
G90
G1 Y{menu.input}
RESTORE_GCODE_STATE NAME=__move__axis
[menu __main __control __move_1mm __axis_z]
type: input
enable: {not printer.idle_timeout.state == "Printing"}
name: Move Z:{'%05.1f' % menu.input}
input: {printer.gcode_move.gcode_position.z}
input_min: 0
input_max: {printer.toolhead.axis_maximum.z}
input_step: 1.0
gcode:
SAVE_GCODE_STATE NAME=__move__axis
G90
G1 Z{menu.input}
RESTORE_GCODE_STATE NAME=__move__axis
[menu __main __control __move_1mm __axis_e]
type: input
enable: {not printer.idle_timeout.state == "Printing"}
name: Move E:{'%+06.1f' % menu.input}
input: 0
input_min: -{printer.configfile.config.extruder.max_extrude_only_distance|default(50)}
input_max: {printer.configfile.config.extruder.max_extrude_only_distance|default(50)}
input_step: 1.0
gcode:
SAVE_GCODE_STATE NAME=__move__axis
M83
G1 E{menu.input} F240
RESTORE_GCODE_STATE NAME=__move__axis
### menu move 0.1mm ###
[menu __main __control __move_01mm]
type: list
enable: {not printer.idle_timeout.state == "Printing"}
name: Move 0.1mm
[menu __main __control __move_01mm __axis_x]
type: input
name: Move X:{'%05.1f' % menu.input}
input: {printer.gcode_move.gcode_position.x}
input_min: {printer.toolhead.axis_minimum.x}
input_max: {printer.toolhead.axis_maximum.x}
input_step: 0.1
gcode:
SAVE_GCODE_STATE NAME=__move__axis
G90
G1 X{menu.input}
RESTORE_GCODE_STATE NAME=__move__axis
[menu __main __control __move_01mm __axis_y]
type: input
name: Move Y:{'%05.1f' % menu.input}
input: {printer.gcode_move.gcode_position.y}
input_min: {printer.toolhead.axis_minimum.y}
input_max: {printer.toolhead.axis_maximum.y}
input_step: 0.1
gcode:
SAVE_GCODE_STATE NAME=__move__axis
G90
G1 Y{menu.input}
RESTORE_GCODE_STATE NAME=__move__axis
[menu __main __control __move_01mm __axis_z]
type: input
enable: {not printer.idle_timeout.state == "Printing"}
name: Move Z:{'%05.1f' % menu.input}
input: {printer.gcode_move.gcode_position.z}
input_min: 0
input_max: {printer.toolhead.axis_maximum.z}
input_step: 0.1
gcode:
SAVE_GCODE_STATE NAME=__move__axis
G90
G1 Z{menu.input}
RESTORE_GCODE_STATE NAME=__move__axis
[menu __main __control __move_01mm __axis_e]
type: input
enable: {not printer.idle_timeout.state == "Printing"}
name: Move E:{'%+06.1f' % menu.input}
input: 0
input_min: -{printer.configfile.config.extruder.max_extrude_only_distance|default(50)}
input_max: {printer.configfile.config.extruder.max_extrude_only_distance|default(50)}
input_step: 0.1
gcode:
SAVE_GCODE_STATE NAME=__move__axis
M83
G1 E{menu.input} F240
RESTORE_GCODE_STATE NAME=__move__axis
### menu temperature ###
[menu __main __temp]
type: list
name: Temperature
[menu __main __temp __hotend0_target]
type: input
enable: {('extruder' in printer) and ('extruder' in printer.heaters.available_heaters)}
name: {"Ex0:%3.0f (%4.0f)" % (menu.input, printer.extruder.temperature)}
input: {printer.extruder.target}
input_min: 0
input_max: {printer.configfile.config.extruder.max_temp}
input_step: 1
gcode: M104 T0 S{'%.0f' % menu.input}
[menu __main __temp __hotend1_target]
type: input
enable: {('extruder1' in printer) and ('extruder1' in printer.heaters.available_heaters)}
name: {"Ex1:%3.0f (%4.0f)" % (menu.input, printer.extruder1.temperature)}
input: {printer.extruder1.target}
input_min: 0
input_max: {printer.configfile.config.extruder1.max_temp}
input_step: 1
gcode: M104 T1 S{'%.0f' % menu.input}
[menu __main __temp __hotbed_target]
type: input
enable: {'heater_bed' in printer}
name: {"Bed:%3.0f (%4.0f)" % (menu.input, printer.heater_bed.temperature)}
input: {printer.heater_bed.target}
input_min: 0
input_max: {printer.configfile.config.heater_bed.max_temp}
input_step: 1
gcode: M140 S{'%.0f' % menu.input}
[menu __main __temp __preheat_pla]
type: list
name: Preheat PLA
[menu __main __temp __preheat_pla __all]
type: command
enable: {('extruder' in printer) and ('heater_bed' in printer)}
name: Preheat all
gcode:
M140 S60
M104 S200
[menu __main __temp __preheat_pla __hotend]
type: command
enable: {'extruder' in printer}
name: Preheat hotend
gcode: M104 S200
[menu __main __temp __preheat_pla __hotbed]
type: command
enable: {'heater_bed' in printer}
name: Preheat hotbed
gcode: M140 S60
[menu __main __temp __preheat_abs]
type: list
name: Preheat ABS
[menu __main __temp __preheat_abs __all]
type: command
enable: {('extruder' in printer) and ('heater_bed' in printer)}
name: Preheat all
gcode:
M140 S110
M104 S245
[menu __main __temp __preheat_abs __hotend]
type: command
enable: {'extruder' in printer}
name: Preheat hotend
gcode: M104 S245
[menu __main __temp __preheat_abs __hotbed]
type: command
enable: {'heater_bed' in printer}
name: Preheat hotbed
gcode: M140 S110
[menu __main __temp __cooldown]
type: list
name: Cooldown
[menu __main __temp __cooldown __all]
type: command
enable: {('extruder' in printer) and ('heater_bed' in printer)}
name: Cooldown all
gcode:
M104 S0
M140 S0
[menu __main __temp __cooldown __hotend]
type: command
enable: {'extruder' in printer}
name: Cooldown hotend
gcode: M104 S0
[menu __main __temp __cooldown __hotbed]
type: command
enable: {'heater_bed' in printer}
name: Cooldown hotbed
gcode: M140 S0
### menu filament ###
[menu __main __filament]
type: list
name: Filament
[menu __main __filament __hotend0_target]
type: input
enable: {'extruder' in printer}
name: {"Ex0:%3.0f (%4.0f)" % (menu.input, printer.extruder.temperature)}
input: {printer.extruder.target}
input_min: 0
input_max: {printer.configfile.config.extruder.max_temp}
input_step: 1
gcode: M104 T0 S{'%.0f' % menu.input}
[menu __main __filament __loadf]
type: command
name: Load Fil. fast
gcode:
SAVE_GCODE_STATE NAME=__filament__load
M83
G1 E50 F960
RESTORE_GCODE_STATE NAME=__filament__load
[menu __main __filament __loads]
type: command
name: Load Fil. slow
gcode:
SAVE_GCODE_STATE NAME=__filament__load
M83
G1 E50 F240
RESTORE_GCODE_STATE NAME=__filament__load
[menu __main __filament __unloadf]
type: command
name: Unload Fil.fast
gcode:
SAVE_GCODE_STATE NAME=__filament__load
M83
G1 E-50 F960
RESTORE_GCODE_STATE NAME=__filament__load
[menu __main __filament __unloads]
type: command
name: Unload Fil.slow
gcode:
SAVE_GCODE_STATE NAME=__filament__load
M83
G1 E-50 F240
RESTORE_GCODE_STATE NAME=__filament__load
[menu __main __filament __feed]
type: input
name: Feed: {'%.1f' % menu.input}
input: 5
input_step: 0.1
gcode:
SAVE_GCODE_STATE NAME=__filament__load
M83
G1 E{'%.1f' % menu.input} F60
RESTORE_GCODE_STATE NAME=__filament__load
### menu setup ###
[menu __main __setup]
type: list
enable: {not printer.idle_timeout.state == "Printing"}
name: Setup
[menu __main __setup __save_config]
type: command
name: Save config
gcode: SAVE_CONFIG
[menu __main __setup __restart]
type: list
name: Restart
[menu __main __setup __restart __host_restart]
type: command
enable: {not printer.idle_timeout.state == "Printing"}
name: Restart host
gcode: RESTART
[menu __main __setup __restart __firmware_restart]
type: command
enable: {not printer.idle_timeout.state == "Printing"}
name: Restart FW
gcode: FIRMWARE_RESTART
[menu __main __setup __tuning]
type: list
name: PID tuning
[menu __main __setup __tuning __hotend_pid_tuning]
type: command
enable: {(not printer.idle_timeout.state == "Printing") and ('extruder' in printer)}
name: Tune Hotend PID
gcode: PID_CALIBRATE HEATER=extruder TARGET=210 WRITE_FILE=1
[menu __main __setup __tuning __hotbed_pid_tuning]
type: command
enable: {(not printer.idle_timeout.state == "Printing") and ('heater_bed' in printer)}
name: Tune Hotbed PID
gcode: PID_CALIBRATE HEATER=heater_bed TARGET=60 WRITE_FILE=1
[menu __main __setup __calib]
type: list
name: Calibration
[menu __main __setup __calib __delta_calib_auto]
type: command
enable: {not printer.idle_timeout.state == "Printing"}
name: Delta cal. auto
gcode:
G28
DELTA_CALIBRATE
[menu __main __setup __calib __delta_calib_man]
type: list
enable: {not printer.idle_timeout.state == "Printing"}
name: Delta cal. man
[menu __main __setup __calib __bedprobe]
type: command
enable: {not printer.idle_timeout.state == "Printing"}
name: Bed probe
gcode: PROBE
[menu __main __setup __calib __delta_calib_man __start]
type: command
name: Start probing
gcode:
G28
DELTA_CALIBRATE METHOD=manual
[menu __main __setup __calib __delta_calib_man __move_z]
type: input
name: Move Z: {'%03.2f' % menu.input}
input: {printer.gcode_move.gcode_position.z}
input_step: 1
realtime: True
gcode:
{%- if menu.event == 'change' -%}
G1 Z{'%.2f' % menu.input}
{%- elif menu.event == 'long_click' -%}
G1 Z{'%.2f' % menu.input}
SAVE_GCODE_STATE NAME=__move__axis
G91
G1 Z2
G1 Z-2
RESTORE_GCODE_STATE NAME=__move__axis
{%- endif -%}
[menu __main __setup __calib __delta_calib_man __test_z]
type: input
name: Test Z: {['++','+','+.01','+.05','+.1','+.5','-.5','-.1','-.05','-.01','-','--'][menu.input|int]}
input: 6
input_min: 0
input_max: 11
input_step: 1
gcode:
{%- if menu.event == 'long_click' -%}
TESTZ Z={['++','+','+.01','+.05','+.1','+.5','-.5','-.1','-.05','-.01','-','--'][menu.input|int]}
{%- endif -%}
[menu __main __setup __calib __delta_calib_man __accept]
type: command
name: Accept
gcode: ACCEPT
[menu __main __setup __calib __delta_calib_man __abort]
type: command
name: Abort
gcode: ABORT
[menu __main __setup __dump]
type: command
name: Dump parameters
gcode:
{% for name1 in printer %}
{% for name2 in printer[name1] %}
{ action_respond_info("printer['%s'].%s = %s"
% (name1, name2, printer[name1][name2])) }
{% else %}
{ action_respond_info("printer['%s'] = %s" % (name1, printer[name1])) }
{% endfor %}
{% endfor %}

1009
klipper/DNV-TPU-Ender3/klipper_config/printer-20230405_194210.cfg
View File

File diff suppressed because it is too large Load Diff

1010
klipper/DNV-TPU-Ender3/klipper_config/printer-20230412_175951.cfg
View File

File diff suppressed because it is too large Load Diff

1
klipper/DNV-TPU-Ender3/klipper_config/printer.cfg
View File

@@ -184,6 +184,7 @@ pin: EXP1_1
[virtual_sdcard] [virtual_sdcard]
path: ~/printer_data/gcodes path: ~/printer_data/gcodes
on_error_gcode: CANCEL_PRINT
[display_status] [display_status]