printer.cfg opgedeeld in diverse bestanden en grootte van het bed aangepast

klipper/DNV-TPU-Ender3/klipper_config/macros/bed_mesh_org.cfg

@@ -0,0 +1,69 @@
+# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+#
+# Credit to original source:
+# https://gist.github.com/ChipCE/95fdbd3c2f3a064397f9610f915f7d02
+
+[gcode_macro bed_mesh_calibrate]
+rename_existing: _KM_BED_MESH_CALIBRATE_BASE
+description: Wraps BED_MESH_CALIBRATE, scaling probe count to specified area.
+  Usage: See Klipper documentation.
+gcode:
+  {% set km = printer["gcode_macro _km_globals"] %}
+  {% set probe_mesh_padding = km.probe_mesh_padding %}
+  {% set probe_min_count = km.probe_min_count %}
+  {% set probe_count_scale = km.probe_count_scale %}
+  {% set bed_mesh = printer.configfile.config.bed_mesh %}
+
+  # don't have the math functions available to work on a delta bed.
+  {%if "mesh_radius" not in bed_mesh %}
+    {% set safe_min_x = bed_mesh.mesh_min.split(",")[0]|float %}
+    {% set safe_min_y = bed_mesh.mesh_min.split(",")[1]|float %}
+    {% set safe_max_x = bed_mesh.mesh_max.split(",")[0]|float %}
+    {% set safe_max_y = bed_mesh.mesh_max.split(",")[1]|float %}
+
+    {% if "MESH_MIN" in params %}
+      {% set mesh_min_x = (params.MESH_MIN.split(",")[0]|float -
+                           probe_mesh_padding, safe_min_x)|max %}
+      {% set mesh_min_y = (params.MESH_MIN.split(",")[1]|float -
+                           probe_mesh_padding, safe_min_y)|max %}
+    {% else %}
+      {% set mesh_min_x = safe_min_x %}
+      {% set mesh_min_y = safe_min_y %}
+    {% endif %}
+    {% if "MESH_MAX" in params %}
+      {% set mesh_max_x = (params.MESH_MAX.split(",")[0]|float +
+                           probe_mesh_padding, safe_max_x)|min %}
+      {% set mesh_max_y = (params.MESH_MAX.split(",")[1]|float +
+                           probe_mesh_padding, safe_max_y)|min %}
+    {% else %}
+      {% set mesh_max_x = safe_max_x %}
+      {% set mesh_max_y = safe_max_y %}
+    {% endif %}
+
+    {% set max_x_probes = (params.PROBE_COUNT |
+                           default(bed_mesh.probe_count)).split(",")[0]|int %}
+    {% set max_y_probes = (params.PROBE_COUNT |
+                           default(bed_mesh.probe_count)).split(",")[1]|int %}
+
+    {% set x_probes = (max_x_probes * (mesh_max_x - mesh_min_x) /
+                      (safe_max_x - safe_min_x) * probe_count_scale)
+                      | round(0) | int %}
+    {% set x_probes = ((x_probes, probe_min_count)|max, max_x_probes)|min %}
+
+    {% set y_probes = (max_y_probes * (mesh_max_y - mesh_min_y ) /
+                      (safe_max_y - safe_min_y) * probe_count_scale )
+                      | round(0) | int %}
+    {% set y_probes = ((y_probes, probe_min_count)|max, max_y_probes)|min %}
+
+    {% set dummy = params.__setitem__("MESH_MIN", mesh_min_x~","~mesh_min_y) %}
+    {% set dummy = params.__setitem__("MESH_MAX", mesh_max_x~","~mesh_max_y) %}
+    {% set dummy = params.__setitem__("PROBE_COUNT", x_probes~","~y_probes) %}
+  {% endif %}
+  _km_bed_mesh_calibrate_base{%for k in params%}{
+      ' '~k~'="'~params[k]~'"'}{%endfor%}
+
+[gcode_macro g29]
+gcode:
+  BED_MESH_CALIBRATE