jschuh klipper macros geupdated van zijn github

klipper/DNV-TPU-Ender3/klipper_config/klipper-macros-main/beep.cfg

@@ -0,0 +1,30 @@
+# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+[gcode_macro m300]
+description: Emits and audible beep.
+  Usage: M300 [P<duration>] [S<frequency>]
+gcode:
+  {% set settings = printer.configfile.settings %}
+  {% if "output_pin beeper" in printer or "pwm_cycle_time beeper" in printer %}
+    {% set P = (params.P|default(100)|int, 0)|max %}
+    {% set S = (params.S|default(1000)|int, 1)|max %}
+    SET_PIN PIN=beeper VALUE={% if "output_pin beeper" in settings %}1{%else%}{
+        settings["pwm_cycle_time beeper"].scale|default(1.0) * 0.5
+      } CYCLE_TIME={ 1.0 / S }{% endif %}
+    G4 P{P}
+    SET_PIN PIN=beeper VALUE=0
+  {% else %}
+    {action_respond_info(
+       "M300 is disabled. To enable create an [pwm_cycle_time beeper] config.")}
+  {% endif %}
+
+[gcode_macro _km_beep_if_available]
+description: Wraps beeper to avoid console spam
+gcode:
+  {% if "output_pin beeper" in printer or "pwm_cycle_time beeper" in printer %}
+    {% for i in range(params.BEEPS|int) %}
+      M300 P100
+      G4 P200
+    {% endfor %}
+  {% endif %}