Upload files to "klipper/DNV-TPU-Ender3/klipper_config"

klipper/DNV-TPU-Ender3/klipper_config/telegram.conf

@@ -0,0 +1,20 @@
+#  Please refer to the wiki(https://github.com/nlef/moonraker-telegram-bot/wiki) for detailed information on how to configure the bot
+
+[bot]
+server: localhost
+bot_token: 5714318282:AAF4IKQHvd-u_z7eFLh-VmMnsXPHWHlv7B0
+chat_id: 816592458
+
+#[camera]
+#host: http://localhost:8080/?action=stream
+
+[progress_notification]
+percent: 20
+height: 5
+#time: 5
+
+[timelapse]
+cleanup: true
+height: 0.2
+time: 5
+target_fps: 30

klipper/DNV-TPU-Ender3/klipper_config/webcam.txt

@@ -0,0 +1,79 @@
+### Windows users: To edit this file use Notepad++, VSCode, Atom or SublimeText.
+### Do not use Notepad or WordPad.
+
+### MacOSX users: If you use Textedit to edit this file make sure to use 
+### "plain text format" and "disable smart quotes" in "Textedit > Preferences"
+
+### Configure which camera to use
+#
+# Available options are:
+# - auto: tries first usb webcam, if that's not available tries raspi cam
+# - usb: only tries usb webcam
+# - raspi: only tries raspi cam
+#
+# Defaults to auto
+#
+#camera="auto"
+
+### Additional options to supply to MJPG Streamer for the USB camera
+#
+# See https://faq.octoprint.org/mjpg-streamer-config for available options
+#
+# Defaults to a resolution of 640x480 px and a framerate of 10 fps
+#
+#camera_usb_options="-r 960x720 -f 15"
+
+### Additional webcam devices known to cause problems with -f
+#
+# Apparently there a some devices out there that with the current 
+# mjpg_streamer release do not support the -f parameter (for specifying 
+# the capturing framerate) and will just refuse to output an image if it 
+# is supplied.
+#
+# The webcam daemon will detect those devices by their USB Vendor and Product
+# ID and remove the -f parameter from the options provided to mjpg_streamer.
+#
+# By default, this is done for the following devices:
+#   Logitech C170 (046d:082b)
+#   GEMBIRD (1908:2310)
+#   Genius F100 (0458:708c)
+#   Cubeternet GL-UPC822 UVC WebCam (1e4e:0102)
+#
+# Using the following option it is possible to add additional devices. If
+# your webcam happens to show above symptoms, try determining your cam's
+# vendor and product id via lsusb, activating the line below by removing # and 
+# adding it, e.g. for two broken cameras "aabb:ccdd" and "aabb:eeff"
+#
+#   additional_brokenfps_usb_devices=("aabb:ccdd" "aabb:eeff")
+#
+#
+#additional_brokenfps_usb_devices=()
+
+### Additional options to supply to MJPG Streamer for the RasPi Cam
+#
+# See https://faq.octoprint.org/mjpg-streamer-config for available options
+#
+# Defaults to 10fps
+#
+#camera_raspi_options="-fps 10"
+
+### Configuration of camera HTTP output
+#
+# Usually you should NOT need to change this at all! Only touch if you
+# know what you are doing and what the parameters mean.
+#
+# Below settings are used in the mjpg-streamer call like this:
+#
+#   -o "output_http.so -w $camera_http_webroot $camera_http_options"
+#
+# Current working directory is the mjpg-streamer base directory.
+#
+#camera_http_webroot="./www-mainsail"
+#camera_http_options="-n"
+
+### EXPERIMENTAL
+# Support for different streamer types.
+#
+# Available options:
+#   mjpeg [default] - stable MJPG-streamer
+#camera_streamer=mjpeg