printer.cfg opgedeeld in diverse bestanden en grootte van het bed aangepast

2024-05-15 22:32:16 +02:00
parent acc9abf111
commit 42d596c820
16 changed files with 2055 additions and 757 deletions
--- a/klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/optional/bed_mesh.cfg
+++ b/klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/optional/bed_mesh.cfg
@@ -0,0 +1,18 @@
+# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+#
+# Credit to original source:
+# https://gist.github.com/ChipCE/95fdbd3c2f3a064397f9610f915f7d02
+
+[gcode_macro bed_mesh_calibrate]
+rename_existing: _KM_BED_MESH_CALIBRATE_BASE
+variable_km_override: True
+description: Wraps BED_MESH_CALIBRATE, scaling probe count to specified area.
+  Usage: See Klipper documentation.
+gcode:
+  BED_MESH_CALIBRATE_FAST{%for k in params%}{' '~k~'="'~params[k]~'"'}{%endfor%}
+
+[gcode_macro g29]
+gcode:
+  BED_MESH_CALIBRATE
--- a/klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/optional/lcd_menus.cfg
+++ b/klipper/DNV-TPU-Ender3/klipper_config/klipper-macros/optional/lcd_menus.cfg
@@ -0,0 +1,969 @@
+# Copyright (C) 2022 Justin Schuh <code@justinschuh.com>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+
+################################################################################
+# Existing menu refinements.
+################################################################################
+
+# Hide unused menus
+
+[menu __main __octoprint]
+type: list
+name: OctoPrint
+enable: {printer["gcode_macro _km_globals"].menu_show_octoprint}
+
+
+# Get the file list out of the SD card menu while printing.
+[menu __main __sdcard]
+type: list
+enable: {'virtual_sdcard' in printer and
+         printer["gcode_macro _km_globals"].menu_show_sdcard}
+name: SD Card
+
+[menu __main __sdcard __start]
+type: command
+enable: {printer.virtual_sdcard.file_path and
+         not printer.virtual_sdcard.is_active and
+         printer.print_stats.state != "printing" and
+         printer.print_stats.state != "paused"}
+name: Print: {printer.virtual_sdcard.file_path.split('/')|last}
+gcode:
+  M24
+  {menu.back()}
+
+[menu __main __sdcard __select]
+type: vsdlist
+enable: {not printer.virtual_sdcard.is_active and
+         printer.print_stats.state != "printing" and
+         printer.print_stats.state != "paused"}
+name: Select file
+index: 1
+
+[menu __main __sdcard __select __start]
+type: command
+enable: {printer.virtual_sdcard.file_path and
+         not printer.virtual_sdcard.is_active}
+name: Print: {printer.virtual_sdcard.file_path.split('/')|last}
+gcode:
+  M24
+  {menu.back()}
+
+[menu __main __setup __calib __delta_calib_auto]
+type: command
+enable: {'delta_calibrate' in printer.configfile.settings and
+         not printer.idle_timeout.state == "Printing"}
+name: Delta cal. auto
+gcode:
+    G28
+    DELTA_CALIBRATE
+
+[menu __main __setup __calib __delta_calib_man]
+type: list
+enable: {'delta_calibrate' in printer.configfile.settings and
+         not printer.idle_timeout.state == "Printing"}
+name: Delta cal. man
+
+# Require confirmation for anything that would abort an in-progress print.
+
+# Steppers off
+[menu __main __control __disable]
+type: command
+name: Steppers off
+enable: {printer.idle_timeout.state != "Printing"}
+gcode:
+  M84
+  M18
+
+[menu __main __control __disable_printing]
+type: list
+index: 3
+enable: {printer.idle_timeout.state == "Printing"}
+name: Steppers off
+
+[menu __my_main __control __disable_printing __confirm]
+type: command
+name: Confirm steppers off
+gcode:
+  M84
+  M18
+  {menu.back()}
+
+# Add a park menu item.
+[menu __main __control __park]
+type: command
+name: Park toolhead
+enable: {printer.idle_timeout.state != "Printing" or
+         printer.pause_resume.is_paused}
+index: 1
+gcode:
+  G28 O ; Lazy home first.
+  PARK
+
+# Octoprint abort
+[menu __main __octoprint __abort]
+type: list
+enable: {printer.idle_timeout.state == "Printing"}
+name: Abort printing
+
+[menu __main __octoprint __abort __confirm]
+type: command
+name: Confirm abort printing
+gcode:
+  {action_respond_info('action:cancel')}
+  {menu.back()}
+
+# SD card cancel
+[menu __main __sdcard __cancel]
+type: list
+enable: {('virtual_sdcard' in printer) and
+         (printer.print_stats.state == "printing" or
+          printer.print_stats.state == "paused")}
+name: Cancel printing
+
+[menu __main __sdcard __cancel __confirm]
+type: command
+name: Confirm cancel printing
+gcode:
+  {% if 'pause_resume' in printer %}
+    CANCEL_PRINT
+  {% else %}
+    M25
+    M27
+    M26 S0
+    TURN_OFF_HEATERS
+    G91
+    G0 Z{(printer.toolhead.position.z, printer.toolhead.axis_maximum.z - 5)|min
+        } F1000
+    G90
+  {% endif %}
+  {menu.back()}
+
+# Extra setup menu options
+
+# Shutdown and reboot
+[menu __main __setup __restart]
+type: list
+name: Restart/Shutdown
+
+[menu __main __setup __restart __reboot]
+type: command
+name: Reboot host
+gcode:
+  M117 Rebooting host
+  M118 Rebooting host
+  {menu.exit()}
+  G4 S2 ; Let the user see the console message.
+  {action_call_remote_method("reboot_machine")} ; Try Moonraker.
+  G4 S1 ; give Moonraker a chance to finish.
+  {action_respond_info('action:poweroff')} ; Try Octoprint.
+
+[menu __main __setup __restart __shutdown]
+type: command
+name: Shutdown host
+gcode:
+  M117 Shutting down
+  M118 Shutting down
+  {menu.exit()}
+  G4 S2 ; Let the user see the console message.
+  {action_call_remote_method("shutdown_machine")} ; Try Moonraker.
+  G4 S1 ; give Moonraker a chance to finish.
+  {action_respond_info('action:poweroff')} ; Try Octoprint.
+
+# Speed and flow
+[menu __main __setup __speed]
+type: input
+name: Speed: {'%3d' % (menu.input*100)}%
+input: {printer.gcode_move.speed_factor}
+input_min: 0.01
+input_max: 5
+input_step: 0.01
+realtime: True
+index: 4
+gcode:
+    M220 S{'%d' % (menu.input*100)}
+
+[menu __main __setup __flow]
+type: input
+name: Flow: {'%3d' % (menu.input*100)}%
+input: {printer.gcode_move.extrude_factor}
+input_min: 0.01
+input_max: 2
+input_step: 0.01
+realtime: True
+index: 5
+gcode:
+    M221 S{'%d' % (menu.input*100)}
+
+################################################################################
+# Replace filament loading with our own macros.
+################################################################################
+
+[menu __main __filament]
+type: list
+name: Filament
+enable: {printer.idle_timeout.state != "Printing" or
+         printer.pause_resume.is_paused}
+
+# Hide the old load/unload commands.
+[menu __main __filament __loadf]
+type: command
+name: Load Fil. fast
+enable: False
+
+[menu __main __filament __loads]
+type: command
+name: Load Fil. slow
+enable: False
+
+[menu __main __filament __unloadf]
+type: command
+name: Unload Fil.fast
+enable: False
+
+[menu __main __filament __unloads]
+type: command
+name: Unload Fil.slow
+enable: False
+
+# Add new load/unload using our macros.
+[menu __main __filament __load]
+type: command
+index: 1
+name: Load Filament
+gcode:
+  LOAD_FILAMENT
+
+[menu __main __filament __unload]
+type: command
+index: 2
+name: Unload Filament
+gcode:
+  UNLOAD_FILAMENT
+
+[menu __main __filament __feed]
+type: input
+name: Feed: {'%.1f' % menu.input}
+input: 0.0
+input_min: -50.0
+input_max: 50.0
+input_step: 1.0
+gcode:
+  SAVE_GCODE_STATE NAME=_KM_FILAMENT_LOAD
+  M83
+  G1 E{'%.1f' % menu.input
+   } F{printer["gcode_macro _km_globals"].load_priming_speed}
+  RESTORE_GCODE_STATE NAME=_KM_FILAMENT_LOAD
+
+################################################################################
+# Layer triggers.
+################################################################################
+
+[menu __main __sdcard __pause_layer]
+type: input
+index: 4
+enable: {('virtual_sdcard' in printer) and
+         printer.print_stats.state == "printing"}
+name: Pause {% set layer = printer["gcode_macro _km_layer_run"].cur_layer %}{%
+               if layer >= menu.input|int %}layer{%
+               elif layer + 1 == menu.input|int %}at: next{%
+               else %}at: {menu.input|int}{% endif %}
+input: {printer["gcode_macro _km_layer_run"].cur_layer}
+input_min: {printer["gcode_macro _km_layer_run"].cur_layer}
+input_max: {printer["gcode_macro _km_layer_run"].tot_layers}
+input_step: 1
+gcode:
+  {% set layers = printer["gcode_macro _km_layer_run"] %}
+  {% if menu.input|int > layers.cur_layer %}
+    PAUSE_AT_LAYER LAYER={menu.input}
+  {% endif %}
+
+[menu __main __octoprint __pause_layer]
+type: input
+index: 1
+enable: {printer.idle_timeout.state == "Printing"}
+name: Pause {% set layer = printer["gcode_macro _km_layer_run"].cur_layer %}{%
+               if layer >= menu.input|int %}layer{%
+               elif layer + 1 == menu.input|int + 1 %}at: next{%
+               else %}at: {menu.input|int}{% endif %}
+input: {printer["gcode_macro _km_layer_run"].cur_layer}
+input_min: {printer["gcode_macro _km_layer_run"].cur_layer}
+input_max: {printer["gcode_macro _km_layer_run"].tot_layers}
+input_step: 1
+gcode:
+  {% set layers = printer["gcode_macro _km_layer_run"] %}
+  {% if menu.input|int > layers.cur_layer %}
+    GCODE_AT_LAYER LAYER={menu.input|int
+                 } COMMAND="RESPOND TYPE=command MSG=action:pause"
+  {% endif %}
+
+################################################################################
+# Bed surface.
+################################################################################
+
+[menu __main __setup __bed_surface]
+type: input
+name: Bed: {(printer.save_variables.variables.bed_surfaces.available
+             | list | sort)[menu.input|int]}
+input: {% set surfaces = printer.save_variables.variables.bed_surfaces
+         %}{(surfaces.available | list | sort).index(surfaces.active) | int}
+input_min: 0
+input_max: {((printer.save_variables.variables.bed_surfaces.available
+              | length) - 1)}
+input_step: 1
+index: 4
+gcode:
+  SET_SURFACE_ACTIVE SURFACE={
+      (printer.save_variables.variables.bed_surfaces.available
+       | list | sort)[menu.input|int]}
+
+[menu __main __setup __offsetz]
+type: input
+name: Offset Z:{ '%05.3f' % menu.input }
+input: {% set surfaces = printer.save_variables.variables.bed_surfaces
+         %}{ surfaces.available[surfaces.active].offset | float }
+input_min: -5
+input_max: 5
+input_step: 0.005
+index: 5
+realtime: True
+gcode:
+  SET_SURFACE_OFFSET OFFSET={menu.input}
+
+[menu __main __tune __offsetz]
+type: input
+name: Offset Z:{ '%05.3f' % menu.input }
+input: { printer.gcode_move.homing_origin.z }
+input_min: -5
+input_max: 5
+input_step: 0.005
+realtime: True
+gcode:
+  SET_SURFACE_OFFSET OFFSET={menu.input}
+
+################################################################################
+# Heater overrides.
+################################################################################
+
+### menu temperature ###
+
+# Hide the original menu
+[menu __main __temp]
+type: list
+name: Temperature
+enable: False
+
+[menu __main __temp_km]
+type: list
+name: Temperature
+index: 4
+
+[menu __main __temp_km __hotend0_target]
+type: input
+enable: {'extruder' in printer}
+name: {"Ex0:%3.0f (%4.0f)" % (menu.input, printer.extruder.temperature)}
+input: {printer.extruder.target}
+input_min: 0
+input_max: {printer.configfile.config.extruder.max_temp}
+input_step: 1
+gcode: SET_HEATER_TEMPERATURE HEATER=extruder TARGET={'%.0f' % menu.input}
+
+[menu __main __temp_km __hotend1_target]
+type: input
+enable: {'extruder1' in printer}
+name: {"Ex1:%3.0f (%4.0f)" % (menu.input, printer.extruder1.temperature)}
+input: {printer.extruder1.target}
+input_min: 0
+input_max: {printer.configfile.config.extruder1.max_temp}
+input_step: 1
+gcode: SET_HEATER_TEMPERATURE HEATER=extruder1 TARGET={'%.0f' % menu.input}
+
+[menu __main __temp_km __hotbed_target]
+type: input
+enable: {'heater_bed' in printer}
+name: {"Bed:%3.0f (%4.0f)" % (menu.input, printer.heater_bed.temperature)}
+input: {printer.heater_bed.target}
+input_min: 0
+input_max: {printer.configfile.config.heater_bed.max_temp}
+input_step: 1
+gcode: SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={'%.0f' % menu.input}
+
+# We just create 10 preheat placeholders below, and dynamically enable and fill
+# them in from the dictionary in variable_menu_temperature.
+
+## Pre-heat [0] ##
+[menu __main __temp_km __preheat_0]
+type: list
+name: Preheat {printer["gcode_macro _km_globals"].menu_temperature[0].name}
+enable: {printer.idle_timeout.state != "Printing" and
+         printer["gcode_macro _km_globals"].menu_temperature|length > 0}
+
+[menu __main __temp_km __preheat_0 __all]
+type: command
+enable: {printer["gcode_macro _km_globals"].menu_temperature[0] | list |
+           select('in', ['extruder', 'bed', 'chamber']) | list | length > 1 and
+         (('extruder' in printer) + ('heater_bed' in printer) +
+          ('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
+name: Preheat all
+gcode:
+  {% set targets = printer["gcode_macro _km_globals"].menu_temperature[0] %}
+  {% if 'chamber' in targets and 'extruder' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=chamber TARGET={targets.chamber}
+  {% endif %}
+  {% if 'bed' in targets and 'heater_bed' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={targets.bed}
+  {% endif %}
+  {% if 'extruder' in targets and 'extruder' in printer %}
+    SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
+      targets.extruder}
+  {% endif %}
+
+[menu __main __temp_km __preheat_0 __hotend]
+type: command
+enable: {'extruder' in printer and
+         'extruder' in printer["gcode_macro _km_globals"].menu_temperature[0]}
+name: Preheat hotend
+gcode:
+  SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[0].extruder}
+
+[menu __main __temp_km __preheat_0 __hotbed]
+type: command
+enable: {'heater_bed' in printer and
+         'bed' in printer["gcode_macro _km_globals"].menu_temperature[0]}
+name: Preheat bed
+gcode:
+  SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[0].bed}
+
+[menu __main __temp_km __preheat_0 __chamber]
+type: command
+enable: {'heater_generic chamber' in printer.heaters.available_heaters and
+         'chamber' in printer["gcode_macro _km_globals"].menu_temperature[0]}
+name: Preheat chamber
+gcode:
+  SET_HEATER_TEMPERATURE HEATER=chamber TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[0].chamber}
+
+## Pre-heat [1] ##
+[menu __main __temp_km __preheat_1]
+type: list
+name: Preheat {printer["gcode_macro _km_globals"].menu_temperature[1].name}
+enable: {printer.idle_timeout.state != "Printing" and
+         printer["gcode_macro _km_globals"].menu_temperature|length > 1}
+
+[menu __main __temp_km __preheat_1 __all]
+type: command
+enable: {printer["gcode_macro _km_globals"].menu_temperature[1] | list |
+           select('in', ['extruder', 'bed', 'chamber']) | list | length > 1 and
+         (('extruder' in printer) + ('heater_bed' in printer) +
+          ('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
+name: Preheat all
+gcode:
+  {% set targets = printer["gcode_macro _km_globals"].menu_temperature[1] %}
+  {% if 'chamber' in targets and 'extruder' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=chamber TARGET={targets.chamber}
+  {% endif %}
+  {% if 'bed' in targets and 'heater_bed' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={targets.bed}
+  {% endif %}
+  {% if 'extruder' in targets and 'extruder' in printer %}
+    SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
+      targets.extruder}
+  {% endif %}
+
+[menu __main __temp_km __preheat_1 __hotend]
+type: command
+enable: {'extruder' in printer and
+         'extruder' in printer["gcode_macro _km_globals"].menu_temperature[1]}
+name: Preheat hotend
+gcode:
+  SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[1].extruder}
+
+[menu __main __temp_km __preheat_1 __hotbed]
+type: command
+enable: {'heater_bed' in printer and
+         'bed' in printer["gcode_macro _km_globals"].menu_temperature[1]}
+name: Preheat bed
+gcode:
+  SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[1].bed}
+
+[menu __main __temp_km __preheat_1 __chamber]
+type: command
+enable: {'heater_generic chamber' in printer.heaters.available_heaters and
+         'chamber' in printer["gcode_macro _km_globals"].menu_temperature[1]}
+name: Preheat chamber
+gcode:
+  SET_HEATER_TEMPERATURE HEATER=chamber TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[1].chamber}
+
+## Pre-heat [2] ##
+[menu __main __temp_km __preheat_2]
+type: list
+name: Preheat {printer["gcode_macro _km_globals"].menu_temperature[2].name}
+enable: {printer.idle_timeout.state != "Printing" and
+         printer["gcode_macro _km_globals"].menu_temperature|length > 2}
+
+[menu __main __temp_km __preheat_2 __all]
+type: command
+enable: {printer["gcode_macro _km_globals"].menu_temperature[2] | list |
+           select('in', ['extruder', 'bed', 'chamber']) | list | length > 1 and
+         (('extruder' in printer) + ('heater_bed' in printer) +
+          ('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
+name: Preheat all
+gcode:
+  {% set targets = printer["gcode_macro _km_globals"].menu_temperature[2] %}
+  {% if 'chamber' in targets and 'extruder' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=chamber TARGET={targets.chamber}
+  {% endif %}
+  {% if 'bed' in targets and 'heater_bed' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={targets.bed}
+  {% endif %}
+  {% if 'extruder' in targets and 'extruder' in printer %}
+    SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
+      targets.extruder}
+  {% endif %}
+
+[menu __main __temp_km __preheat_2 __hotend]
+type: command
+enable: {'extruder' in printer and
+         'extruder' in printer["gcode_macro _km_globals"].menu_temperature[2]}
+name: Preheat hotend
+gcode:
+  SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[2].extruder}
+
+[menu __main __temp_km __preheat_2 __hotbed]
+type: command
+enable: {'heater_bed' in printer and
+         'bed' in printer["gcode_macro _km_globals"].menu_temperature[2]}
+name: Preheat bed
+gcode:
+  SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[2].bed}
+
+[menu __main __temp_km __preheat_2 __chamber]
+type: command
+enable: {'heater_generic chamber' in printer.heaters.available_heaters and
+         'chamber' in printer["gcode_macro _km_globals"].menu_temperature[2]}
+name: Preheat chamber
+gcode:
+  SET_HEATER_TEMPERATURE HEATER=chamber TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[2].chamber}
+
+## Pre-heat [3] ##
+[menu __main __temp_km __preheat_3]
+type: list
+name: Preheat {printer["gcode_macro _km_globals"].menu_temperature[3].name}
+enable: {printer.idle_timeout.state != "Printing" and
+         printer["gcode_macro _km_globals"].menu_temperature|length > 3}
+
+[menu __main __temp_km __preheat_3 __all]
+type: command
+enable: {printer["gcode_macro _km_globals"].menu_temperature[3] | list |
+           select('in', ['extruder', 'bed', 'chamber']) | list | length > 1 and
+         (('extruder' in printer) + ('heater_bed' in printer) +
+          ('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
+name: Preheat all
+gcode:
+  {% set targets = printer["gcode_macro _km_globals"].menu_temperature[3] %}
+  {% if 'chamber' in targets and 'extruder' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=chamber TARGET={targets.chamber}
+  {% endif %}
+  {% if 'bed' in targets and 'heater_bed' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={targets.bed}
+  {% endif %}
+  {% if 'extruder' in targets and 'extruder' in printer %}
+    SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
+      targets.extruder}
+  {% endif %}
+
+[menu __main __temp_km __preheat_3 __hotend]
+type: command
+enable: {'extruder' in printer and
+         'extruder' in printer["gcode_macro _km_globals"].menu_temperature[3]}
+name: Preheat hotend
+gcode:
+  SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[3].extruder}
+
+[menu __main __temp_km __preheat_3 __hotbed]
+type: command
+enable: {'heater_bed' in printer and
+         'bed' in printer["gcode_macro _km_globals"].menu_temperature[3]}
+name: Preheat bed
+gcode:
+  SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[3].bed}
+
+[menu __main __temp_km __preheat_3 __chamber]
+type: command
+enable: {'heater_generic chamber' in printer.heaters.available_heaters and
+         'chamber' in printer["gcode_macro _km_globals"].menu_temperature[3]}
+name: Preheat chamber
+gcode:
+  SET_HEATER_TEMPERATURE HEATER=chamber TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[3].chamber}
+
+## Pre-heat [4] ##
+[menu __main __temp_km __preheat_4]
+type: list
+name: Preheat {printer["gcode_macro _km_globals"].menu_temperature[4].name}
+enable: {printer.idle_timeout.state != "Printing" and
+         printer["gcode_macro _km_globals"].menu_temperature|length > 4}
+
+[menu __main __temp_km __preheat_4 __all]
+type: command
+enable: {printer["gcode_macro _km_globals"].menu_temperature[4] | list |
+           select('in', ['extruder', 'bed', 'chamber']) | list | length > 1 and
+         (('extruder' in printer) + ('heater_bed' in printer) +
+          ('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
+name: Preheat all
+gcode:
+  {% set targets = printer["gcode_macro _km_globals"].menu_temperature[4] %}
+  {% if 'chamber' in targets and 'extruder' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=chamber TARGET={targets.chamber}
+  {% endif %}
+  {% if 'bed' in targets and 'heater_bed' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={targets.bed}
+  {% endif %}
+  {% if 'extruder' in targets and 'extruder' in printer %}
+    SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
+      targets.extruder}
+  {% endif %}
+
+[menu __main __temp_km __preheat_4 __hotend]
+type: command
+enable: {'extruder' in printer and
+         'extruder' in printer["gcode_macro _km_globals"].menu_temperature[4]}
+name: Preheat hotend
+gcode:
+  SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[4].extruder}
+
+[menu __main __temp_km __preheat_4 __hotbed]
+type: command
+enable: {'heater_bed' in printer and
+         'bed' in printer["gcode_macro _km_globals"].menu_temperature[4]}
+name: Preheat bed
+gcode:
+  SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[4].bed}
+
+[menu __main __temp_km __preheat_4 __chamber]
+type: command
+enable: {'heater_generic chamber' in printer.heaters.available_heaters and
+         'chamber' in printer["gcode_macro _km_globals"].menu_temperature[4]}
+name: Preheat chamber
+gcode:
+  SET_HEATER_TEMPERATURE HEATER=chamber TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[4].chamber}
+
+## Pre-heat [5] ##
+[menu __main __temp_km __preheat_5]
+type: list
+name: Preheat {printer["gcode_macro _km_globals"].menu_temperature[5].name}
+enable: {printer.idle_timeout.state != "Printing" and
+         printer["gcode_macro _km_globals"].menu_temperature|length > 5}
+
+[menu __main __temp_km __preheat_5 __all]
+type: command
+enable: {printer["gcode_macro _km_globals"].menu_temperature[5] | list |
+           select('in', ['extruder', 'bed', 'chamber']) | list | length > 1 and
+         (('extruder' in printer) + ('heater_bed' in printer) +
+          ('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
+name: Preheat all
+gcode:
+  {% set targets = printer["gcode_macro _km_globals"].menu_temperature[5] %}
+  {% if 'chamber' in targets and 'extruder' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=chamber TARGET={targets.chamber}
+  {% endif %}
+  {% if 'bed' in targets and 'heater_bed' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={targets.bed}
+  {% endif %}
+  {% if 'extruder' in targets and 'extruder' in printer %}
+    SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
+      targets.extruder}
+  {% endif %}
+
+[menu __main __temp_km __preheat_5 __hotend]
+type: command
+enable: {'extruder' in printer and
+         'extruder' in printer["gcode_macro _km_globals"].menu_temperature[5]}
+name: Preheat hotend
+gcode:
+  SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[5].extruder}
+
+[menu __main __temp_km __preheat_5 __hotbed]
+type: command
+enable: {'heater_bed' in printer and
+         'bed' in printer["gcode_macro _km_globals"].menu_temperature[5]}
+name: Preheat bed
+gcode:
+  SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[5].bed}
+
+[menu __main __temp_km __preheat_5 __chamber]
+type: command
+enable: {'heater_generic chamber' in printer.heaters.available_heaters and
+         'chamber' in printer["gcode_macro _km_globals"].menu_temperature[5]}
+name: Preheat chamber
+gcode:
+  SET_HEATER_TEMPERATURE HEATER=chamber TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[5].chamber}
+
+## Pre-heat [6] ##
+[menu __main __temp_km __preheat_6]
+type: list
+name: Preheat {printer["gcode_macro _km_globals"].menu_temperature[6].name}
+enable: {printer.idle_timeout.state != "Printing" and
+         printer["gcode_macro _km_globals"].menu_temperature|length > 6}
+
+[menu __main __temp_km __preheat_6 __all]
+type: command
+enable: {printer["gcode_macro _km_globals"].menu_temperature[6] | list |
+           select('in', ['extruder', 'bed', 'chamber']) | list | length > 1 and
+         (('extruder' in printer) + ('heater_bed' in printer) +
+          ('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
+name: Preheat all
+gcode:
+  {% set targets = printer["gcode_macro _km_globals"].menu_temperature[6] %}
+  {% if 'chamber' in targets and 'extruder' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=chamber TARGET={targets.chamber}
+  {% endif %}
+  {% if 'bed' in targets and 'heater_bed' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={targets.bed}
+  {% endif %}
+  {% if 'extruder' in targets and 'extruder' in printer %}
+    SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
+      targets.extruder}
+  {% endif %}
+
+[menu __main __temp_km __preheat_6 __hotend]
+type: command
+enable: {'extruder' in printer and
+         'extruder' in printer["gcode_macro _km_globals"].menu_temperature[6]}
+name: Preheat hotend
+gcode:
+  SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[6].extruder}
+
+[menu __main __temp_km __preheat_6 __hotbed]
+type: command
+enable: {'heater_bed' in printer and
+         'bed' in printer["gcode_macro _km_globals"].menu_temperature[6]}
+name: Preheat bed
+gcode:
+  SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[6].bed}
+
+[menu __main __temp_km __preheat_6 __chamber]
+type: command
+enable: {'heater_generic chamber' in printer.heaters.available_heaters and
+         'chamber' in printer["gcode_macro _km_globals"].menu_temperature[6]}
+name: Preheat chamber
+gcode:
+  SET_HEATER_TEMPERATURE HEATER=chamber TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[6].chamber}
+
+## Pre-heat [7] ##
+[menu __main __temp_km __preheat_7]
+type: list
+name: Preheat {printer["gcode_macro _km_globals"].menu_temperature[7].name}
+enable: {printer.idle_timeout.state != "Printing" and
+         printer["gcode_macro _km_globals"].menu_temperature|length > 7}
+
+[menu __main __temp_km __preheat_7 __all]
+type: command
+enable: {printer["gcode_macro _km_globals"].menu_temperature[7] | list |
+           select('in', ['extruder', 'bed', 'chamber']) | list | length > 1 and
+         (('extruder' in printer) + ('heater_bed' in printer) +
+          ('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
+name: Preheat all
+gcode:
+  {% set targets = printer["gcode_macro _km_globals"].menu_temperature[7] %}
+  {% if 'chamber' in targets and 'extruder' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=chamber TARGET={targets.chamber}
+  {% endif %}
+  {% if 'bed' in targets and 'heater_bed' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={targets.bed}
+  {% endif %}
+  {% if 'extruder' in targets and 'extruder' in printer %}
+    SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
+      targets.extruder}
+  {% endif %}
+
+[menu __main __temp_km __preheat_7 __hotend]
+type: command
+enable: {'extruder' in printer and
+         'extruder' in printer["gcode_macro _km_globals"].menu_temperature[7]}
+name: Preheat hotend
+gcode:
+  SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[7].extruder}
+
+[menu __main __temp_km __preheat_7 __hotbed]
+type: command
+enable: {'heater_bed' in printer and
+         'bed' in printer["gcode_macro _km_globals"].menu_temperature[7]}
+name: Preheat bed
+gcode:
+  SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[7].bed}
+
+[menu __main __temp_km __preheat_7 __chamber]
+type: command
+enable: {'heater_generic chamber' in printer.heaters.available_heaters and
+         'chamber' in printer["gcode_macro _km_globals"].menu_temperature[7]}
+name: Preheat chamber
+gcode:
+  SET_HEATER_TEMPERATURE HEATER=chamber TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[7].chamber}
+
+## Pre-heat [8] ##
+[menu __main __temp_km __preheat_8]
+type: list
+name: Preheat {printer["gcode_macro _km_globals"].menu_temperature[8].name}
+enable: {printer.idle_timeout.state != "Printing" and
+         printer["gcode_macro _km_globals"].menu_temperature|length > 8}
+
+[menu __main __temp_km __preheat_8 __all]
+type: command
+enable: {printer["gcode_macro _km_globals"].menu_temperature[8] | list |
+           select('in', ['extruder', 'bed', 'chamber']) | list | length > 1 and
+         (('extruder' in printer) + ('heater_bed' in printer) +
+          ('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
+name: Preheat all
+gcode:
+  {% set targets = printer["gcode_macro _km_globals"].menu_temperature[8] %}
+  {% if 'chamber' in targets and 'extruder' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=chamber TARGET={targets.chamber}
+  {% endif %}
+  {% if 'bed' in targets and 'heater_bed' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={targets.bed}
+  {% endif %}
+  {% if 'extruder' in targets and 'extruder' in printer %}
+    SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
+      targets.extruder}
+  {% endif %}
+
+[menu __main __temp_km __preheat_8 __hotend]
+type: command
+enable: {'extruder' in printer and
+         'extruder' in printer["gcode_macro _km_globals"].menu_temperature[8]}
+name: Preheat hotend
+gcode:
+  SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[8].extruder}
+
+[menu __main __temp_km __preheat_8 __hotbed]
+type: command
+enable: {'heater_bed' in printer and
+         'bed' in printer["gcode_macro _km_globals"].menu_temperature[8]}
+name: Preheat bed
+gcode:
+  SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[8].bed}
+
+[menu __main __temp_km __preheat_8 __chamber]
+type: command
+enable: {'heater_generic chamber' in printer.heaters.available_heaters and
+         'chamber' in printer["gcode_macro _km_globals"].menu_temperature[8]}
+name: Preheat chamber
+gcode:
+  SET_HEATER_TEMPERATURE HEATER=chamber TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[8].chamber}
+
+## Pre-heat [9] ##
+[menu __main __temp_km __preheat_9]
+type: list
+name: Preheat {printer["gcode_macro _km_globals"].menu_temperature[9].name}
+enable: {printer.idle_timeout.state != "Printing" and
+         printer["gcode_macro _km_globals"].menu_temperature|length > 9}
+
+[menu __main __temp_km __preheat_9 __all]
+type: command
+enable: {printer["gcode_macro _km_globals"].menu_temperature[9] | list |
+           select('in', ['extruder', 'bed', 'chamber']) | list | length > 1 and
+         (('extruder' in printer) + ('heater_bed' in printer) +
+          ('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
+name: Preheat all
+gcode:
+  {% set targets = printer["gcode_macro _km_globals"].menu_temperature[9] %}
+  {% if 'chamber' in targets and 'extruder' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=chamber TARGET={targets.chamber}
+  {% endif %}
+  {% if 'bed' in targets and 'heater_bed' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={targets.bed}
+  {% endif %}
+  {% if 'extruder' in targets and 'extruder' in printer %}
+    SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
+      targets.extruder}
+  {% endif %}
+
+[menu __main __temp_km __preheat_9 __hotend]
+type: command
+enable: {'extruder' in printer and
+         'extruder' in printer["gcode_macro _km_globals"].menu_temperature[9]}
+name: Preheat hotend
+gcode:
+  SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[9].extruder}
+
+[menu __main __temp_km __preheat_9 __hotbed]
+type: command
+enable: {'heater_bed' in printer and
+         'bed' in printer["gcode_macro _km_globals"].menu_temperature[9]}
+name: Preheat bed
+gcode:
+  SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[9].bed}
+
+[menu __main __temp_km __preheat_9 __chamber]
+type: command
+enable: {'heater_generic chamber' in printer.heaters.available_heaters and
+         'chamber' in printer["gcode_macro _km_globals"].menu_temperature[9]}
+name: Preheat chamber
+gcode:
+  SET_HEATER_TEMPERATURE HEATER=chamber TARGET={
+    printer["gcode_macro _km_globals"].menu_temperature[9].chamber}
+
+## Cooldown ##
+[menu __main __temp_km __cooldown_all]
+type: command
+enable: {printer.idle_timeout.state != "Printing" and
+         (('extruder' in printer) + ('heater_bed' in printer) +
+          ('heater_generic chamber' in printer.heaters.available_heaters)) > 1}
+name: Cooldown all
+gcode:
+  {% if 'heater_generic chamber' in printer.heaters.available_heaters %}
+    SET_HEATER_TEMPERATURE HEATER=chamber TARGET=0
+  {% endif %}
+  {% if 'heater_bed' in printer %}
+    SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=0
+  {% endif %}
+  {% if 'extruder' in printer%}
+    SET_HEATER_TEMPERATURE HEATER={printer.toolhead.extruder} TARGET=0
+  {% endif %}
+
+[menu __main __temp_km __cooldown_hotend]
+type: command
+enable: {printer.idle_timeout.state != "Printing" and 'extruder' in printer}
+name: Cooldown hotend
+gcode: M104 S0
+
+[menu __main __temp_km __cooldown_hotbed]
+type: command
+enable: {printer.idle_timeout.state != "Printing" and 'heater_bed' in printer}
+name: Cooldown bed
+gcode: M140 S0
+
+[menu __main __temp_km __cooldown_chamber]
+type: command
+enable: {printer.idle_timeout.state != "Printing" and
+         'heater_generic chamber' in printer.heaters.available_heaters}
+name: Cooldown chamber
+gcode: M141 S0